I have a server on AWS platform running an app. The database is on postgreSQL. The authentication is with .pem archives.
A few days ago, I was reported that the space of database was reaching the asigned quota, so I increase the quota through the RDS module on the cloud.
After doing it, I can't log in through pgAdmin to check the database. Nothing else was modified.
When I try to log in at the database I get this message:"Failed to create the SSH tunnel. Error: Could not establish session to SSH gateway"
The loggin configuration has always been like this (before increasing the quota I was able lo log in without any problems):
Use SSH tunneling: yes
Tunnel host: the IP assigned is the same and is still available.
Tunnel port: the port number is specified
Username: the username is specified
Authentication: Identity File
Identity file: It exist at the local route on my PC.
How can I fix this problem?
Thanks in advance.
Related
I've created an AKS cluster and Flexible PostgreSQL database.
The postgresql database is public, and I made firewall entry while setting up the DB to allow local connection from my IP - which worked fine.
When I then tried to connect from AKS, I was unable to - I was getting timeouts.
Eventually, I clicked the setting to allow access from everywhere on azure
That fixed the timeouts, and I can now connect, but I get a new error:
no pg_hba.conf entry for host "**.**.***.203"
What am I doing wrong?
Problem
In general, there have been a ton of issues in connecting a remote service to a PostgreSQL database. The documentation for most services doesn't really have documentation for this since the task of connecting to a PostgreSQL database requires the Admin to modify both the postgresql.conf and pg_hba.conf files.
The current scenario is giving AppSmith remote access to the given server.
PostgreSQL needs to allow the following IP addresses at the pg_hba.conf: 18.223.74.85 and 3.131.104.27
Research SSL Connections and if one would be required in this case
Success Criteria:
Appsmith is able to connect to given database
Appsmith is able to read/write data to given database
Resolution Research
Allowing the above IP addresses to connect to the PostgreSQL database in the pg_hba.conf file and changing the postgresql.conf file to allow remote connections using listening_addresses = '*' did not resolve the issue. Appsmith is unable to connect to the database.
SSL Connection: SSL stands for Secure Sockets Layer and, in short, it's the standard technology for keeping an internet connection secure and safeguarding any sensitive data that is being sent between two systems, preventing criminals from reading and modifying any information transferred, including potential personal details.
SSL proved to be a dead-end for this issue with no resolution.
In order to create an SSL connection, the following steps must be followed (PostgreSQL SSL documentation: https://www.postgresql.org/docs/9.1/ssl-tcp.html):
OpenSSL needs to be installed on the host server (https://fedingo.com/how-to-install-openssl-in-ubuntu/). Determined that OpenSSL is already installed on the host server using openssl version -a.
Following the above steps from the postgresql documentation does not produce the desired result.
Following steps from https://www.cyberciti.biz/faq/postgresql-remote-access-or-connection/ does not work either.
Error in all cases on Appsmith: Failed to initialize pool: The connection attempt failed
Next-steps
Consult with the Stackoverflow community to see if anyone else is having a similar issue.
Similar issues have been found, but Appsmith documentation and the Stackoverflow community did not have the information needed to fulfill this issue. I will post the full case to the community.
I resolved this problem using ngrok to make a tcp tunnel on your localhost.
Donwload and conifg ngrok and create a new tunnel on terminal, just run ngrok tcp 5432 at terminal
After this, get the host/port and insert at Appsmith PostgreSQL Connection.
make sure your username/password is correct.
Image from host/port create on ngrok
Image to how config this host/port on Appsmith
I just setup aws rds and I'm trying to connect pgadmin to it. I put in the Endpoint and the port shown in the rds dashboard, and the username and password I set. When I try connecting, I get an error message saying: Unable to connect to server "host name" port "port" failed: timeout expired.
I also tried connecting prisma to it by running npx prisma migrate dev --name init and I also get an error saying P1001: Can't reach database server at "host name".
I made sure to set Publicly accessible to Yes, but it's still not working. What am I doing wrong and how can I fix it?
(For the settings, I used the default free tier settings.)
In the question thread, the security group is defined to accept All Traffic from all IPv6 addresses ::/0. Permission for IPv4 address should be added as well. You may want to address All Traffic for IPv4 address 0.0.0.0/0.
Ubuntu 16.04 LTS
I have followed the guides which all say the same thing; to enable remote connection to a postgres server, update the postgresql.conf file, update the pg_hba.conf file and make sure the port (5432) is open and firewall is not blocking.
When I attempt to connect to my server from the remote machine using the following command, I receive no response (for example, 'Connection refused...'). It hangs as if the firewall has DROP policy, but I checked and the host's firewall is ACCEPT all. Here is the command:
psql -h 45.67.82.123 -U postgres -p 5432 -d mydatabase
I have googled extensively and can't find anyone else who's psql request sits with no response from the host server.
Edit: I should mention I have been connecting locally on the host machine. I should also mention that the data directory on the host machine is in a non-default location. I have my cluster on a mounted drive, in case this could affect the remote connection.
Solution:
It is my first AWS instance and I didn't know they have their own firewall rules on the platform. So I was highly confused by the fact all my policies were ACCEPT on my server. Turns out you are behind AWS firewall and you have to go onto the platform to add/change security groups etc. In the past when I've used Digital Ocean droplets or Linodes, the firewall policy on the vps is all I need to change. AWS threw me another curveball there.
I am trying to connect AWS RDS PostgreSql from PgAdmin 3. I followed the below link
http://docs.aws.amazon.com/AmazonRDS/latest/UserGuide/USER_ConnectToPostgreSQLInstance.html
In Security Group, I also added PostgreSQL and All traffic as below
The "publicly accessible" flag was enabled (updated after Mark B's comment)
I got the error from PGAdmin3
Very appreciate for any suggestion
******UPDATE*******
I can connect pgAdminIII to AWS RDS successfully using home wifi, but cannot connect using office wifi.
My concern is:
Was the port 5432 blocked by office wifi?
How can I configure/update the port without impacting to current API?
Note: My current API is working well (CRUD)
Can you can test your connection to a DB instance using common Linux or Windows tools first?
From a Linux or Unix terminal, you can test the connection by typing the following (replace with the endpoint and with the port of your DB instance):
$nc -zv DB-instance-endpoint port
For example, the following shows a sample command and the return value:
$nc -zv postgresql1.c6c8mn7tsdgv0.us-west-2.rds.amazonaws.com 8299
Connection to postgresql1.c6c8mn7tsdgv0.us-west-2.rds.amazonaws.com
8299 port [tcp/vvr-data] succeeded!
Windows users can use Telnet to test the connection to a DB instance. Note that Telnet actions are not supported other than for testing the connection. If a connection is successful, the action returns no message. If a connection is not successful, you receive an error message such as the following:
C:>telnet sg-postgresql1.c6c8mntzhgv0.us-west-2.rds.amazonaws.com
8299
Connecting To sg-postgresql1.c6c8mntzhgv0.us-west-2.rds.amazonaws.com...Could not
open connection to the host, on port 819: Connect failed
If Telnet actions return success, then you are good to go.
If you are trying to access it from a network which is not listed for that port. you need to add inbound rules for those network IPs from AMAZON RDS system
You will also need to set Public accessibility true under Connect & security tab in RDS console.
Read this post.In your security group go to unbound rules and add my ip.
and make sure your database is public.
https://serverfault.com/questions/656079/unable-to-connect-to-public-postgresql-rds-instance