How do device tokens vary from sandbox to production modes?
I think I have locked up some device tokens into a production mode, and they can't be pushed to from development.
Any ideas on how I can check?
When you build your app using a development cert, the app will generate a unique device token. This device token will not work on the production push network. When you then build your app with a distribution provisioning profile (App Store or Ad-Hoc) your device will generate a different device token for push notifications. If you try to send the development generated token to the production push SSL network, Apple's servers will reject your token.
What I did was to try production first, then if that failed with an InvalidToken code, then try it again against sandbox.
In case you're wondering, yes, this is harder than it needs to be.
Related
When I test the app using a TestFlight version built by the CI machine, the device receives push notifications.
But when I rebuild the app under Xcode locally with the debugger connected, the device doesn't receive any push notifications.
To validate things further I again tested locally with a push notifications tester, and the device indeed received a push notification.
So the code isn't omitted due to it being a #DEBUG build as the grant and registrations pass.
What is my local build possibly missing?
When you build your app in debug locally your app will generate a unique device token that doesn't receive production push notifications. When you build your app with a distribution provisioning profile it generates a different device token that does work on production.
Apple will reject a development device token unless you are specifically requesting a push notification using your APNS Sandbox certificate.
So if you haven't already you'll have to go through the certificate creation process all over again but this time for a sandbox certificate and use that one instead.
The solution ended up being that our server with the Houston gem needed to configure its APNS support to be in development mode, and not in production mode. 👍
I've enabled push notifications for my App ID and checked in development that is fine, but in production i am not getting notifications.
I used the following code in my server side.
Here are the steps I have followed when switching from production to development:
used the production SSL certificate key
changed the sandbox to false in above blog
I cross checked my distribution provisioning profile which contains key aps-environment and production mode
Is there any thing still I need to change, how can I cross check where I am going wrong?
I already downloaded my app from iTunes portal, but I did keep my .p12 file in my project while archiving, is it necessary?
Device tokens are different for development and production environment. Production device tokens are invalid in development environment and vica versa. You should have maintained different databased for the production tokens and development tokens. Now that you have them mixed it's a bit tricky to tell them apart.
You can find out which device token are invalid in the production environment (which means they are probably development tokens) by sending notifications for all your device tokens. After each send you should try to read an error response from Apple. Error response 8 means invalid device token. You should use a long timeout for that read (since it sometimes takes time to get the error response from Apple).
I am developing push notifications for an app of mine, I wrote the provider in PHP and it works fine. I was previously testing the push notifications with my dev builds and the sandbox server from Apple and everything worked fine, now I am trying to get it to work with an AdHoc build but I never receive any messages on the phone. Here is what I did:
Enable production push notifications for the App, create the certificate, download it, create the PEM following the instructions here and upload it to my server. Configured my PHP Script to use gateway.push.apple.com and port 2195 for the connection and test it, the connection to the server works as expected.
The Layout of the payload is the same as with the dev and writing to the stream works
After activating Production APN I recreated my AdHoc provisioning profile and verified after the build that in the entitlements aps-environment is set to "production" (which it is)
Installed the App through AdHoc on a device which has not run the app before, I get asked whether to allow PNs, click yes and my server receives the token just as it should.
Tried to send a message (which should get send to 3 devices) through the production environment. There is no error when connecting to Apple or sending the data but I do not receive a push notification on any of the devices.
I am really out of ideas what could be wrong, does anybody have an idea? Thanks a lot!
I finally figured this out, the issue is that if you open a connection to the APNS and send over more than one push notification AND one of the tokens you submit is not a token valid for this certificate (eg. you send over a token that belongs to a dev instance whilst being connected with the production certificate) the APNS cancels the delivery of all the PNs that you sent in this batch. At least that is what I experienced so far, so make sure you always keep your dev and production tokens nicely separated :)
Push certificates for production and development are different. And to make more difficult device tokens for production and sandbox are different for the same device. Cross check if these are correct and Im sure you must have faltered in this. To get device token in Production mode, write an alertview in AppDelegate didreceivenotifications event.
Once you get this token, you will know that it is different from dev token that we are generating which is why you were not able to send notification on PROD
I am struggling with the same issue. I believe the problem is that with adhoc builds, apple will only send notifications to them from the production apns server, try that.
For distribution and release build always use production certificate.
So we have a problem with our app. We put push-notification in, and it works flawlessly in development. Then, once we got on the app store push no longer works. By looking at our server logs it looks like the the registration call is failing and not getting a device token.
Has anyone encountered this before?
Cheers,
Did you create a production push notification SSL certificate? This is most frequently the cause. Applications signed with a development provisioning profile will not work with a production push SSL cert and applications signed with a distribution provisioning profile will not work with a development push cert.
Also, you can create an ad-hoc distribution cert and use this to test your distribution provisioning profile. Since you can't run the build you send to Apple for distribution, I'd strongly encourage you to make an ad-hoc distribution build and confirm that push notifications work in that installation.
previously i had configured my app id for development push notifications it was working fine.
But now i have changed my appid and i have followed the same procedure as stated in the apple docs and i have put newly generated .p12 file on the server side but i am not getting the push to my device now.
i have a doubt for an apple id i generate both development and production ssl certificates and in programme portal both environments shows green balls.
i have created development provision profile after doing as said above. in the sever side do i need to point to production ssl or development ssl for testing.
can anybody have any idea about this
It depends which server are you contacting.
If you are testing on the development side, you have to send requests to the sandbox (gateway.sandbox.push.apple.com) using the appropriate SSL certificate and the appropriated Device Token.
If you are on production/release mode, you have to use the correspondent info.
Another thing that you have to keep in mind is that, for each certificate you have to register your device for push notifications, and if you change the provisioning profile, you have to do everything again, because the Device Token will be different.
Cheers,
VFN
Make sure that the device which you are testing doesn't have both the development profile and the distribution profile. Only distribution (adhoc) profile must be there.