In Centos 6.4,when configure Emacs,it shows:
configure: error: The required function `tputs' was not found in any library.
The following libraries were tried (in order):
libtinfo, libncurses, libterminfo, libtermcap, libcurses
Please try installing whichever of these libraries is most appropriate
for your system, together with its header files.
For example, a libncurses-dev(el) or similar package.
How to fix it,what's the problem in it.
sudo yum install ncurses-devel
then ./configure again
Try to install libncurses-dev with
bash
apt-get install libncurses-dev
I'm on a Debian Wheezy derived distribution (CrunchBang)
Trying to install Emacs 24.5.1
Had to install libncurses5-dev, then run ./configure
$ sudo apt-get install ncurses-devel
...
E: Unable to locate package ncurses-devel
$ sudo apt-get install libncurses5-dev
Related
I am trying to install snapd but giving this error.
Operating System - Red Hat Enterprise Linux release 8.6 (Ootpa)
Error:
Problem: package snapd-2.57.6-2.el8.x86_64 requires snapd-selinux = 2.57.6-2.el8, but none of the providers can be installed
- conflicting requests
- nothing provides selinux-policy >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
- nothing provides selinux-policy-base >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I have the same problem. There's a long discussion about this here: https://forum.snapcraft.io/t/trouble-installing-snapd-on-rhel-8/13140/2. It looks like the only way to do it, if you can install all the necessary build tools, is to build from sources, as one of the posts there suggests.(I couldn't do it on my system because it's having subscription management issues.)
I also tried using CR repository, as suggested in the instructions for CentOS here: https://snapcraft.io/docs/installing-snap-on-centos, but that didn't work for me, either (I guess it's really just for CentOS and not RHEL).
UPDATE:
I finally found a solution (where there's a will...)! I manually installed all the requirements, one by one, that weren't available in the epel-release repo. My process was the following:
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-4.14.3-19.el8.x86_64.rpm
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-libs-4.14.3-19.el8.x86_64.rpm
wget https://dl.rockylinux.org/pub/rocky/8/BaseOS/aarch64/os/Packages/s/selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libsemanage-2.9-9.el8.x86_64.rpm --allowerasing -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-2.9-19.el8.x86_64.rpm -y
sudo rpm -i --force rpm-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force rpm-libs-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-libsemanage-2.9-9.el8.x86_64.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-policycoreutils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-python-utils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/selinux-policy-minimum-3.14.3-108.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libseccomp-2.5.2-1.el8.x86_64.rpm -y
sudo yum install https://download-ib01.fedoraproject.org/pub/epel/8/Everything/x86_64/Packages/s/snapd-selinux-2.57.6-2.el8.noarch.rpm -y
sudo yum install snapd -y
sudo yum update snapd -y
It's conceivable that on your system something else will be missing. If you run into an error telling you that nothing provides package XYZ, you can find it here: https://centos.pkgs.org/8-stream/centos-baseos-x86_64/ and simply sudo yum install directly from the binary package URL; e.g.:
That's exactly what my process was, and here's what I have now:
$ cat /etc/redhat-release (base)
Red Hat Enterprise Linux release 8.2 (Ootpa)
$ snap --version (base)
snap 2.57.6-2.el8
snapd 2.52.1
series 16
rhel 8.2
kernel 4.18.0-193.6.3.el8_2.x86_64
It says it is not available in any source. Tried using the debian provided by oracle. It says libssl versions are incompatible. Any help in this regard.
Now, mysql workbench is available for ubuntu 19.04.
You can manually install after downloading the file.
Step 1:
Direct download link-
https://dev.mysql.com/downloads/file/?id=488567
OR
Visit here select your OS then download as per OS version
https://dev.mysql.com/downloads/workbench/
Step 2:
sudo apt install file_path_of_downloaded_workbench
Finish!!
I solved this problem by installing the libzip package, directly from the deb package. I found at https://ubuntu.pkgs.org/18.10/ubuntu-universe-amd64/libzip4_1.1.2-1.1_amd64.deb.html. Download and install libzip4, then install mysql-workbench from the apt or deb package, whichever you prefer.
on Ubuntu 19
1)I had to, preceding it on Ubuntu 19, also install manually a library libzip https://ubuntu.pkgs.org/18.10/ubuntu-universe-amd64/libzip4_1.1.2-1.1_amd64.deb.html
2) then manually selecting on a download page deb package for mysql workbench https://dev.mysql.com/downloads/workbench/
then install deb packages via a standard apt installer in a Downloads dir
sudo apt install ./libzip4_1.1.2-1.1_amd64.deb
and downloaded workbench deb package
sudo apt install ./mysql-workbench-community_8.0.16-1ubuntu18.04_amd64.deb
You can download the source code from https://dev.mysql.com/downloads/workbench/, compile it and install it. I did it that way and it works perfectly for me. I had to install several package dependencies and review some basic compiler details, but in the end the result was successful. Follow the INSTALL file instructions and consider removing the Werror option from the CMakeLists.txt. Download antlr-4.7.1-complete.jar from web, and then run:
cmake -Wno-dev -DWITH_ANTLR_JAR='path_to_antlr-4.7.1-complete.jar' -Wno-error
make
sudo make install
screenshoot 1
screenshoot 2
UBUNTU 19.04 disco dingo -> mysql-workbench install steps:
add mysql complete source list from: https://dev.mysql.com/get/mysql-apt-config_0.8.13-1_all.deb
install libs: sudo apt-get install libgtkmm-3.0 libpcre++*
add debian source list on "/etc/apt/sources.list" :
deb http://deb.debian.org/debian stretch main contrib non-free
deb-src http://deb.debian.org/debian stretch main
deb http://deb.debian.org/debian stretch-updates main contrib non-free
deb-src http://deb.debian.org/debian stretch-updates main
deb http://security.debian.org/ stretch/updates main contrib non-free
deb-src http://security.debian.org/ stretch/updates main
sudo apt update && sudo apt upgrade -y && sudo apt dist-upgrade -y
sudo apt-get install mysql-utilities mysql-common mysql-community*
sudo apt-get install mysql-workbench (finish!!)
works here!
Latest version of workbench does not support Ubuntu 19.04 and version for 19.10 will not work.
You have to download specific workbench version supported by 19.04 from the archive.
Visit https://downloads.mysql.com/archives/workbench/
Select product version 8.0.17,
download and install package mysql-workbench-community_8.0.17-1ubuntu19.04_amd64.deb
check out gdebi
gdebi is a tool resolving & installing dependencies, for more info http://manpages.ubuntu.com/manpages/bionic/man1/gdebi.1.html
1) Install libzip4
curl -OL http://launchpadlibrarian.net/260671111/libzip4_1.1.2-1.1_amd64.deb
sudo dpkg -i libzip4_1.1.2-1.1_amd64.deb
2) Then install MySQL workbench on Ubuntu 19.04 by running the commands:
curl -OL https://dev.mysql.com/get/Downloads/MySQLGUITools/mysql-workbench-
community_8.0.16-1ubuntu18.04_amd64.deb
sudo dpkg -i mysql-workbench-community_8.0.16-1ubuntu18.04_amd64.deb
3) Install missing dependencies (libatkmm-1.6-1v5, libglibmm-2.4-1v5, libgtk2.0-0, libgtkmm-3.0-1v5, libpcrecpp0v5, libpython2.7, libsigc++-2.0-0v5, libtinfo5) by this command.
sudo apt --fix-broken install
Hope this helps.
Download the .deb file from here
Install it using command
dpkg -i *.deb。
Now MYSQL-WORKBENCH for Ubuntu-19.04(Disco) is available.
To install mysql workbench form command line you need add dependencies manually.
Edit your /etc/apt/sources.list and Append following lines:
deb http://security.ubuntu.com/ubuntu cosmic-security main
deb http://cz.archive.ubuntu.com/ubuntu cosmic main universe
sudo apt-get update
Download mysql-workbench from 'Mysql Workbench-19.04 for Ubuntu' and install by giving execute permission to mysql-workbench-community_8.0.17-1ubuntu19.04_amd64.deb file.
Now it should work. :)
I see form my project document that I need to install python-pybind11 by using
sudo apt -y install python-pybind11
but I got error like this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package python-pybind11
I'm not sure if python-pybind11 is a valid package, where can I check it?
Use this to install pybind11:
pip install pybind11
Refer from Here.
In Ubuntu 18.04
apt-get install python-pybind11
On Mac,
brew install pybind11
In Ubuntu 16.04, you'll need to install yourself. One way is as follows:
# Some prerequisites (but not all of them)
apt-get install cmake
pip3 install pytest
# Clone, build and install
git clone https://github.com/pybind/pybind11.git
cd pybind11
mkdir build
cd build
cmake ..
make install
Reference
In some systems, you may need
sudo apt -y install python3-pybind11
I followed the installation guide and installed all the packages mentioned. However, I end up with this error message while running ./configure
checking for osgEarth with CFLAGS=" -fPIC -fno-stack-protector " LIBS=" -losgEarth -losgEarthUtil"... no
configure: error: Cannot find osgEarth 2.7 or later. Set WITH_OSGEARTH=no in configure.user to disable this feature or install an up to date version of osgEarth.
Here is a link to my config.log file : config.log
Cannot find osgEarth 2.7 or later
osgearth 2.7 for Ubuntu 16.04 → https://launchpad.net/~ubuntugis/+archive/ubuntu/ppa →
sudo add-apt-repository ppa:ubuntugis/ppa
sudo apt update
sudo apt install libosgearth-dev // you get "2.7"
// All prerequisites :
sudo apt install g++ libxml2-dev libosgearth-dev bison flex clang swig libqt5opengl5-dev qt5-qmake openjdk-8-jre libopenmpi-dev tcl8.5-dev tk8.5-dev
Installing the libgeos-dev package, and then editing the configure.user file in my OMnet++ source directory solved my problem.
$ sudo apt-get install libgeos-dev
Change the line #OSGEARTH_LIBS= to this:
OSGEARTH_LIBS=" -losgEarth -losgEarthUtil -lgeos_c "
Make sure to remove the # in the beginning.
Now run:
$ . setenv
$ ./configure
And it should work..
Others have also faced this problem before and have the fix mentioned here solved their issues:
http://gmt.soest.hawaii.edu/boards/1/topics/4621
https://trac.osgeo.org/postgis/changeset/11363
Answered by Attila Török on the omnetpp google group (omnetpp#googlegroups.com)
I am newbie for Cent os. Installing phantomjs on Cent os. Followed below steps but still facing issue.
Steps :
curl -O https://phantomjs.googlecode.com/files/phantomjs-1.9.1-linux-i686.tar.bz2.
tar xvf phantomjs-1.9.1-linux-i686.tar.bz2
cp phantomjs-1.9.1-linux-i686/bin/phantomjs /usr/local/bin
sudo yum install freetype
sudo yum install fontconfig
Above all steps completed successfully but when I try to hit phantomjs, it shows error "phantomjs: error while loading shared libraries: libfontconfig.so.1: cannot open shared object file: No such file or directory."
Thanks in advance.
Just make sure you successfully run
yum install fontconfig freetype freetype-devel fontconfig-devel libstdc++
and then try to install as usual.
To remove this error.
# sudo yum install fontconfig
If you are still facing the error, Run
# sudo yum install fontconfig freetype libfreetype.so.6 libfontconfig.so.1 libstdc++.so.6
Note :
If you are using ubuntu or debian, use apt-get install to install this package.
centos, NodeJS, html-pdf
sudo yum install fontconfig (worked for me)