What is the difference between the Unicode, UTF8, UTF7, UTF16, UTF32, ASCII, and ANSI encodings?
In what way are these helpful for programmers?
Going down your list:
"Unicode" isn't an encoding, although unfortunately, a lot of documentation imprecisely uses it to refer to whichever Unicode encoding that particular system uses by default. On Windows and Java, this often means UTF-16; in many other places, it means UTF-8. Properly, Unicode refers to the abstract character set itself, not to any particular encoding.
UTF-16: 2 bytes per "code unit". This is the native format of strings in .NET, and generally in Windows and Java. Values outside the Basic Multilingual Plane (BMP) are encoded as surrogate pairs. These used to be relatively rarely used, but now many consumer applications will need to be aware of non-BMP characters in order to support emojis.
UTF-8: Variable length encoding, 1-4 bytes per code point. ASCII values are encoded as ASCII using 1 byte.
UTF-7: Usually used for mail encoding. Chances are if you think you need it and you're not doing mail, you're wrong. (That's just my experience of people posting in newsgroups etc - outside mail, it's really not widely used at all.)
UTF-32: Fixed width encoding using 4 bytes per code point. This isn't very efficient, but makes life easier outside the BMP. I have a .NET Utf32String class as part of my MiscUtil library, should you ever want it. (It's not been very thoroughly tested, mind you.)
ASCII: Single byte encoding only using the bottom 7 bits. (Unicode code points 0-127.) No accents etc.
ANSI: There's no one fixed ANSI encoding - there are lots of them. Usually when people say "ANSI" they mean "the default locale/codepage for my system" which is obtained via Encoding.Default, and is often Windows-1252 but can be other locales.
There's more on my Unicode page and tips for debugging Unicode problems.
The other big resource of code is unicode.org which contains more information than you'll ever be able to work your way through - possibly the most useful bit is the code charts.
Some reading to get you started on character encodings: Joel on Software:
The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)
By the way - ASP.NET has nothing to do with it. Encodings are universal.
Related
I haven't found much (concise) info about when exactly to use Unicode. I understand that many say best practice is to always use Unicode. But Unicode strings DO have more memory footprint. Am I correct to say that Unicode must be used only when
Printing something to screen other than local (for example debugging) use.
Generally, sending any type of text across a network with the two ends being in different locales/country
When you're not sure which to use
I think it would be beneficial if someone explained the basics (concise) of what actually happens with Unicode... am I correct to say that things get messy when :
the physical (byte) string gets sent to a machine using a representation of strings (code page, others... this is already detail although interesting) different from the sender.
The context is using Unicode in a programming language (say C++), but I hope answers to this question can be used for any encoding situation.
Also, I'm aware Unicode and NLS are not the same thing, but is it correct to say that NLS implies usage of Unicode?
P.S. awesome site
Always use Unicode, it will save you and others a lot of pain.
What you may have confused is the issue of encoding. Unicode strings do not necessarily take more memory than the equivalent ASCII (or other encoding) strings, that depends a lot on the encoding used.
Sometimes "Unicode" is used as a synonym for "UCS-2" or "UTF-16". Strictly speaking that use is wrong, because "Unicode" is the standard that defines the set of characters and their unicode codepoints. It does not as such define a mapping to bytes (or words). UTF-16, UTF-8 and other encoding take over the job of mapping the characters to concrete bytes.
The beauty of Unicode is that it frees you from restrictions and lots of headaches. Unicode is the largest character set available to date, i.e. it enables you to actually encode and use virtually any character of any halfway mainstream language in use today. With any other character set you need to think about whether it can actually encode a character or not. Latin-1 cannot encode the character "あ", Shift-JIS cannot encode the character "ڥ" and so on. Only if you're very sure you will never ever need anything other than basic Latin/Arabic/Japanaese/whatever other subset of characters should you choose a specialized encoding such as Latin-1, BIG-5, Shift-JIS or ASCII.
Unicode is the most versatile charset available and therefore a good standard to adhere to.
The Unicode encodings are nothing special, they're just a little more complex in their bit representation since they have to encode many more characters while still trying to be space efficient. For a very detailed excursion into this topic, please see What Every Programmer Absolutely, Positively Needs To Know About Encodings And Character Sets To Work With Text.
I have a little utility which is sometimes helpful in seeing the difference between character encodings. http://sodved.awardspace.info/unicode.pl. If you paste in ö into the Raw (UTF-8) field you will see that it is represented by different byte sequences in different encodings. And as the other two good answers describe, some non-unicode encodings cannot represent it at all.
This question already has answers here:
What is the difference between UTF-8 and Unicode?
(18 answers)
Closed 6 years ago.
Consider:
Is it true that unicode=utf16?
Many are saying Unicode is a standard, not an encoding, but most editors support save as Unicode encoding actually.
As Rasmus states in his article "The difference between UTF-8 and Unicode?":
If asked the question, "What is the difference between UTF-8 and
Unicode?", would you confidently reply with a short and precise
answer? In these days of internationalization all developers should be
able to do that. I suspect many of us do not understand these concepts
as well as we should. If you feel you belong to this group, you should
read this ultra short introduction to character sets and encodings.
Actually, comparing UTF-8 and Unicode is like comparing apples and
oranges:
UTF-8 is an encoding - Unicode is a character
set
A character set is a list of characters with unique numbers (these
numbers are sometimes referred to as "code points"). For example, in
the Unicode character set, the number for A is 41.
An encoding on the other hand, is an algorithm that translates a
list of numbers to binary so it can be stored on disk. For example
UTF-8 would translate the number sequence 1, 2, 3, 4 like this:
00000001 00000010 00000011 00000100
Our data is now translated into binary and can now be saved to
disk.
All together now
Say an application reads the following from the disk:
1101000 1100101 1101100 1101100 1101111
The app knows this data represent a Unicode string encoded with
UTF-8 and must show this as text to the user. First step, is to
convert the binary data to numbers. The app uses the UTF-8 algorithm
to decode the data. In this case, the decoder returns this:
104 101 108 108 111
Since the app knows this is a Unicode string, it can assume each
number represents a character. We use the Unicode character set to
translate each number to a corresponding character. The resulting
string is "hello".
Conclusion
So when somebody asks you "What is the difference between UTF-8 and
Unicode?", you can now confidently answer short and precise:
UTF-8 (Unicode Transformation Format) and Unicode cannot be compared. UTF-8 is an encoding
used to translate numbers into binary data. Unicode is a character set
used to translate characters into numbers.
most editors support save as ‘Unicode’ encoding actually.
This is an unfortunate misnaming perpetrated by Windows.
Because Windows uses UTF-16LE encoding internally as the memory storage format for Unicode strings, it considers this to be the natural encoding of Unicode text. In the Windows world, there are ANSI strings (the system codepage on the current machine, subject to total unportability) and there are Unicode strings (stored internally as UTF-16LE).
This was all devised in the early days of Unicode, before we realised that UCS-2 wasn't enough, and before UTF-8 was invented. This is why Windows's support for UTF-8 is all-round poor.
This misguided naming scheme became part of the user interface. A text editor that uses Windows's encoding support to provide a range of encodings will automatically and inappropriately describe UTF-16LE as “Unicode”, and UTF-16BE, if provided, as “Unicode big-endian”.
(Other editors that do encodings themselves, like Notepad++, don't have this problem.)
If it makes you feel any better about it, ‘ANSI’ strings aren't based on any ANSI standard, either.
It's not that simple.
UTF-16 is a 16-bit, variable-width encoding. Simply calling something "Unicode" is ambiguous, since "Unicode" refers to an entire set of standards for character encoding. Unicode is not an encoding!
http://en.wikipedia.org/wiki/Unicode#Unicode_Transformation_Format_and_Universal_Character_Set
and of course, the obligatory Joel On Software - The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!) link.
There's a lot of misunderstanding being displayed here. Unicode isn't an encoding, but the Unicode standard is devoted primarily to encoding anyway.
ISO 10646 is the international character set you (probably) care about. It defines a mapping between a set of named characters (e.g., "Latin Capital Letter A" or "Greek small letter alpha") and a set of code points (a number assigned to each -- for example, 61 hexadecimal and 3B1 hexadecimal for those two respectively; for Unicode code points, the standard notation would be U+0061 and U+03B1).
At one time, Unicode defined its own character set, more or less as a competitor to ISO 10646. That was a 16-bit character set, but it was not UTF-16; it was known as UCS-2. It included a rather controversial technique to try to keep the number of necessary characters to a minimum (Han Unification -- basically treating Chinese, Japanese and Korean characters that were quite a bit alike as being the same character).
Since then, the Unicode consortium has tacitly admitted that that wasn't going to work, and now concentrate primarily on ways to encode the ISO 10646 character set. The primary methods are UTF-8, UTF-16 and UCS-4 (aka UTF-32). Those (except for UTF-8) also have LE (little endian) and BE (big-endian) variants.
By itself, "Unicode" could refer to almost any of the above (though we can probably eliminate the others that it shows explicitly, such as UTF-8). Unqualified use of "Unicode" probably happens the most often on Windows, where it will almost certainly refer to UTF-16. Early versions of Windows NT adopted Unicode when UCS-2 was current. After UCS-2 was declared obsolete (around Win2k, if memory serves), they switched to UTF-16, which is the most similar to UCS-2 (in fact, it's identical for characters in the "basic multilingual plane", which covers a lot, including all the characters for most Western European languages).
UTF-16 and UTF-8 are both encodings of Unicode. They are both Unicode; one is not more Unicode than the other.
Don't let an unfortunate historical artifact from Microsoft confuse you.
The development of Unicode was aimed
at creating a new standard for mapping
the characters in a great majority of
languages that are being used today,
along with other characters that are
not that essential but might be
necessary for creating the text. UTF-8
is only one of the many ways that you
can encode the files because there are
many ways you can encode the
characters inside a file into Unicode.
Source:
http://www.differencebetween.net/technology/difference-between-unicode-and-utf-8/
In addition to Trufa's comment, Unicode explicitly isn't UTF-16. When they were first looking into Unicode, it was speculated that a 16-bit integer might be enough to store any code, but in practice that turned out not to be the case. However, UTF-16 is another valid encoding of Unicode - alongside the 8-bit and 32-bit variants - and I believe is the encoding that Microsoft use in memory at runtime on the NT-derived operating systems.
Let's start from keeping in mind that data is stored as bytes; Unicode is a character set where characters are mapped to code points (unique integers), and we need something to translate these code points data into bytes. That's where UTF-8 comes in so called encoding – simple!
It's weird. Unicode is a standard, not an encoding. As it is possible to specify the endianness I guess it's effectively UTF-16 or maybe 32.
Where does this menu provide from?
It seems to me if UTF-8 was the only encoding used everywhere ever, there would be a lot less issues with code:
Don't even need to think about encoding issues.
No issues with mixed 1-2-byte character streaming, because everything uses 2 bytes.
Browsers don't need to wait for the <meta> tag specifying encoding before they can do anything. StackOverflow doesn't even have the meta tag, making browsers download the full page first, slowing page rendering.
You would never see ? and other random symbols on old web pages (e.g. in place of Microsoft Word's special [read: horrible] quotes).
More characters can be represented in UTF-8.
Other things I can't think of right now.
So why haven't the inferior encodings been nuked from space?
Don't even need to think about encoding issues.
True. Except for all the data that's still in the old ASCII format.
No issues with mixed 1-2-byte character streaming, because everything uses 2 bytes.
Incorrect. UTF-8 is variable length, from 1 to 6 or so bytes.
Browsers don't need to wait for the tag specifying encoding before they can do anything. StackOverflow doesn't even have the meta tag, making browsers download the full page first, slowing page rendering.
Browsers don't generally wait for the full page, they make a guess based on the first part of the page data.
You would never see ? and other random symbols on old web pages (e.g. in place of Microsoft Word's special [read: horrible] quotes).
Except for all those other old web pages that use other non-UTF-8 encodings (the non-English speaking world is pretty big).
More characters can be represented in UTF-8.
True. Your problems of data validation just got harder, too.
Why are EBCDIC, Baudot, and Morse still not nuked from orbit? Why did the buggy-whip manufacturers not close their doors the day after Gottlieb Daimler shipped his first automobile?
Relegating a technology to history takes non-zero time.
No issues with mixed 1-2-byte
character streaming, because
everything uses 2 bytes.
Not true at all. UTF-8 is a mixed-width 1, 2, 3, and 4-byte encoding. You may have been thinking of UTF-16, but even that has had 4-byte characters for a while. If you want a “simple” fixed-width encoding, you need UTF-32.
You would never see ? and other random
symbols on old web pages
Even with UTF-8 web pages, you still might not have a font that supports every Unicode character, so this is still a problem.
More characters can be represented in
UTF-8.
Sometimes this is a disadvantage. Having more characters means more bits are required to encode the characters. And to keep track of which ones are letters, digits, etc. And to store the fonts for displaying those characters. And to deal with additional Unicode-related complexities like normalization.
This is probably a non-issue for modern computers with gigabytes of RAM, but don't expect your TI-83 to support Unicode any time soon.
But still, if you do need those extra characters, it's way easier to work with UTF-8 than it is to work with than having zillions of different 8-bit character encodings (plus a few non-self-synchronizing East Asian multibyte encodings).
So why haven't the inferior encodings
been nuked from space?
In large part, this is because the “inferior” programming languages haven't been nuked from space. Lots of code is still written in languages like C and C++ (and even COBOL!) that predate Unicode and still don't have good support for it.
I badly wish we get rid of the situation where some libraries use char-based strings encoded in UTF-8 while others think char is for legacy encodings and Unicode should always use wchar_t and then you have to deal with whether wchar_t is UTF-16 or UTF-32 (or neither).
I don't think UTF-8 uses "2 bits" it's variable length. Also a lot of OS level code is UTF-16 and UTF-32 respectively, which means the choice is between ASCII or ISO-8859-1 for latin encodings.
Well, your question is a bit why-world-is-so-bad complaint. It is because it is so. The pages written in other encodings than UTF-8 come from the times when UTF-8 was badly supported by operating systems and when UTF-8 was not yet de-facto standard.
This pages will stay in their original encoding as long as someone will not change them, which is in many cases not very probable. Many of them are no longer supported by anyone.
There are also a lot of documents with non-unicode encoding in the internet, in many formats. Someone COULD convert them, but it, as above, requires a lot of effort.
So, the support for non-unicode must also stay.
And for the current times, keep as the rule that when someone uses non-unicode encoding, a kitten dies.
I have a text editor that can load ASCII and Unicode files. It automatically detects the encoding by looking for the BOM at the beginning of the file and/or searching the first 256 bytes for characters > 0x7f.
What other encodings should be supported, and what characteristics would make that encoding easy to auto-detect?
Definitely UTF-8. See http://www.joelonsoftware.com/articles/Unicode.html.
As far as I know, there's no guaranteed way to detect this automatically (although the probability of a mistaken diagnosis can be reduced to a very small amount by scanning).
I don't know about encodings, but make sure it can support the multiple different line ending standards! (\n vs \r\n)
If you haven't checked out Mich Kaplan's blog yet, I suggest doing so: http://blogs.msdn.com/michkap/
Specifically this article may be useful: http://www.siao2.com/2007/04/22/2239345.aspx
There is no way how you can detect an encoding. The best thing you could do is something like IE and depend on letter distributions in different languages, as well as standard characters for a language. But that's a long shot at best.
I would advise getting your hands on some large library of character sets (check out projects like iconv) and make all of those available to the user. But don't bother auto-detecting. Simply allow the user to select his preference of a default charset, which itself would be UTF-8 by default.
Latin-1 (ISO-8859-1) and its Windows extension CP-1252 must definitely be supported for western users. One could argue that UTF-8 is a superior choice, but people often don't have that choice. Chinese users would require GB-18030, and remember there are Japanese, Russians, Greeks too who all have there own encodings beside UTF-8-encoded Unicode.
As for detection, most encodings are not safely detectable. In some (like Latin-1), certain byte values are just invalid. In UTF-8, any byte value can occur, but not every sequence of byte values. In practice, however, you would not do the decoding yourself, but use an encoding/decoding library, try to decode and catch errors. So why not support all encodings that this library supports?
You could also develop heuristics, like decoding for a specific encoding and then test the result for strange characters or character combinations or frequency of such characters. But this would never be safe, and I agree with Vilx- that you shouldn't bother. In my experience, people normally know that a file has a certain encoding, or that only two or three are possible. So if they see you chose the wrong one, they can easily adapt. And have a look at other editors. The most clever solution is not always the best, especially if people are used to other programs.
UTF-16 is not very common in plain text files. UTF-8 is much more common because it is back compatible with ASCII and is specified in standards like XML.
1) Check for BOM of various Unicode encodings. If found, use that encoding.
2) If no BOM, check if file text is valid UTF-8, reading until you reach a sufficient non-ASCII sample (since many files are almost all ASCII but may have a few accented characters or smart quotes) or the file ends. If valid UTF-8, use UTF-8.
3) If not Unicode it's probably current platform default codepage.
4) Some encodings are easy to detect, for example Japanese Shift-JIS will have heavy use of the prefix bytes 0x82 and 0x83 indicating hiragana and katakana.
5) Give user option to change encoding if program's guess turns out to be wrong.
Whatever you do, use more than 256 bytes for a sniff test. It's important to get it right, so why not check the whole doc? Or at least the first 100KB or so.
Try UTF-8 and obvious UTF-16 (lots of alternating 0 bytes), then fall back to the ANSI codepage for the current locale.
Could anyone give me a concise definitions of
Unicode
UTF7
UTF8
UTF16
UTF32
Codepages
How they differ from Ascii/Ansi/Windows 1252
I'm not after wikipedia links or incredible detail, just some brief information on how and why the huge variations in Unicode have come about and why you should care as a programmer.
This is a good start: The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)
If you want a really brief introduction:
Unicode in 5 Minutes
Or if you are after one-liners:
Unicode: a mapping of characters to integers ("code points") in the range 0 through 1,114,111; covers pretty much all written languages in use
UTF7: an encoding of code points into a byte stream with the high bit clear; in general do not use
UTF8: an encoding of code points into a byte stream where each character may take one, two, three or four bytes to represent; should be your primary choice of encoding
UTF16: an encoding of code points into a word stream (16-bit units) where each character may take one or two words (two or four bytes) to represent
UTF32: an encoding of code points into a stream of 32-bit units where each character takes exactly one unit (four bytes); sometimes used for internal representation
Codepages: a system in DOS and Windows whereby characters are assigned to integers, and an associated encoding; each covers only a subset of languages. Note that these assignments are generally different than the Unicode assignments
ASCII: a very common assignment of characters to integers, and the direct encoding into bytes (all high bit clear); the assignment is a subset of Unicode, and the encoding a subset of UTF-8
ANSI: a standards body
Windows 1252: A commonly used codepage; it is similar to ISO-8859-1, or Latin-1, but not the same, and the two are often confused
Why do you care? Because without knowing the character set and encoding in use, you don't really know what characters a given byte stream represents. For example, the byte 0xDE could encode
Þ (LATIN CAPITAL LETTER THORN)
fi (LATIN SMALL LIGATURE FI)
ή (GREEK SMALL LETTER ETA WITH TONOS)
or 13 other characters, depending on the encoding and character set used.
As well as the oft-referenced Joel one, I have my own article which looks at it from a .NET-centric viewpoint, just for variety...
Yea I got some insight but it might be wrong, however it's helped me to understand it.
Let's just take some text. It's stored in the computers ram as a series of bytes, the codepage is simply the mapping table between the bytes and characters you and i read. So something like notepad comes along with its codepage and translates the bytes to your screen and you see a bunch of garbage, upside down question marks etc. This does not mean your data is garbled only that the application reading the bytes is not using the correct codepage. Some applications are smarter at detecting the correct codepage to use than others and some streams of bytes in memory contain a BOM which stands for a Byte Order Mark and this can declare the correct codepage to use.
UTF7, 8 16 etc are all just different codepages using different formats.
The same file stored as bytes using different codepages will be of a different filesize because the bytes are stored differently.
They also don't really differ from windows 1252 as that's just another codepage.
For a better smarter answer try one of the links.
Here, read this wonderful explanation from the Joel himself.
The Absolute Minimum Every Software Developer Absolutely, Positively Must Know About Unicode and Character Sets (No Excuses!)
Others have already pointed out good enough references to begin with. I'm not listing a true Dummy's guide, but rather some pointers from the Unicode Consortium page. You'll find some more nitty-gritty reasons for the usage of different encodings at the Unicode Consortium pages.
The Unicode FAQ is a good enough place to answer some (not all) of your queries.
A more succinct answer on why Unicode exists, is present in the Newcomer's section of the Unicode website itself:
Unicode provides a unique number for
every character, no matter what the
platform, no matter what the program,
no matter what the language.
As far as the technical reasons for usage of UTF-8, UTF-16 or UTF-32 are concerned, the answer lies in the Technical Introduction to Unicode:
UTF-8 is popular for HTML and similar
protocols. UTF-8 is a way of
transforming all Unicode characters
into a variable length encoding of
bytes. It has the advantages that the
Unicode characters corresponding to
the familiar ASCII set have the same
byte values as ASCII, and that Unicode
characters transformed into UTF-8 can
be used with much existing software
without extensive software rewrites.
UTF-16 is popular in many environments
that need to balance efficient access
to characters with economical use of
storage. It is reasonably compact and
all the heavily used characters fit
into a single 16-bit code unit, while
all other characters are accessible
via pairs of 16-bit code units.
UTF-32 is popular where memory space
is no concern, but fixed width, single
code unit access to characters is
desired. Each Unicode character is
encoded in a single 32-bit code unit
when using UTF-32.
All three encoding forms need at most
4 bytes (or 32-bits) of data for each
character.
A general thumb rule is to use UTF-8 when the predominant languages supported by your application are spoken west of the Indus river, UTF-16 for the opposite (east of the Indus), and UTF-32 when you are concerned about utilizing characters with uniform storage.
By the way UTF-7 is not a Unicode standard and was designed primarily for use in mail applications.
I'm not after wikipedia links or incredible detail, just some brief information on how and why the huge variations in Unicode have come about and why you should care as a programmer.
First of all, there aren't "variations of unicode". Unicode is a standard, the standard, to assign code points (integers) to characters. UTF8 is the most popular way to represent those integers as bytes!
Why should you care as a programmer?
It's fun to understand this!
If you don't have basic understanding of encodings, you can easily produce buggy code.
Example: You receive a ByteArray myByteArray from somewhere and you know it represents characters. You then run myByteArray.toString() and you get the string Hello. Your program works! One day after shiping your code your german customer calls: "We have a problem, äöü are not displayed correctly!". You start debugging the code, feeling pretty lost without a basic understanding of encodings. However, with the understanding of encodings you know that the error probably was this: When running myByteArray.toString(), your program assumed the string was encoded with the default system encoding. But maybe it wasn't! Maybe it was UTF8 and your system is LATIN-SOMETHING and so you should have ran myByteArray.toString("UTF8") instead!
Resources:
I would NOT recommend Joel's article as suggested by others. It's a long article with a lot of irrelevant information. I read it a couple of years back and the essence of it didn't stick to my brain since there are so many unimportant details.
As already mentioned http://wiki.secondlife.com/wiki/Unicode_In_5_Minutes is a great place to go for to grasp the essence of unicode.
If you want to actually understand variable length encodings like UTF8 I'd recommend https://www.tsmean.com/articles/encoding/unicode-and-utf-8-tutorial-for-dummies/.