I'm trying to copy a custom object from a RDC window into host (my local) machine. It fails.
Here's the code that i'm using to 1) copy and 2) paste:
1) Remote (client running on Windows XP accessed via RDC):
//copy entry
IDataObject ido = new DataObject();
XmlSerializer x = new XmlSerializer(typeof(EntryForClipboard));
StringWriter sw = new StringWriter();
x.Serialize(sw, new EntryForClipboard(entry));
ido.SetData(typeof(EntryForClipboard).FullName, sw.ToString());
Clipboard.SetDataObject(ido, true);
2) Local (client running on local Windows XP x64 workstation):
//paste entry
IDataObject ido = Clipboard.GetDataObject();
DataFormats.Format cdf = DataFormats.GetFormat(typeof(EntryForClipboard).FullName);
if (ido.GetDataPresent(cdf.Name)) //<- this always returns false
{
//can never get here!
XmlSerializer x = new XmlSerializer(typeof(EntryForClipboard));
string xml = (string)ido.GetData(cdf.Name);
StringReader sr = new StringReader(xml);
EntryForClipboard data = (EntryForClipboard)x.Deserialize(sr);
}
It works perfectly on the same machine though.
Any hints?
There are a couple of things you could look into:
Are you sure the serialization of the object truely converts it into XML? Perhaps the outputted XML have references to your memory space? Try looking at the text of the XML to see.
If you really have a serialized XML version of the object, why not store the value as plain-vanilla text and not using typeof(EntryForClipboard) ? Something like:
XmlSerializer x = new XmlSerializer(typeof(EntryForClipboard));
StringWriter sw = new StringWriter();
x.Serialize(sw, new EntryForClipboard(entry));
Clipboard.SetText(sw.ToString(), TextDataFormat.UnicodeText);
And then, all you'd have to do in the client-program is check if the text in the clipboard can be de-serialized back into your object.
Ok, found what the issue was.
Custom format names get truncated to 16 characters when copying over RDC using custom format.
In the line
ido.SetData(typeof(EntryForClipboard).FullName, sw.ToString());
the format name was quite long.
When i was receiving the copied data on the host machine the formats available had my custom format, but truncated to 16 characters.
IDataObject ido = Clipboard.GetDataObject();
ido.GetFormats(); //used to see available formats.
So i just used a shorter format name:
//to copy
ido.SetData("MyFormat", sw.ToString());
...
//to paste
DataFormats.Format cdf = DataFormats.GetFormat("MyFormat");
if (ido.GetDataPresent(cdf.Name)) {
//this not works
...
Related
I have a program which exports a System.Data.DataTable to an XLSX / OpenXml Spreadsheet. Finally have it mostly working. However when opening the Spreadsheet in Excel, Excel complains about the file being invalid, and needing repair, giving this message...
We found a problem with some content in . Do you want us to
try to recover as much as we can? If you trust the source of the
workbook, clik Yes.
If I click Yes, it comes back with this message...
Clicking the log file and opening that, just shows this...
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<recoveryLog xmlns="http://schemas.openxmlformats.org/spreadsheetml/2006/main">
<logFileName>error268360_01.xml</logFileName>
<summary>Errors were detected in file 'C:\Users\aabdi\AppData\Local\Temp\data.20190814.152538.xlsx'</summary>
<repairedRecords>
<repairedRecord>Repaired Records: Cell information from /xl/worksheets/sheet1.xml part</repairedRecord>
</repairedRecords>
</recoveryLog>
Obviously, we don't want to deploy this into a production environment like this. So I've been trying to figure out how to fix this. I threw together a quick little sample to validate the XML and show the errors, based on this link from MSDN. But when I run the program and load the exact same XLSX document that Excel complains about, the Validator comes back saying that the file is perfectly Valid. So I'm not sure where else to go from there.
Any better tools for trying to validate my XLSX XML? Following is the complete code I'm using to generate the XLSX file. (Yes, it's in VB.NET, it's a legacy app.)
If I comment out the line in the For Each dr As DataRow loop, then the XLSX file opens fine in Excel, (just without any data). So it's something with the individual cells, but I'm not really DOING much with them. Setting a value and data type, and that's it.
I also tried replacing the For Each loop in ConstructDataRow with the following, but it still outputs the same "bad" XML...
rv.Append(
(From dc In dr.Table.Columns
Select ConstructCell(
NVL(dr(dc.Ordinal), String.Empty),
MapSystemTypeToCellType(dc.DataType)
)
).ToArray()
)
Also tried replacing the call to Append with AppendChild for each cell too, but that didn't help either.
The zipped up XLSX file (erroring, with dummy data) is available here:
https://drive.google.com/open?id=1KVVWEqH7VHMxwbRA-Pn807SXHZ32oJWR
Full DataTable to Excel XLSX Code
#Region " ToExcel "
<Extension>
Public Function ToExcel(ByVal target As DataTable) As Attachment
Dim filename = Path.GetTempFileName()
Using doc As SpreadsheetDocument = SpreadsheetDocument.Create(filename, DocumentFormat.OpenXml.SpreadsheetDocumentType.Workbook)
Dim data = New SheetData()
Dim wbp = doc.AddWorkbookPart()
wbp.Workbook = New Workbook()
Dim wsp = wbp.AddNewPart(Of WorksheetPart)()
wsp.Worksheet = New Worksheet(data)
Dim sheets = wbp.Workbook.AppendChild(New Sheets())
Dim sheet = New Sheet() With {.Id = wbp.GetIdOfPart(wsp), .SheetId = 1, .Name = "Data"}
sheets.Append(sheet)
data.AppendChild(ConstructHeaderRow(target))
For Each dr As DataRow In target.Rows
data.AppendChild(ConstructDataRow(dr)) '// THIS LINE YIELDS THE BAD PARTS
Next
wbp.Workbook.Save()
End Using
Dim attachmentname As String = Path.Combine(Path.GetDirectoryName(filename), $"data.{Now.ToString("yyyyMMdd.HHmmss")}.xlsx")
File.Move(filename, attachmentname)
Return New Attachment(attachmentname, "application/vnd.openxmlformats-officedocument.spreadsheetml.sheet")
End Function
Private Function ConstructHeaderRow(dt As DataTable) As Row
Dim rv = New Row()
For Each dc As DataColumn In dt.Columns
rv.Append(ConstructCell(dc.ColumnName, CellValues.String))
Next
Return rv
End Function
Private Function ConstructDataRow(dr As DataRow) As Row
Dim rv = New Row()
For Each dc As DataColumn In dr.Table.Columns
rv.Append(ConstructCell(NVL(dr(dc.Ordinal), String.Empty), MapSystemTypeToCellType(dc.DataType)))
Next
Return rv
End Function
Private Function ConstructCell(value As String, datatype As CellValues) As Cell
Return New Cell() With {
.CellValue = New CellValue(value),
.DataType = datatype
}
End Function
Private Function MapSystemTypeToCellType(t As System.Type) As CellValues
Dim rv As CellValues
Select Case True
Case t Is GetType(String)
rv = CellValues.String
Case t Is GetType(Date)
rv = CellValues.Date
Case t Is GetType(Boolean)
rv = CellValues.Boolean
Case IsNumericType(t)
rv = CellValues.Number
Case Else
rv = CellValues.String
End Select
Return rv
End Function
#End Region
For anyone else coming in and finding this, I finally tracked this down to the Cell.DataType
Setting a value of CellValues.Date will cause Excel to want to "fix" the document.
(apparently for dates, the DataType should be NULL, and Date was only used in Office 2010).
Also, if you specify a DataType of CellValues.Boolean, then the CellValue needs to be either 0 or 1. "true" / "false" will also cause Excel to want to "fix" your spreadsheet.
Also, Microsoft has a better validator tool already built for download here:
https://www.microsoft.com/en-us/download/details.aspx?id=30425
We are trying to manipulate a word document to remove a paragraph based on certain conditions. But the word file produced always ends up being corrupted when we try to open it with the error:
Word found unreadable content
The below code corrupts the file but if we remove the line:
Document document = mdp.Document;
The the file is saved and opens without issue. Is there an obvious issue that I am missing?
var readAllBytes = File.ReadAllBytes(#"C:\Original.docx");
using (var stream = new MemoryStream(readAllBytes))
{
using (WordprocessingDocument wpd = WordprocessingDocument.Open(stream, true))
{
MainDocumentPart mdp = wpd.MainDocumentPart;
Document document = mdp.Document;
}
}
File.WriteAllBytes(#"C:\New.docx", readAllBytes);
UPDATE:
using (WordprocessingDocument wpd = WordprocessingDocument.Open(#"C:\Original.docx", true))
{
MainDocumentPart mdp = wpd.MainDocumentPart;
Document document = mdp.Document;
document.Save();
}
Running the code above on a physical file we can still open Original.docx without the error so it seems limited to modifying a stream.
Here's a method that reads a document into a MemoryStream:
public static MemoryStream ReadAllBytesToMemoryStream(string path)
{
byte[] buffer = File.ReadAllBytes(path);
var destStream = new MemoryStream(buffer.Length);
destStream.Write(buffer, 0, buffer.Length);
destStream.Seek(0, SeekOrigin.Begin);
return destStream;
}
Note how the MemoryStream is instantiated. I am passing the capacity rather than the buffer (as in your own code). Why is that?
When using MemoryStream() or MemoryStream(int), you are creating a resizable MemoryStream instance, which you will want in case you make changes to your document. When using MemoryStream(byte[]) (as in your code), the MemoryStream instance is not resizable, which will be problematic unless you don't make any changes to your document or your changes will only ever make it shrink in size.
Now, to read a Word document into a MemoryStream, manipulate that Word document in memory, and end up with a consistent MemoryStream, you will have to do the following:
// Get a MemoryStream.
// In this example, the MemoryStream is created by reading a file stored
// in the file system. Depending on the Stream you "receive", it makes
// sense to copy the Stream to a MemoryStream before processing.
MemoryStream stream = ReadAllBytesToMemoryStream(#"C:\Original.docx");
// Open the Word document on the MemoryStream.
using (WordprocessingDocument wpd = WordprocessingDocument.Open(stream, true)
{
MainDocumentPart mdp = wpd.MainDocumentPart;
Document document = mdp.Document;
// Manipulate document ...
}
// After having closed the WordprocessingDocument (by leaving the using statement),
// you can use the MemoryStream for whatever comes next, e.g., to write it to a
// file stored in the file system.
File.WriteAllBytes(#"C:\New.docx", stream.GetBuffer());
Note that you will have to reset the stream.Position property by calling stream.Seek(0, SeekOrigin.Begin) whenever your next action depends on that MemoryStream.Position property (e.g., CopyTo, CopyToAsync). Right after having left the using statement, the stream's position will be equal to its length.
I have a custom template in which I'd like to control (as best I can) the types of content that can exist in a document. To that end, I disable controls, and I also intercept pastes to remove some of those content types, e.g. charts. I am aware that this content can also be drag-and-dropped, so I also check for it later, but I'd prefer to stop or warn the user as soon as possible.
I have tried a few strategies:
RTF manipulation
Open XML manipulation
RTF manipulation is so far working fairly well, but I'd really prefer to use Open XML as I expect it to be more useful in the future. I just can't get it working.
Open XML Manipulation
The wonderfully-undocumented (as far as I can tell) "Embed Source" appears to contain a compound document object, which I can use to modify the copied content using the Open XML SDK. But I have been unable to put the modified content back into an object that lets it be pasted correctly.
The modification part seems to work fine. I can see, if I save the modified content to a temporary .docx file, that the changes are being made correctly. It's the return to the clipboard that seems to be giving me trouble.
I have tried assigning just the Embed Source object back to the clipboard (so that the other types such as RTF get wiped out), and in this case nothing at all gets pasted. I've also tried re-assigning the Embed Source object back to the clipboard's data object, so that the remaining data types are still there (but with mismatched content, probably), which results in an empty embedded document getting pasted.
Here's a sample of what I'm doing with Open XML:
using OpenMcdf;
using DocumentFormat.OpenXml;
using DocumentFormat.OpenXml.Packaging;
using DocumentFormat.OpenXml.Wordprocessing;
...
object dataObj = Forms.Clipboard.GetDataObject();
object embedSrcObj = dateObj.GetData("Embed Source");
if (embedSrcObj is Stream)
{
// read it with OpenMCDF
Stream stream = embedSrcObj as Stream;
CompoundFile cf = new CompoundFile(stream);
CFStream cfs = cf.RootStorage.GetStream("package");
byte[] bytes = cfs.GetData();
string savedDoc = Path.GetTempFileName() + ".docx";
File.WriteAllBytes(savedDoc, bytes);
// And then use the OpenXML SDK to read/edit the document:
using (WordprocessingDocument openDoc = WordprocessingDocument.Open(savedDoc, true))
{
OpenXmlElement body = openDoc.MainDocumentPart.RootElement.ChildElements[0];
foreach (OpenXmlElement ele in body.ChildElements)
{
if (ele is Paragraph)
{
Paragraph para = (Paragraph)ele;
if (para.ParagraphProperties != null && para.ParagraphProperties.ParagraphStyleId != null)
{
string styleName = para.ParagraphProperties.ParagraphStyleId.Val;
Run run = para.LastChild as Run; // I know I'm assuming things here but it's sufficient for a test case
run.RunProperties = new RunProperties();
run.RunProperties.AppendChild(new DocumentFormat.OpenXml.Wordprocessing.Text("test"));
}
}
// etc.
}
openDoc.MainDocumentPart.Document.Save(); // I think this is redundant in later versions than what I'm using
}
// repackage the document
bytes = File.ReadAllBytes(savedDoc);
cf.RootStorage.Delete("Package");
cfs = cf.RootStorage.AddStream("Package");
cfs.Append(bytes);
MemoryStream ms = new MemoryStream();
cf.Save(ms);
ms.Position = 0;
dataObj.SetData("Embed Source", ms);
// or,
// Clipboard.SetData("Embed Source", ms);
}
Question
What am I doing wrong? Is this just a bad/unworkable approach?
I need to sort some Russian text file and when I try to read the strings and print them out, they all appear garbled and like boxes. Looks like there is no Russian support for my eclipse. I downloaded Language packs plug in but I can't figure out how to install it.
Help required please.
FileInputStream fstream = new FileInputStream("c:\\textfile.txt");
// Get the object of DataInputStream
DataInputStream in = new DataInputStream(fstream);
BufferedReader br = new BufferedReader(new InputStreamReader(in));
String strLine;
ArrayList<String> allLines = new ArrayList<String>();
//Read File Line By Line
while ((strLine = br.readLine()) != null) {
allLines.add(strLine);
System.out.println(strLine);
}
How can you be sure it's an eclipse problem? It could be:
The encoding of the text file
The method you used to read the text file (eg: InputStreamReader uses default charset unless you explicitly specify it on the constructor)
The method you used to store the text file in memory
The method you used to print the text
The method you used to view the printed text
I am using the Fluent API to handle various configuration options for Logging using EntLib.
I am building up the loggingConfiguration section manually in code. It seems to work great except that the RollingFlatFileTraceListener doesn't actually Roll the file. It will respect the size limit and cap the amount of data it writes to the file appropriately, but it doesn't not actually create a new file and continue the logs.
I've tested it with a sample app and the app.config and it seems to work. So I'm guess that I am missing something although every config option that seems like it needs is there.
Here is the basics of the code (with hard-coded values to show a config that doesn't seem to be working):
//Create the config builder for the Fluent API
var configBuilder = new ConfigurationSourceBuilder();
//Start building the logging config section
var logginConfigurationSection = new LoggingSettings("loggingConfiguration", true, "General");
logginConfigurationSection.RevertImpersonation = false;
var _rollingFileListener = new RollingFlatFileTraceListenerData("Rolling Flat File Trace Listener", "C:\\tracelog.log", "----------------------", "",
10, "MM/dd/yyyy", RollFileExistsBehavior.Increment,
RollInterval.Day, TraceOptions.None,
"Text Formatter", SourceLevels.All);
_rollingFileListener.MaxArchivedFiles = 2;
//Add trace listener to current config
logginConfigurationSection.TraceListeners.Add(_rollingFileListener);
//Configure the category source section of config for flat file
var _rollingFileCategorySource = new TraceSourceData("General", SourceLevels.All);
//Must be named exactly the same as the flat file trace listener above.
_rollingFileCategorySource.TraceListeners.Add(new TraceListenerReferenceData("Rolling Flat File Trace Listener"));
//Add category source information to current config
logginConfigurationSection.TraceSources.Add(_rollingFileCategorySource);
//Add the loggingConfiguration section to the config.
configBuilder.AddSection("loggingConfiguration", logginConfigurationSection);
//Required code to update the EntLib Configuration with settings set above.
var configSource = new DictionaryConfigurationSource();
configBuilder.UpdateConfigurationWithReplace(configSource);
//Set the Enterprise Library Container for the inner workings of EntLib to use when logging
EnterpriseLibraryContainer.Current = EnterpriseLibraryContainer.CreateDefaultContainer(configSource);
Any help would be appreciated!
Your timestamp pattern is wrong. It should be yyy-mm-dd instead of MM/dd/yyyy. The ‘/’ character is not supported.
Also, you could accomplish your objective by using the fluent configuration interface much easier. Here's how:
ConfigurationSourceBuilder formatBuilder = new ConfigurationSourceBuilder();
ConfigurationSourceBuilder builder = new ConfigurationSourceBuilder();
builder.ConfigureLogging().LogToCategoryNamed("General").
SendTo.
RollingFile("Rolling Flat File Trace Listener")
.CleanUpArchivedFilesWhenMoreThan(2).WhenRollFileExists(RollFileExistsBehavior.Increment)
.WithTraceOptions(TraceOptions.None)
.RollEvery(RollInterval.Minute)
.RollAfterSize(10)
.UseTimeStampPattern("yyyy-MM-dd")
.ToFile("C:\\logs\\Trace.log")
.FormatWith(new FormatterBuilder().TextFormatterNamed("textFormatter"));
var configSource = new DictionaryConfigurationSource();
builder.UpdateConfigurationWithReplace(configSource);
EnterpriseLibraryContainer.Current = EnterpriseLibraryContainer.CreateDefaultContainer(configSource);
var writer = EnterpriseLibraryContainer.Current.GetInstance<LogWriter>();
DateTime stopWritingTime = DateTime.Now.AddMinutes(10);
while (DateTime.Now < stopWritingTime)
{
writer.Write("test", "General");
}