We recently had to reset our virtual environment, and thus had to reinstall jaseci_ai_kit via pip install jaseci_ai_kit. This commands runs fine for everyone in our group with a windows computer, but those of us with a mac receive a "legacy-install-failure" error for a package called sentencepiece. We were having trouble debugging this error ourselves (and sadly can't use any intent transitions until we do)
For linux you solve it by using this command
sudo apt update
sudo apt -y upgrade
sudo apt -y install --no-install-recommends git g++ build-essential pkg-config cmake
Related
I am trying to install snapd but giving this error.
Operating System - Red Hat Enterprise Linux release 8.6 (Ootpa)
Error:
Problem: package snapd-2.57.6-2.el8.x86_64 requires snapd-selinux = 2.57.6-2.el8, but none of the providers can be installed
- conflicting requests
- nothing provides selinux-policy >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
- nothing provides selinux-policy-base >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I have the same problem. There's a long discussion about this here: https://forum.snapcraft.io/t/trouble-installing-snapd-on-rhel-8/13140/2. It looks like the only way to do it, if you can install all the necessary build tools, is to build from sources, as one of the posts there suggests.(I couldn't do it on my system because it's having subscription management issues.)
I also tried using CR repository, as suggested in the instructions for CentOS here: https://snapcraft.io/docs/installing-snap-on-centos, but that didn't work for me, either (I guess it's really just for CentOS and not RHEL).
UPDATE:
I finally found a solution (where there's a will...)! I manually installed all the requirements, one by one, that weren't available in the epel-release repo. My process was the following:
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-4.14.3-19.el8.x86_64.rpm
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-libs-4.14.3-19.el8.x86_64.rpm
wget https://dl.rockylinux.org/pub/rocky/8/BaseOS/aarch64/os/Packages/s/selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libsemanage-2.9-9.el8.x86_64.rpm --allowerasing -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-2.9-19.el8.x86_64.rpm -y
sudo rpm -i --force rpm-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force rpm-libs-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-libsemanage-2.9-9.el8.x86_64.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-policycoreutils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-python-utils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/selinux-policy-minimum-3.14.3-108.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libseccomp-2.5.2-1.el8.x86_64.rpm -y
sudo yum install https://download-ib01.fedoraproject.org/pub/epel/8/Everything/x86_64/Packages/s/snapd-selinux-2.57.6-2.el8.noarch.rpm -y
sudo yum install snapd -y
sudo yum update snapd -y
It's conceivable that on your system something else will be missing. If you run into an error telling you that nothing provides package XYZ, you can find it here: https://centos.pkgs.org/8-stream/centos-baseos-x86_64/ and simply sudo yum install directly from the binary package URL; e.g.:
That's exactly what my process was, and here's what I have now:
$ cat /etc/redhat-release (base)
Red Hat Enterprise Linux release 8.2 (Ootpa)
$ snap --version (base)
snap 2.57.6-2.el8
snapd 2.52.1
series 16
rhel 8.2
kernel 4.18.0-193.6.3.el8_2.x86_64
I installed eSpeak NG by building it locally. I would like to uninstall it. I ran:
sudo apt-get remove espeak-ng-espeak
and
apt-get remove -y --purge espeak-ng
...but these are not effective in removing the binary from my system:
espeak-ng --version
Returns: eSpeak NG text-to-speech: 1.51-dev Data at: /usr/share/espeak-ng-data
I am not familiar with building packages from source, and I suspect I have to take additional measures to remove packages installed by this method. What are these measures?
Please help me.
i have try out alot of way to get install, upgrade my python3.7 to python3.9 yet it keep shows up error.
sudo apt-get install python3
(Python3 is already the newest version [3.7.3-1])
sudo apt-get upgrade python3
(Python3 is already the newest version [3.7.3-1])
sudo add-apt-repository ppa:deadsnakes/ppa
(file "/user/bin/add-apt-repository", line 95, in )
(sp = SoftwareProperties(options=options)
(....)
(Error: could not find a distribution template for Raspbian/buster)
sudo apt-get install build-essential python-dev libsqlite3-dev libreadline6-dev libgdbm-dev zlib1g-dev libbz2-dev sqlite3 zip
(after install 2 newly package)
sudo apt-get install python3 python3-dev
(still back to python3.7)
anyone know how to make it to python3.9?
you have to type this in terminal:
sudo apt install python3.9
but you never can upgrade your Linux python to a newer version. It is internal.
but you can install python3.9 and use virtualenv to use your code in python3.9
VS Code was installed in Kali Linux but I remove it using the following commands:
sudo apt-get purge code
sudo apt autoremove
as I need to install snap because it automatically updates software then I install snap using the following command:
sudo apt-get update
sudo apt-get install snapd
after all this I type the following commands to install vscode:
sudo snap install code --classic
but after all this. vs code isn't available in the applications menu and also can't detect using
code --version
Check if vs code is in the Snap installed list by running command
snap list
If it is in the list , try Running
snap run code
You download and install by manual
Download
wget https://az764295.vo.msecnd.net/stable/e5a624b788d92b8d34d1392e4c4d9789406efe8f/code_1.51.1-1605051630_amd64.deb
Give full permissin
chmod 777 code_1.51.1-1605051630_amd64.deb
Install
dpkg -i code_1.51.1-1605051630_amd64.deb
Done ✅
In Centos 6.4,when configure Emacs,it shows:
configure: error: The required function `tputs' was not found in any library.
The following libraries were tried (in order):
libtinfo, libncurses, libterminfo, libtermcap, libcurses
Please try installing whichever of these libraries is most appropriate
for your system, together with its header files.
For example, a libncurses-dev(el) or similar package.
How to fix it,what's the problem in it.
sudo yum install ncurses-devel
then ./configure again
Try to install libncurses-dev with
bash
apt-get install libncurses-dev
I'm on a Debian Wheezy derived distribution (CrunchBang)
Trying to install Emacs 24.5.1
Had to install libncurses5-dev, then run ./configure
$ sudo apt-get install ncurses-devel
...
E: Unable to locate package ncurses-devel
$ sudo apt-get install libncurses5-dev