Temp file has only the number 22.5 in it.
I use
sed 's/.//' Temp
and I expect 225 but get 2.5
Why?
The dot is a special character meaning "match any character".
$ sed s/\\.// temp
225
You would think that you could do sed s/\.// temp, but your shell will escape that single backslash and pass s/.// to sed.. So, you need to put two backslashes to pass a literal backslash to sed, which will properly treat \. as a literal dot. Or, you could quote the command to retain the literal backslash:
$ sed "s/\.//" temp
225
The reason you get 2.5 when you do s/.// is that the dot matches the first character in the file and removes it.
Because '.' is a regular expression that matches any character. You want 's/\.//'
. is a wildcard character for any character, so the first character is replaced by nothing, then sed is done.
You want sed 's/\.//' Temp. The backslash is used to escape special characters so that they regain their face value.
'.' is special: it matches any single character. So in your case, the sed expression matches the first character on the line. Try escaping it like this:
s/\.//
you can also use awk
awk '{sub(".","")}1' temp
Related
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file
I have a file and I want to append a specific text, \0A, to the end of each of its lines.
I used this command,
sed -i s/$/\0A/ file.txt
but that didn't work with backslash \0A.
In its default operations, sed cyclically appends a line from input, less it's terminating <newline>-character, into the pattern space of sed.
The OP wants to use sed to append the character \0A at the end of a line. This is the hexadecimal representation of the <newline>-character (cfr. http://www.asciitable.com/). So from this perspective, the OP attempts to double space a files. This can be easilly done using:
sed G file
The G command, appends a newline followed by the content of the hold space to the pattern space. Since the hold space is always empty, it just appends a newline character to the pattern space. The default action of sed is to print the line. So this just double-spaces a file.
Your command should be fixed by simply enclosing s/$/\0A/ in single quotes (') and escaping the backslash (with another backslash):
sed -i 's/$/\\0A/' file.txt
Notice that the surrounding 's protect that string from being processed by the shell, but the bashslash still needed escape in order to protect it from SED itself.
Obviously, it's still possible to avoid the single quotes if you escape enough:
sed -i s/$/\\\\0A/ file.txt
In this case there are no single quotes to protect the string, so we need write \\ in the shell to get SED fed with \, but we need two of those \\, i.e. \\\\, so that SED is fed with \\, which is an escaped \.
Move obviously, I'd never ever suggest the second alternative.
I am trying to understand what this below command does with -e in sed and exclamatory marks in the command,
sed -e "s!VPC_CIDR!"$(get_cluster_vpc_cidr)"!g" "templates/network-policies-${ns}.yaml"
This command helped to replace VPC_CIDR with 1.2.3.4\16.
Could someone through light on this please?
-e option just tells sed that the next argument is the script to execute. "s!VPC_CIDR!"$(get_cluster_vpc_cidr)"!g" is the script.
The " usage is strange. I would just "s!VPC_CIDR!$(get_cluster_vpc_cidr)!g". Because $(get_cluster_vpc_cidr) is not within " quotes, the result will undergo word splitting and filename expansion. Ie. it will fail on spaces and * or ? characters may work strangely.
The "s!VPC_CIDR!"$(get_cluster_vpc_cidr)"!g" is a sed script. The s command does, from man 1 sed:
s/regexp/replacement/
Attempt to match regexp against the pattern space. If successful, replace that portion matched with replacement. The replacement may con‐
tain the special character & to refer to that portion of the pattern space which matched, and the special escapes \1 through \9 to refer to
the corresponding matching sub-expressions in the regexp.
But you think - och ! is not /! But, as man 1 sed tells us This is just a brief synopsis of sed commands to serve as a reminder to those who already know sed. The POSIX sed or man 7 sed page will shed some more light:
[2addr]s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the pattern space. Any character other than <backslash> or <newline> can be used instead of a to delimit the BRE and the replacement. Within the BRE and the replacement, the BRE delimiter itself can be used as a literal character if it is preceded by a <backslash>.
Any character. You can evey pass byte 0x01, like sed $'s\x01BRE\x01replacement\x01' and it's a valid script.
So s!VPC_CIDR!$(get_cluster_vpc_cidr)!g command replaces every occurence (ie. the g global flag) of the VPC_CIDR string (the string is literal, there are no special regex expressions there) for the output of $(get_cluster_vpc_cidr) (except that & and \1 and such are interpreted specially in replacement part).
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file
I am using sed in a shell script to edit filesystem path names. Suppose I want to replace
/foo/bar
with
/baz/qux
However, sed's s/// command uses the forward slash / as the delimiter. If I do that, I see an error message emitted, like:
▶ sed 's//foo/bar//baz/qux//' FILE
sed: 1: "s//foo/bar//baz/qux//": bad flag in substitute command: 'b'
Similarly, sometimes I want to select line ranges, such as the lines between a pattern foo/bar and baz/qux. Again, I can't do this:
▶ sed '/foo/bar/,/baz/qux/d' FILE
sed: 1: "/foo/bar/,/baz/qux/d": undefined label 'ar/,/baz/qux/d'
What can I do?
You can use an alternative regex delimiter as a search pattern by backslashing it:
sed '\,some/path,d'
And just use it as is for the s command:
sed 's,some/path,other/path,'
You probably want to protect other metacharacters, though; this is a good place to use Perl and quotemeta, or equivalents in other scripting languages.
From man sed:
/regexp/
Match lines matching the regular expression regexp.
\cregexpc
Match lines matching the regular expression regexp. The c may be any character other than backslash or newline.
s/regular expression/replacement/flags
Substitute the replacement string for the first instance of the regular expression in the pattern space. Any character other than backslash or newline can be used instead of a slash to delimit the RE and the replacement. Within the RE and the replacement, the RE delimiter itself can be used as a literal character if it is preceded by a backslash.
Perhaps the closest to a standard, the POSIX/IEEE Open Group Base Specification says:
[2addr] s/BRE/replacement/flags
Substitute the replacement string for instances of the BRE in the
pattern space. Any character other than backslash or newline can
be used instead of a slash to delimit the BRE and the replacement.
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash."
When there is a slash / in theoriginal-string or the replacement-string, we need to escape it using \. The following command is work in ubuntu 16.04(sed 4.2.2).
sed 's/\/foo\/bar/\/baz\/qux/' file