We have an application server running as a service, when some configuration is loaded it starts a bat script which has to run the powershell command Stop-ClusterGroup DRMSERVICES and then start it again.
The bat file works flawless when I manually execute it by dobbelt clicking. But when the service is running the bat, it does not finish, or execute the powershell command.
Bat file looks as follows
#echo off
powershell -command Stop-ClusterGroup DRMSERVICES
powershell -command Start-ClusterGroup DRMSERVICES
The service runs the bat file in silent mode, as a main difference.
I have tried with various switches including the -ExecutionPolicy Unrestricted and START /wait etc
Creating a seperate ps1 file and have the bat execute this instead.
All with the same output:
Manually executing the bat works
When the service executes the bat, it does not work.
I know the bat file is executed by the service, as inserting NET STOP servicename is working correct.
In the powershell event viewer I can also see event of the powershell commands take place.
The difference between manually executing and have the service execute the command in the event viewer, is event id 800 which states info about 'execution pipe' this is not present when the service is executing the bat.
The service does not wait for the powershell, and thus it does not have time to stop the cluster before exiting.
I'm lost whether this is a permission issue, syntax error or whatever.
Hopefully somebody can help
UPDATE:
I have tried with all proposed solutions, all with same result, the bat file works when double clicked, but the service does not execute the powershell command. Pure cmd is executed, as I can pipe to a txt file. I even got to a point when trying runas that the output log text wrote "insert administrator password"
I even managed to have our software guy change our software to call a powershell directly instead of a bat, same result. Powershell won't execute the command, this tells me it probably is permission, but everything have been set to log in as admin and run as admin for the sake of success, but still nothing.
I solved the problem.
Because the service is a 32bit process, it will execute a 32bit powershell.
FailoverClusters module only exists as a 64bit module.
By using %SystemRoot%\sysnative\WindowsPowershell\v1.0\powershell.exe
The service is able to open a 64bit session, and thus use the failover cluster module.
As a side note, the sysnative folder is only visible from a 32bit session, therefore it cannot be found via browsing in a 64bit os.
I think i have dealt with this kind of issue before, after the,
powershell -command Stop-ClusterGroup DRMSERVICES
you need to have cmd wait for a certain number of seconds, and then test if the DRMSERVICES is now stopped, if it is stopped then to start the DRMSERVICES again. This way cmd will keep waiting, and then check if the service has stopped.
After a certain number of tries, maybe have a way to stop checking and exit the script, for example it is trying to stop the service, and has run into a problem.
There is a timeout command in cmd
I have a .bat file that starts up a powershell script.
Within this powershell script, i startup PowerBI with a given database.
The powershell script waits till powerBI has been done starting up, and will then be exporting data to some datadump files.
Doing this manually works fine, and also when its on the task scheduler to run when user is logged on.
The moment i change this to "Run whether user is logged on or not" it doesnt work anymore.
The reason behind this, is that it seems that powershell is unable to start PowerBI and therefore there is no open data to query in the rest of the script.
So the positive side is it runs the bat and powershell just fine, only the powershell itself seems incapable to start powerBI.
Are there any solutions to this? should i for example use a different method to call the appliation to start?
currently the powershell snippit to start the app looks like this:
$PBIDesktop = "C:\Program Files\Microsoft Power BI Desktop\bin\PBIDesktop.exe"
$template = "C:\LiveData\Data.pbix"
$waitoPBD = 60
$app = START-PROCESS $PBIDesktop $template -PassThru
log_message "Waiting $($waitoPBD) seconds for PBI to launch"
Start-Sleep -s $waitoPBD
I faced similar issue. So, sharing my experience..
First of all, please verify couple of things.
Specify user account which will be used to invoke the job. Also, ensure that, the account have sufficient permission.
Don't forget to un-check the checkbox (as shown in screenshot) under Conditions Tab
Just found this one - sorry it took so long :D
But, i had this totally nervwrecking issue to.
Solution for me is to realize that the task scheduler is very deep part of the OS.
Thats why i have to grant access to the file, for the computername$ (system name) on the file or folder containing the file to run.
Rightclick on the file or folder -> Security. Select edit and add [Name of your computer]$ and give the read and execute permissions.
That's the only way I can make it run.
But i hope you found the solution in the meantime :)
I've managed to run the script from the command line thinking that i could possibly use windows Schedule Task to run it, but it doesn't run command prompt or anything. When i go and check the task it says it completed. Im running windows8. Any help would be appreciated.
You can make a .bat file to execute your sikuli sript. .bat files can be scheduled with Windows 8, but you may need to schedule that task as SYSTEM or as the admin.
I have a scheduled task on a Windows 2008 R2 server. The task includes a Start In directory entry. The task runs, and the batch file it runs does what it is supposed to do. When I run the batch file from a command prompt, I see no errors. The problem is that the "Last run result" is 0x1 (incorrect function call).
I did get this at one time with an incorrect DOS statement IF EXISTS file.txt DO (Copy file.txt file1.txt) that was corrected by dropping the DO statement. The current batch file does not show me any errors or warnings.
Why am I getting a 0x1 result?
Batch file that is run:
PUSHD \\JUKEBOX4\Archives\CallRecording
REM only move csv and wma together. wma should be created last.
IF NOT EXIST C:\CallRecording (MKDIR C:\CallRecording)
FOR /f %%f IN ('DIR /b *.wma') DO (
IF EXIST %%~nf.csv (MOVE /Y %%~nf.* C:\CallRecording\)
)
POPD
CD /D "C:\Program Files (x86)\Olim, LLC\Collybus DR Upload"
CollybusUpload.exe
POPD
Info on scheduled task setup:
Program to run: C:\Program Files (x86)\Olim, LLC\Collybus DR Upload\CallRecordingUploadFromH.cmd
Start in: C:\Program Files (x86)\Olim, LLC\Collybus DR Upload
Run whether user is logged on or not, highest privileges.
History screen, task completed entry
"Task Scheduler successfully completed task "\Call recording upload to portal from NH" , instance "{1449ad42-2210-427a-bd69-2c15e35340e6}" , action "C:\Windows\SYSTEM32\cmd.exe" with return code 1."
First screen of Task Scheduler shows "Run Result" of "Success"
It seems many users are having issues with this. Here are some fixes:
Right click on your task > "Properties" > "Actions" > "Edit" |
Put ONLY the file name under 'Program/Script', no quotes and ONLY the directory under 'Start in' as described, again no quotes.
Right click on your task > "Properties" > "General"
| Test with any/all of the following:
"Run with highest privileges" (test both options)
"Run wheter user is logged on or not" (test both options)
Check that "Configure for" is set to your machine's OS version
Make sure the user account running the program has the right permissions
I found that I have ticked "Run whether user is logged on or not" and it returns a silent failure.
When I changed tick "Run only when user is logged on" instead it works for me.
I've had the same problem. It is just a batch-file, working when manually started, but not working as a scheduled task.
there were drive-letters in the batch-file like this:
put z:\folder\file.ext
seems like you should not use drive-letters, they are bound to the user, who created them - for me this little change made it work again:
put \\server\folder\file.ext
For Powershell scripts
I have seen this problem multiple times while scheduling Powershell scripts with parameters on multiple Windows servers.
The solution has always been to use the -File parameter:
Under "Actions" --> "Program / Script" Type: "Powershell"
Under "Add arguments", instead of just typeing "C:/script/test.ps1" use -File "C:/script/test.ps1"
Happy scheduling!
Windows Task scheduler (Windows server 2008r2)
Same error for me (last run result: 0x1)
Tabs
Action: remove quotes/double-quotes in
program/script
and
start in
even if there is spaces in the path name...
General:
Run with highest privileges
and
configure for your OS...
Now it work!
last run result: The operation completed successfully
Probably not the cause of the OP's problem; for me the problem was caused by the fact that my program called a SQL function, and the service account the windows task was set up with did not have the required SQL permissions. That also gives a 0x1
This answer was originally edited into the question by the asker.
The problem was that the batch file WAS throwing a silent error. The final POPD was doing no work and was incorrectly called with no opening PUSHD.
Broken code:
CD /D "C:\Program Files (x86)\Olim, LLC\Collybus DR Upload" CALL CollybusUpload.exe POPD
Correct code:
PUSHD "C:\Program Files (x86)\Olim, LLC\Collybus DR Upload" CALL CollybusUpload.exe POPD
In my case it was an encoding issue. We wanted to start en existing batch file, and it resulted in "return code 1", and the desired action wasn't performed. I've accidentally found that the batch file was shown in Notepad as one with UTF-8 encoding (actually without any reason, as we have no special characters in the text). I saved it as ANSI, and it solved the problem for us. Might be, that it was a kind of encoding corruption in the file that prohibited Task Scheduler and cmd.exe to open the file, although it was displayed correctly in Notepad.
On our servers it was a problem with the system path. After upgrading PHP runtime (using installation directory whose name includes version number) and updating the path in system variable PATH we were getting status 0x1. System restart corrected the issue. Restarting Task Manager service might have done it, too.
I was running a PowerShell script into the task scheduller but i forgot to enable the execution-policy to unrestricted, in an elevated PowerShell console:
Set-ExecutionPolicy Unrestricted
After that, the error disappeared (0x1).
Just had the same problem here. In my case, the bat files had space " "
After getting rid of spaces from filename and change into underscore, bat file worked
sample before it wont start
"x:\Update & pull.bat"
after rename
"x:\Update_and_pull.bat"
For me the problem was the PowerShell script being ran had #Requires -RunAsAdministrator at the top, meaning it needs to run in an elevated command prompt as an Admin, but the user the Scheduled Task was set to run as wasn't an admin on the local computer. So even though Run with highest privileges was checked in the scheduled task, I still had to make the user an Administrator on the computer. Once I did that, the script ran as expected.
Since there is always more than one reason this could happen I thought I'd share some troubleshooting tips that helped me diagnose my issue.
Always adding a "start in" parameter first since thats an easy fix, even just adding the drive letter can help, e.g. C:\
If you're running "whether user is logged on or not" and it is failing it might be an issue with your user and/or user environment.
Switch the task to run only when user is logged in temporarily for
troubleshooting purposes.
Make sure you're actually logged in AS the user you're telling the task
to run as. (PATH and other environment variables are different by user
and if you see the task running on one user successfully that doesn't
necessarily mean it will run successfully for another user even if they're in the same security group.)
Add pauses or some other type of debugging to your script to give you
time to see any errors that may pop up.
Perform a manual run from the task scheduler window.
Fix any errors you see from your debugging statements. Rinse and repeat.
If it runs successfully switch back to run "whether user is logged on
or not" and try another manual run. If it works now you're all set.
If nothing has helped so far you might need to dig in deeper to your user and file privileges. My troubleshooting tips assume that you have been able to get a past task running using a specific user login already. They don't cover building a scheduled task from a fresh install necessarily. Luckily I haven't had to do that.
What solved it for me was that I was using a local administrator account instead of the domain account so I changed the "Run as" to the domain account.
It turns out that a FTP download call using winscp as last thing to do in the batch caused the problem. After inserting the echo command it works fine. Guess the problems source could be the winscp.exe which do not correctly report the end of the current task to the OS.
del "C:\_ftpcrawler\Account Export.csv" /S /Q
"C:\Program Files (x86)\WinSCP\WinSCP.exe" /console /script="C:\_isource\scripte\data.txt"
echo Download ausgeführt am %date%%time% >> C:\_isource\scripte\data.log
I have a startup task for my webrole that download some executable file from a blob and then proceed to the installation.
From a .cmd file, I start a power shell script that download the files, then I start the file from the .cmd.
The script works fine if I run it manually through RDP after the publishing is done.
But, when running as startup script, it sometimes (often) fail at different points.
The taskType is set to background.
Last time, the error was that the command PowerShell does not exists...
Also, I use powershell -command set-executionpolicy unrestricted before running my PS script, but I read here that other task may reset this setting and make mine fail.
Quite a mess.
So that makes me think that if I could wait for all other task to perform before starting mine, it would eliminate these kinds of problems
I suppose I could check if some process is running and wait for it to finish, but I have no clue wich process to check.
Or maybe there's another solution.
~edit~
I read here that the error about powershell not existing may be caused by the batch file being saved as UTF-8 in visual studio. I re-writed it from scratch in notepad++ and made sure it is save as ANSI. Then, same error. The full message is :
'PowerShell' is not recognized as an internal or external command,
operable program or batch file.
Again, the script run perfectly from command line in remote desktop.
It would be possible to set an environment variable at the end of the script that is required to finish, then in the script which is awaiting the dependencies, loop until the environment variable is set, then kick off its activities.
You could also run everything from a single powershell script and use the '-asjob' switch on your installer statement, use the 'wait-job' cmdlet to block until the task is complete then carry on. Powershell also offers a '?!' operator which ensures the last statement executed properly.
This might be caused by an encoding issue. As mentioned in this answer you should save your file in ASCII to ensure correct interpretation of your script.
From the linked answer:
Open your whatever.cmd file with your VS 2012 Ultimate. Click on File->Save whatever.cmd as -> on the dialog there is little arrow next to the [save] button. It will show up a menu that will have the option Save with Encoding.
Select it. Now choose "US-ASCII Codepage 20127" from the list of available encodings.