I am trying to install snapd but giving this error.
Operating System - Red Hat Enterprise Linux release 8.6 (Ootpa)
Error:
Problem: package snapd-2.57.6-2.el8.x86_64 requires snapd-selinux = 2.57.6-2.el8, but none of the providers can be installed
- conflicting requests
- nothing provides selinux-policy >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
- nothing provides selinux-policy-base >= 3.14.3-108.el8 needed by snapd-selinux-2.57.6-2.el8.noarch
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I have the same problem. There's a long discussion about this here: https://forum.snapcraft.io/t/trouble-installing-snapd-on-rhel-8/13140/2. It looks like the only way to do it, if you can install all the necessary build tools, is to build from sources, as one of the posts there suggests.(I couldn't do it on my system because it's having subscription management issues.)
I also tried using CR repository, as suggested in the instructions for CentOS here: https://snapcraft.io/docs/installing-snap-on-centos, but that didn't work for me, either (I guess it's really just for CentOS and not RHEL).
UPDATE:
I finally found a solution (where there's a will...)! I manually installed all the requirements, one by one, that weren't available in the epel-release repo. My process was the following:
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-4.14.3-19.el8.x86_64.rpm
wget https://rpmfind.net/linux/centos/8-stream/BaseOS/x86_64/os/Packages/rpm-libs-4.14.3-19.el8.x86_64.rpm
wget https://dl.rockylinux.org/pub/rocky/8/BaseOS/aarch64/os/Packages/s/selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libsemanage-2.9-9.el8.x86_64.rpm --allowerasing -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-2.9-19.el8.x86_64.rpm -y
sudo rpm -i --force rpm-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force rpm-libs-4.14.3-19.el8.x86_64.rpm
sudo rpm -i --force selinux-policy-3.14.3-108.el8.noarch.rpm
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-libsemanage-2.9-9.el8.x86_64.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/python3-policycoreutils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/policycoreutils-python-utils-2.9-19.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/selinux-policy-minimum-3.14.3-108.el8.noarch.rpm -y
sudo yum install http://mirror.centos.org/centos/8-stream/BaseOS/x86_64/os/Packages/libseccomp-2.5.2-1.el8.x86_64.rpm -y
sudo yum install https://download-ib01.fedoraproject.org/pub/epel/8/Everything/x86_64/Packages/s/snapd-selinux-2.57.6-2.el8.noarch.rpm -y
sudo yum install snapd -y
sudo yum update snapd -y
It's conceivable that on your system something else will be missing. If you run into an error telling you that nothing provides package XYZ, you can find it here: https://centos.pkgs.org/8-stream/centos-baseos-x86_64/ and simply sudo yum install directly from the binary package URL; e.g.:
That's exactly what my process was, and here's what I have now:
$ cat /etc/redhat-release (base)
Red Hat Enterprise Linux release 8.2 (Ootpa)
$ snap --version (base)
snap 2.57.6-2.el8
snapd 2.52.1
series 16
rhel 8.2
kernel 4.18.0-193.6.3.el8_2.x86_64
We recently had to reset our virtual environment, and thus had to reinstall jaseci_ai_kit via pip install jaseci_ai_kit. This commands runs fine for everyone in our group with a windows computer, but those of us with a mac receive a "legacy-install-failure" error for a package called sentencepiece. We were having trouble debugging this error ourselves (and sadly can't use any intent transitions until we do)
For linux you solve it by using this command
sudo apt update
sudo apt -y upgrade
sudo apt -y install --no-install-recommends git g++ build-essential pkg-config cmake
I am attempting to install the latest PostGIS 3.0.x on CentOS 8, with no luck.
I don't think anyone is running PostGIS on RHEL 8 or CentOS 8, I can't understand why not. It does not seem possible to install.
I have successfully installed Postgres 12.0 by disabling the RHEL AppStream
Steps I took installing postgres 12 on CentOS 8:
1)
#dnf install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
2)
#dnf --disablerepo AppStream install postgresql12
#dnf --disablerepo AppStream install postgresql12-server
I am attempting now to install PostGIS.
#dnf list --available | grep postgis30
I see that postgis30_96 is the latest offered (as listed below):
postgis30_96.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-client-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-devel.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-docs.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-gui-debuginfo.x86_64 3.0.0alpha4-6.rhel8 pgdg96
postgis30_96-utils.x86_64 3.0.0alpha4-6.rhel8 pgdg96
When I try to install with the following command:
#dnf install postgis30_96
I get these errors:
Last metadata expiration check: 1:22:58 ago on Tue 15 Oct 2019 08:25:10 PM UTC.
Error:
Problem: cannot install the best candidate for the job
- nothing provides hdf5 needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
- nothing provides xerces-c needed by postgis30_96-3.0.0alpha4-6.rhel8.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
I look for xerces-c, and nothing is returned:
#dnf list --available | grep xerces-c
Where do I get xerces-c to install?
I look to see if hdf5 is available to install (dependency)
#dnf list --available | grep hdf5
and nothing is returned. How do I satisfy these dependencies, so that PostGIS will install?
I goto the hdf5 website, download the source and it's a BIG FAT MESS. The build/install instructions do not work - the code is out of sync with the install instructions.
I check the hdf5 website and find another set of build/install instructions, and they too are out of sync with the latest code base. I don't know which way is up with this project, if it's a zombie project out there on the web, seemingly alive, but nobody's home.
How do I get hdf5 easily onto my system and xerces-c so that nothing existing gets mucked up? I would prefer to install these through any somewhat sanctioned CentOS 8 package repo using dnf.
I can't log this issue on the PostGIS ticket tracking system. Logging a ticket there requires an OSGEO ID, and when I request a 'mantra' to get started, nothing is returned, no response,
OSGEO is yet another zombie project, nobody's home. https://www.osgeo.org/community/getting-started-osgeo/osgeo_userid/
Please respond only if you have actually done this yourself on a CentOS 8 machine or VM, while I appreciate suggestions, pointers or imaginations from others, it pollutes r/postgis reddit with misinformation, non-working solutions, and not only wastes my time with dead ends, but also the time of others.
Someone else inevitably comes along with the same problems and is misguided with these those that are well-intentioned, but provide incorrect or incomplete information.
I had the same problem and finally found the solution. I need postgis25 for postgresql10, so I typed this command
dnf --enablerepo=PowerTools install postgis25_10
The PowerTools repo has the packages from codeready-developer repo, from Redhat CodeReady Studio. It contains a lot of useful tools.
Cannot enable PowerTools for RHEL 8
https://access.redhat.com/discussions/5417621
Remarks: PowerTools is a CentOS repository. On RHEL 8 we have the CodeReady Builder repository!
I am now able to install PostGIS-3 for PostgreSQL-12 on RHEL-8.
Solution:
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
dnf install postgis30_12
Summing up the previous answers, these are the commands needed to install PostGIS-3 on CentOS-8:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
dnf --enablerepo=PowerTools install postgresql12-server postgresql12-contrib postgis30_12
Many of the answers were helpful. To sum up the steps I had to take and errors in the instructions at https://people.planetpostgresql.org/devrim/index.php?/archives/107-Installing-PostGIS-3.1-and-PostgreSQL-13-on-CentOS-8.html
As mentioned by Marcelo, for RHEL use code-ready, not powertools.
As mentioned in this thread, don't mix packages. Run dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
to get the pgdg repo before installing postgres. Then run dnf -qy module disable postgresql if needed then install postgres like sudo dnf install -y postgresql13-server
The command to install epel-repo listed here may not work. Try sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
Get the name of the latest postgis release with this command. sudo dnf list --available | grep postgis3 As mentioned by Nick, the second two digits are your postgres version.
Install postgis sudo dnf -y install postgis3x_xx I repeat, the second two digits are your postgres version.
So, in summary, to install postgres and postgis on my rhel8 sytstem, I ran these commands in this order.
sudo dnf -qy module disable postgresql
sudo dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
sudo dnf install -y postgresql13-server
sudo /usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl enable postgresql-13
sudo systemctl start postgresql-13
sudo dnf install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
sudo subscription-manager repos --enable codeready-builder-for-rhel-8-x86_64-rpms
sudo dnf -y install postgis31_13
The postgis30_96 packages are for Postgres 9.6. You need postgis30_12 for Postgres 12.
These packages are definitely in the repo, so if your dnf list isn't seeing them, it may be an instance of a known issue in which "yum/dnf refuse to find/install many packages from PGDG repository on RHEL8".
As a workaround, the Postgres Yum Howto recommends this installation procedure:
dnf -y install https://download.postgresql.org/pub/repos/yum/reporpms/EL-8-x86_64/pgdg-redhat-repo-latest.noarch.rpm
dnf -qy module disable postgresql
dnf install postgresql11-server postgresql11-contrib
Percona Postgresql 13 And Postgis 3.0
https://www.percona.com/doc/percona-repo-config/index.html
dnf remove postgresql
sudo dnf install https://repo.percona.com/yum/percona-release-latest.noarch.rpm
sudo percona-release setup ppg-13
You can refer here:
https://www.percona.com/doc/postgresql/LATEST/installing.html#using-the-rpm-format
sudo dnf module disable postgresql
sudo dnf install percona-postgresql13-server
sudo dnf install percona-pg_repack13
sudo dnf install percona-pgaudit
sudo dnf install percona-pgbackrest
sudo dnf install percona-patroni
sudo dnf install percona-pg-stat-monitor13
sudo dnf install percona-postgresql13-contrib
/usr/pgsql-13/bin/postgresql-13-setup initdb
sudo systemctl start postgresql-13
PostGIS
dnf -y config-manager --set-enabled PowerTools
dnf install -y postgis30_13 postgis30_13-client
What helped me in CentOS container (as a root):
yum -y install dnf-plugins-core && yum config-manager --set-enabled powertools
Installing dnf-plugins-core and enabling powertools.
I see form my project document that I need to install python-pybind11 by using
sudo apt -y install python-pybind11
but I got error like this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package python-pybind11
I'm not sure if python-pybind11 is a valid package, where can I check it?
Use this to install pybind11:
pip install pybind11
Refer from Here.
In Ubuntu 18.04
apt-get install python-pybind11
On Mac,
brew install pybind11
In Ubuntu 16.04, you'll need to install yourself. One way is as follows:
# Some prerequisites (but not all of them)
apt-get install cmake
pip3 install pytest
# Clone, build and install
git clone https://github.com/pybind/pybind11.git
cd pybind11
mkdir build
cd build
cmake ..
make install
Reference
In some systems, you may need
sudo apt -y install python3-pybind11
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
curl : Depends: libcurl4 (= 7.58.0-2ubuntu3.1) but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
You have to do some custom things in order to run mongodb 4.0 in ubuntu 18.10
sudo apt-get install libcurl3
locate libcurl3 file likely in /usr/lib/x86_64-linux-gnu/, make a LD_LIBRARY folder in home, copy the libcurl.so.4 there and rename to libcurl.so.3
mkdir ~/LD_LIBRARY
cp /usr/lib/x86_64-linux-gnu/libcurl.so.4 ~/LD_LIBRARY/
mv ~/LD_LIBRARY/libcurl.so.4 ~/LD_LIBRARY/libcurl.so.3
make a link of libcurl3 by:
cd ~/LD_LIBRARY
ln -s libcurl.so.3 libcurl.so.4
echo "export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:~/LD_LIBRARY/" >> ~/.bashrc
source ~/.bashrc
now start mongod it will run.
Also now you can install
sudo apt-get install libcurl4 php-curl
And use all the application require php-curl and libcurl4
Here is How I solve curl installation error:
First I install required version of libcurl4 on which curl depends:
sudo apt-get install curl
This command give error that
curl : Depends: libcurl4 (= 7.58.0-2ubuntu3.8ppa2) but it is not going to be installed
I first install libcurl4 required version which in my case is libcurl4-7.58.0-2ubuntu3.8ppa2 note in your case it my differ:
sudo apt-get install libcurl4=7.58.0-2ubuntu3.8ppa2
After installation of libcurl4 I install curl which get installed and work fine:
sudo apt-get install curl