I'm trying to use sed to clean up lines of URLs to extract just the domain.
So from:
http://www.suepearson.co.uk/product/174/71/3816/
I want:
http://www.suepearson.co.uk/
(either with or without the trailing slash, it doesn't matter)
I have tried:
sed 's|\(http:\/\/.*?\/\).*|\1|'
and (escaping the non-greedy quantifier)
sed 's|\(http:\/\/.*\?\/\).*|\1|'
but I can not seem to get the non-greedy quantifier (?) to work, so it always ends up matching the whole string.
Neither basic nor extended Posix/GNU regex recognizes the non-greedy quantifier; you need a later regex. Fortunately, Perl regex for this context is pretty easy to get:
perl -pe 's|(http://.*?/).*|\1|'
In this specific case, you can get the job done without using a non-greedy regex.
Try this non-greedy regex [^/]* instead of .*?:
sed 's|\(http://[^/]*/\).*|\1|g'
With sed, I usually implement non-greedy search by searching for anything except the separator until the separator :
echo "http://www.suon.co.uk/product/1/7/3/" | sed -n 's;\(http://[^/]*\)/.*;\1;p'
Output:
http://www.suon.co.uk
this is:
don't output -n
search, match pattern, replace and print s/<pattern>/<replace>/p
use ; search command separator instead of / to make it easier to type so s;<pattern>;<replace>;p
remember match between brackets \( ... \), later accessible with \1,\2...
match http://
followed by anything in brackets [], [ab/] would mean either a or b or /
first ^ in [] means not, so followed by anything but the thing in the []
so [^/] means anything except / character
* is to repeat previous group so [^/]* means characters except /.
so far sed -n 's;\(http://[^/]*\) means search and remember http://followed by any characters except / and remember what you've found
we want to search untill the end of domain so stop on the next / so add another / at the end: sed -n 's;\(http://[^/]*\)/' but we want to match the rest of the line after the domain so add .*
now the match remembered in group 1 (\1) is the domain so replace matched line with stuff saved in group \1 and print: sed -n 's;\(http://[^/]*\)/.*;\1;p'
If you want to include backslash after the domain as well, then add one more backslash in the group to remember:
echo "http://www.suon.co.uk/product/1/7/3/" | sed -n 's;\(http://[^/]*/\).*;\1;p'
output:
http://www.suon.co.uk/
Simulating lazy (un-greedy) quantifier in sed
And all other regex flavors!
Finding first occurrence of an expression:
POSIX ERE (using -r option)
Regex:
(EXPRESSION).*|.
Sed:
sed -r 's/(EXPRESSION).*|./\1/g' # Global `g` modifier should be on
Example (finding first sequence of digits) Live demo:
$ sed -r 's/([0-9]+).*|./\1/g' <<< 'foo 12 bar 34'
12
How does it work?
This regex benefits from an alternation |. At each position engine tries to pick the longest match (this is a POSIX standard which is followed by couple of other engines as well) which means it goes with . until a match is found for ([0-9]+).*. But order is important too.
Since global flag is set, engine tries to continue matching character by character up to the end of input string or our target. As soon as the first and only capturing group of left side of alternation is matched (EXPRESSION) rest of line is consumed immediately as well .*. We now hold our value in the first capturing group.
POSIX BRE
Regex:
\(\(\(EXPRESSION\).*\)*.\)*
Sed:
sed 's/\(\(\(EXPRESSION\).*\)*.\)*/\3/'
Example (finding first sequence of digits):
$ sed 's/\(\(\([0-9]\{1,\}\).*\)*.\)*/\3/' <<< 'foo 12 bar 34'
12
This one is like ERE version but with no alternation involved. That's all. At each single position engine tries to match a digit.
If it is found, other following digits are consumed and captured and the rest of line is matched immediately otherwise since * means
more or zero it skips over second capturing group \(\([0-9]\{1,\}\).*\)* and arrives at a dot . to match a single character and this process continues.
Finding first occurrence of a delimited expression:
This approach will match the very first occurrence of a string that is delimited. We can call it a block of string.
sed 's/\(END-DELIMITER-EXPRESSION\).*/\1/; \
s/\(\(START-DELIMITER-EXPRESSION.*\)*.\)*/\1/g'
Input string:
foobar start block #1 end barfoo start block #2 end
-EDE: end
-SDE: start
$ sed 's/\(end\).*/\1/; s/\(\(start.*\)*.\)*/\1/g'
Output:
start block #1 end
First regex \(end\).* matches and captures first end delimiter end and substitues all match with recent captured characters which
is the end delimiter. At this stage our output is: foobar start block #1 end.
Then the result is passed to second regex \(\(start.*\)*.\)* that is same as POSIX BRE version above. It matches a single character
if start delimiter start is not matched otherwise it matches and captures the start delimiter and matches the rest of characters.
Directly answering your question
Using approach #2 (delimited expression) you should select two appropriate expressions:
EDE: [^:/]\/
SDE: http:
Usage:
$ sed 's/\([^:/]\/\).*/\1/g; s/\(\(http:.*\)*.\)*/\1/' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
Output:
http://www.suepearson.co.uk/
Note: this will not work with identical delimiters.
sed does not support "non greedy" operator.
You have to use "[]" operator to exclude "/" from match.
sed 's,\(http://[^/]*\)/.*,\1,'
P.S. there is no need to backslash "/".
sed - non greedy matching by Christoph Sieghart
The trick to get non greedy matching in sed is to match all characters excluding the one that terminates the match. I know, a no-brainer, but I wasted precious minutes on it and shell scripts should be, after all, quick and easy. So in case somebody else might need it:
Greedy matching
% echo "<b>foo</b>bar" | sed 's/<.*>//g'
bar
Non greedy matching
% echo "<b>foo</b>bar" | sed 's/<[^>]*>//g'
foobar
Non-greedy solution for more than a single character
This thread is really old but I assume people still needs it.
Lets say you want to kill everything till the very first occurrence of HELLO. You cannot say [^HELLO]...
So a nice solution involves two steps, assuming that you can spare a unique word that you are not expecting in the input, say top_sekrit.
In this case we can:
s/HELLO/top_sekrit/ #will only replace the very first occurrence
s/.*top_sekrit// #kill everything till end of the first HELLO
Of course, with a simpler input you could use a smaller word, or maybe even a single character.
HTH!
This can be done using cut:
echo "http://www.suepearson.co.uk/product/174/71/3816/" | cut -d'/' -f1-3
another way, not using regex, is to use fields/delimiter method eg
string="http://www.suepearson.co.uk/product/174/71/3816/"
echo $string | awk -F"/" '{print $1,$2,$3}' OFS="/"
sed certainly has its place but this not not one of them !
As Dee has pointed out: Just use cut. It is far simpler and much more safe in this case. Here's an example where we extract various components from the URL using Bash syntax:
url="http://www.suepearson.co.uk/product/174/71/3816/"
protocol=$(echo "$url" | cut -d':' -f1)
host=$(echo "$url" | cut -d'/' -f3)
urlhost=$(echo "$url" | cut -d'/' -f1-3)
urlpath=$(echo "$url" | cut -d'/' -f4-)
gives you:
protocol = "http"
host = "www.suepearson.co.uk"
urlhost = "http://www.suepearson.co.uk"
urlpath = "product/174/71/3816/"
As you can see this is a lot more flexible approach.
(all credit to Dee)
sed 's|(http:\/\/[^\/]+\/).*|\1|'
There is still hope to solve this using pure (GNU) sed. Despite this is not a generic solution in some cases you can use "loops" to eliminate all the unnecessary parts of the string like this:
sed -r -e ":loop" -e 's|(http://.+)/.*|\1|' -e "t loop"
-r: Use extended regex (for + and unescaped parenthesis)
":loop": Define a new label named "loop"
-e: add commands to sed
"t loop": Jump back to label "loop" if there was a successful substitution
The only problem here is it will also cut the last separator character ('/'), but if you really need it you can still simply put it back after the "loop" finished, just append this additional command at the end of the previous command line:
-e "s,$,/,"
sed -E interprets regular expressions as extended (modern) regular expressions
Update: -E on MacOS X, -r in GNU sed.
Because you specifically stated you're trying to use sed (instead of perl, cut, etc.), try grouping. This circumvents the non-greedy identifier potentially not being recognized. The first group is the protocol (i.e. 'http://', 'https://', 'tcp://', etc). The second group is the domain:
echo "http://www.suon.co.uk/product/1/7/3/" | sed "s|^\(.*//\)\([^/]*\).*$|\1\2|"
If you're not familiar with grouping, start here.
I realize this is an old entry, but someone may find it useful.
As the full domain name may not exceed a total length of 253 characters replace .* with .\{1, 255\}
This is how to robustly do non-greedy matching of multi-character strings using sed. Lets say you want to change every foo...bar to <foo...bar> so for example this input:
$ cat file
ABC foo DEF bar GHI foo KLM bar NOP foo QRS bar TUV
should become this output:
ABC <foo DEF bar> GHI <foo KLM bar> NOP <foo QRS bar> TUV
To do that you convert foo and bar to individual characters and then use the negation of those characters between them:
$ sed 's/#/#A/g; s/{/#B/g; s/}/#C/g; s/foo/{/g; s/bar/}/g; s/{[^{}]*}/<&>/g; s/}/bar/g; s/{/foo/g; s/#C/}/g; s/#B/{/g; s/#A/#/g' file
ABC <foo DEF bar> GHI <foo KLM bar> NOP <foo QRS bar> TUV
In the above:
s/#/#A/g; s/{/#B/g; s/}/#C/g is converting { and } to placeholder strings that cannot exist in the input so those chars then are available to convert foo and bar to.
s/foo/{/g; s/bar/}/g is converting foo and bar to { and } respectively
s/{[^{}]*}/<&>/g is performing the op we want - converting foo...bar to <foo...bar>
s/}/bar/g; s/{/foo/g is converting { and } back to foo and bar.
s/#C/}/g; s/#B/{/g; s/#A/#/g is converting the placeholder strings back to their original characters.
Note that the above does not rely on any particular string not being present in the input as it manufactures such strings in the first step, nor does it care which occurrence of any particular regexp you want to match since you can use {[^{}]*} as many times as necessary in the expression to isolate the actual match you want and/or with seds numeric match operator, e.g. to only replace the 2nd occurrence:
$ sed 's/#/#A/g; s/{/#B/g; s/}/#C/g; s/foo/{/g; s/bar/}/g; s/{[^{}]*}/<&>/2; s/}/bar/g; s/{/foo/g; s/#C/}/g; s/#B/{/g; s/#A/#/g' file
ABC foo DEF bar GHI <foo KLM bar> NOP foo QRS bar TUV
Have not yet seen this answer, so here's how you can do this with vi or vim:
vi -c '%s/\(http:\/\/.\{-}\/\).*/\1/ge | wq' file &>/dev/null
This runs the vi :%s substitution globally (the trailing g), refrains from raising an error if the pattern is not found (e), then saves the resulting changes to disk and quits. The &>/dev/null prevents the GUI from briefly flashing on screen, which can be annoying.
I like using vi sometimes for super complicated regexes, because (1) perl is dead dying, (2) vim has a very advanced regex engine, and (3) I'm already intimately familiar with vi regexes in my day-to-day usage editing documents.
Since PCRE is also tagged here, we could use GNU grep by using non-lazy match in regex .*? which will match first nearest match opposite of .*(which is really greedy and goes till last occurrence of match).
grep -oP '^http[s]?:\/\/.*?/' Input_file
Explanation: using grep's oP options here where -P is responsible for enabling PCRE regex here. In main program of grep mentioning regex which is matching starting http/https followed by :// till next occurrence of / since we have used .*? it will look for first / after (http/https://). It will print matched part only in line.
echo "/home/one/two/three/myfile.txt" | sed 's|\(.*\)/.*|\1|'
don bother, i got it on another forum :)
sed 's|\(http:\/\/www\.[a-z.0-9]*\/\).*|\1| works too
Here is something you can do with a two step approach and awk:
A=http://www.suepearson.co.uk/product/174/71/3816/
echo $A|awk '
{
var=gensub(///,"||",3,$0) ;
sub(/\|\|.*/,"",var);
print var
}'
Output:
http://www.suepearson.co.uk
Hope that helps!
Another sed version:
sed 's|/[:alnum:].*||' file.txt
It matches / followed by an alphanumeric character (so not another forward slash) as well as the rest of characters till the end of the line. Afterwards it replaces it with nothing (ie. deletes it.)
#Daniel H (concerning your comment on andcoz' answer, although long time ago): deleting trailing zeros works with
s,([[:digit:]]\.[[:digit:]]*[1-9])[0]*$,\1,g
it's about clearly defining the matching conditions ...
You should also think about the case where there is no matching delims. Do you want to output the line or not. My examples here do not output anything if there is no match.
You need prefix up to 3rd /, so select two times string of any length not containing / and following / and then string of any length not containing / and then match / following any string and then print selection. This idea works with any single char delims.
echo http://www.suepearson.co.uk/product/174/71/3816/ | \
sed -nr 's,(([^/]*/){2}[^/]*)/.*,\1,p'
Using sed commands you can do fast prefix dropping or delim selection, like:
echo 'aaa #cee: { "foo":" #cee: " }' | \
sed -r 't x;s/ #cee: /\n/;D;:x'
This is lot faster than eating char at a time.
Jump to label if successful match previously. Add \n at / before 1st delim. Remove up to first \n. If \n was added, jump to end and print.
If there is start and end delims, it is just easy to remove end delims until you reach the nth-2 element you want and then do D trick, remove after end delim, jump to delete if no match, remove before start delim and and print. This only works if start/end delims occur in pairs.
echo 'foobar start block #1 end barfoo start block #2 end bazfoo start block #3 end goo start block #4 end faa' | \
sed -r 't x;s/end//;s/end/\n/;D;:x;s/(end).*/\1/;T y;s/.*(start)/\1/;p;:y;d'
If you have access to gnu grep, then can utilize perl regex:
grep -Po '^https?://([^/]+)(?=)' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
http://www.suepearson.co.uk
Alternatively, to get everything after the domain use
grep -Po '^https?://([^/]+)\K.*' <<< 'http://www.suepearson.co.uk/product/174/71/3816/'
/product/174/71/3816/
The following solution works for matching / working with multiply present (chained; tandem; compound) HTML or other tags. For example, I wanted to edit HTML code to remove <span> tags, that appeared in tandem.
Issue: regular sed regex expressions greedily matched over all the tags from the first to the last.
Solution: non-greedy pattern matching (per discussions elsewhere in this thread; e.g. https://stackoverflow.com/a/46719361/1904943).
Example:
echo '<span>Will</span>This <span>remove</span>will <span>this.</span>remain.' | \
sed 's/<span>[^>]*>//g' ; echo
This will remain.
Explanation:
s/<span> : find <span>
[^>] : followed by anything that is not >
*> : until you find >
//g : replace any such strings present with nothing.
Addendum
I was trying to clean up URLs, but I was running into difficulty matching / excluding a word - href - using the approach above. I briefly looked at negative lookarounds (Regular expression to match a line that doesn't contain a word) but that approach seemed overly complex and did not provide a satisfactory solution.
I decided to replace href with ` (backtick), do the regex substitutions, then replace ` with href.
Example (formatted here for readability):
printf '\n
<a aaa h href="apple">apple</a>
<a bbb "c=ccc" href="banana">banana</a>
<a class="gtm-content-click"
data-vars-link-text="nope"
data-vars-click-url="https://blablabla"
data-vars-event-category="story"
data-vars-sub-category="story"
data-vars-item="in_content_link"
data-vars-link-text
href="https:example.com">Example.com</a>\n\n' |
sed 's/href/`/g ;
s/<a[^`]*`/\n<a href/g'
apple
banana
Example.com
Explanation: basically as above. Here,
s/href/` : replace href with ` (backtick)
s/<a : find start of URL
[^`] : followed by anything that is not ` (backtick)
*` : until you find a `
/<a href/g : replace each of those found with <a href
Unfortunately, as mentioned, this it is not supported in sed.
To overcome this, I suggest to use the next best thing(actually better even), to use vim sed-like capabilities.
define in .bash-profile
vimdo() { vim $2 --not-a-term -c "$1" -es +"w >> /dev/stdout" -cq! ; }
That will create headless vim to execute a command.
Now you can do for example:
echo $PATH | vimdo "%s_\c:[a-zA-Z0-9\\/]\{-}python[a-zA-Z0-9\\/]\{-}:__g" -
to filter out python in $PATH.
Use - to have input from pipe in vimdo.
While most of the syntax is the same. Vim features more advanced features, and using \{-} is standard for non-greedy match. see help regexp.
I have one file named `config_3_setConfigPW.ldif? containing the following line:
{pass}
on terminal, I used following commands
SLAPPASSWD=Pwd&0011
sed -i "s#{pass}#$SLAPPASSWD#" config_3_setConfigPW.ldif
It should replace {pass} to Pwd&0011 but it generates Pwd{pass}0011.
The reason is that the SLAPPASSWD shell variable is expanded before sed sees it. So sed sees:
sed -i "s#{pass}#Pwd&0011#" config_3_setConfigPW.ldif
When an "&" is on the right hand side of a pattern it means "copy the matched input", and in your case the matched input is "{pass}".
The real problem is that you would have to escape all the special characters that might arise in SLAPPASSWD, to prevent sed doing this. For example, if you had character "#" in the password, sed would think it was the end of the substitute command, and give a syntax error.
Because of this, I wouldn't use sed for this. You could try gawk or perl?
eg, this will print out the modified file in awk (though it still assumes that SLAPPASSWD contains no " character
awk -F \{pass\} ' { print $1"'${SLAPPASSWD}'"$2 } ' config_3_setConfigPW.ldif
That's because$SLAPPASSWD contains the character sequences & which is a metacharacter used by sed and evaluates to the matched text in the s command. Meaning:
sed 's/{pass}/match: &/' <<< '{pass}'
would give you:
match: {pass}
A time ago I've asked this question: "Is it possible to escape regex metacharacters reliably with sed". Answers there show how to reliably escape the password before using it as the replacement part:
pwd="Pwd&0011"
pwdEscaped="$(sed 's/[&/\]/\\&/g' <<< "$pwd")"
# Now you can safely pass $pwd to sed
sed -i "s/{pass}/$pwdEscaped/" config_3_setConfigPW.ldif
Bear in mind that sed NEVER operates on strings. The thing sed searches for is a regexp and the thing it replaces it with is string-like but has some metacharacters you need to be aware of, e.g. & or \<number>, and all of it needs to avoid using the sed delimiters, / typically.
If you want to operate on strings you need to use awk:
awk -v old="{pass}" -v new="$SLAPPASSWD" 's=index($0,old){ $0 = substr($0,1,s-1) new substr($0,s+length(old))} 1' file
Even the above would need tweaked if old or new contained escape characters.
I'm having issues matching strings even if they start with any number of white spaces. It's been very little time since I started using regular expressions, so I need some help
Here is an example. I have a file (file.txt) that contains two lines
#String1='Test One'
String1='Test Two'
Im trying to change the value for the second line, without affecting line 1 so I used this
sed -i "s|String1=.*$|String1='Test Three'|g"
This changes the values for both lines. How can I make sed change only the value of the second string?
Thank you
With gnu sed, you match spaces using \s, while other sed implementations usually work with the [[:space:]] character class. So, pick one of these:
sed 's/^\s*AWord/AnotherWord/'
sed 's/^[[:space:]]*AWord/AnotherWord/'
Since you're using -i, I assume GNU sed. Either way, you probably shouldn't retype your word, as that introduces the chance of a typo. I'd go with:
sed -i "s/^\(\s*String1=\).*/\1'New Value'/" file
Move the \s* outside of the parens if you don't want to preserve the leading whitespace.
There are a couple of solutions you could use to go about your problem
If you want to ignore lines that begin with a comment character such as '#' you could use something like this:
sed -i "/^\s*#/! s|String1=.*$|String1='Test Three'|g" file.txt
which will only operate on lines that do not match the regular expression /.../! that begins ^ with optional whiltespace\s* followed by an octothorp #
The other option is to include the characters before 'String' as part of the substitution. Doing it this way means you'll need to capture \(...\) the group to include it in the output with \1
sed -i "s|^\(\s*\)String1=.*$|\1String1='Test Four'|g" file.txt
With GNU sed, try:
sed -i "s|^\s*String1=.*$|String1='Test Three'|" file
or
sed -i "/^\s*String1=/s/=.*/='Test Three'/" file
Using awk you could do:
awk '/String1/ && f++ {$2="Test Three"}1' FS=\' OFS=\' file
#String1='Test One'
String1='Test Three'
It will ignore first hits of string1 since f is not true.
I am using the Unix sed command on a string that can contain all types of characters (&, |, !, /, ?, etc).
Is there a complex delimiter (with two characters?) that can fix the error:
sed: -e expression #1, char 22: unknown option to `s'
The characters in the input file are of no concern - sed parses them fine. There may be an issue, however, if you have most of the common characters in your pattern - or if your pattern may not be known beforehand.
At least on GNU sed, you can use a non-printable character that is highly improbable to exist in your pattern as a delimiter. For example, if your shell is Bash:
$ echo '|||' | sed s$'\001''|'$'\001''/'$'\001''g'
In this example, Bash replaces $'\001' with the character that has the octal value 001 - in ASCII it's the SOH character (start of heading).
Since such characters are control/non-printable characters, it's doubtful that they will exist in the pattern. Unless, that is, you are doing something weird like modifying binary files - or Unicode files without the proper locale settings.
Another way to do this is to use Shell Parameter Substitution.
${parameter/pattern/replace} # substitute replace for pattern once
or
${parameter//pattern/replace} # substitute replace for pattern everywhere
Here is a quite complex example that is difficult with sed:
$ parameter="Common sed delimiters: [sed-del]"
$ pattern="\[sed-del\]"
$ replace="[/_%:\\#]"
$ echo "${parameter//$pattern/replace}"
result is:
Common sed delimiters: [/_%:\#]
However: This only work with bash parameters and not files where sed excel.
There is no such option for multi-character expression delimiters in sed, but I doubt
you need that. The delimiter character should not occur in the pattern, but if it appears in the string being processed, it's not a problem. And unless you're doing something extremely weird, there will always be some character that doesn't appear in your search pattern that can serve as a delimiter.
You need the nested delimiter facility that Perl offers. That allows to use stuff like matching, substituting, and transliterating without worrying about the delimiter being included in your contents. Since perl is a superset of sed, you should be able to use it for whatever you’re used sed for.
Consider this:
$ perl -nle 'print if /something/' inputs
Now if your something contains a slash, you have a problem. The way to fix this is to change delimiter, preferably to a bracketing one. So for example, you could having anything you like in the $WHATEVER shell variable (provided the backets are balanced), which gets interpolated by the shell before Perl is even called here:
$ perl -nle "print if m($WHATEVER)" /usr/share/dict/words
That works even if you have correctly nested parens in $WHATEVER. The four bracketing pairs which correctly nest like this in Perl are < >, ( ), [ ], and { }. They allow arbitrary contents that include the delimiter if that delimiter is balanced.
If it is not balanced, then do not use a delimiter at all. If the pattern is in a Perl variable, you don’t need to use the match operator provided you use the =~ operator, so:
$whatever = "some arbitrary string ( / # [ etc";
if ($line =~ $whatever) { ... }
With the help of Jim Lewis, I finally did a test before using sed :
if [ `echo $1 | grep '|'` ]; then
grep ".*$1.*:" $DB_FILE | sed "s#^.*$1*.*\(:\)## "
else
grep ".*$1.*:" $DB_FILE | sed "s|^.*$1*.*\(:\)|| "
fi
Thanks for help
Wow. I totally did not know that you could use any character as a delimiter.
At least half the time I use the sed and BREs its on paths, code snippets, junk characters, things like that. I end up with a bunch of horribly unreadable escapes which I'm not even sure won't die on some combination I didn't think of. But if you can exclude just some character class (or just one character even)
echo '#01Y $#1+!' | sed -e 'sa$#1+ashita' -e 'su#01YuHolyug'
> > > Holy shit!
That's so much easier.
Escaping the delimiter inline for BASH to parse is cumbersome and difficult to read (although the delimiter does need escaping for sed's benefit when it's first used, per-expression).
To pull together thkala's answer and user4401178's comment:
DELIM=$(echo -en "\001");
sed -n "\\${DELIM}${STARTING_SEARCH_TERM}${DELIM},\\${DELIM}${ENDING_SEARCH_TERM}${DELIM}p" "${FILE}"
This example returns all results starting from ${STARTING_SEARCH_TERM} until ${ENDING_SEARCH_TERM} that don't match the SOH (start of heading) character with ASCII code 001.
There's no universal separator, but it can be escaped by a backslash for sed to not treat it like separator (at least unless you choose a backslash character as separator).
Depending on the actual application, it might be handy to just escape those characters in both pattern and replacement.
If you're in a bash environment, you can use bash substitution to escape sed separator, like this:
safe_replace () {
sed "s/${1//\//\\\/}/${2//\//\\\/}/g"
}
It's pretty self-explanatory, except for the bizarre part.
Explanation to that:
${1//\//\\\/}
${ - bash expansion starts
1 - first positional argument - the pattern
// - bash pattern substitution pattern separator "replace-all" variant
\/ - literal slash
/ - bash pattern substitution replacement separator
\\ - literal backslash
\/ - literal slash
} - bash expansion ends
example use:
$ input="ka/pus/ta"
$ pattern="/pus/"
$ replacement="/re/"
$ safe_replace "$pattern" "$replacement" <<< "$input"
ka/re/ta