When I run Emacs command ispell-buffer on an Emacs buffer which is in the LaTeX mode, ispell checks spelling also inside math expressions.
I'd very much like to disable this. Is there an easy way to do it?
I've read about detex but detex does not seem to be integrated into Emacs.
It shouldn't do this, if you are using latexisms (eg. \[ ... \], equation environments, &c) to invoke math mode. Check the contents of ispell-tex-skip-alists; cf. section 6 of the ispell FAQ for what kind of thing should be there.
You can use $..$, $$..$$ to mark out maths using ispell-tex-skip-alists, but beware getting them out of kilter...
Postscript
Check also the value of the ispell-parser variable: this should be 'tex, otherwise ispell will not look for $...$ and $$...$$ regions.
Yes, you can: install aspell instead of ispell, and use flyspell with it.
This doesn't answer your question directly, but I have found Flyspell, an on-the-fly spell checker, incredibly useful when editing LaTeX documents. It still spellchecks inside equations, but it is much easier to ignore a few extra red underlines than ispell's interactive commands.
You may know this, but you can press A during spell checking to add a word to the buffer-local dictionary (that's capital A, lowercase a adds it to the global dictionary). It's not ideal, but this is how I usually suppress spell-checking of technical terms and variable names, etc., in my LaTeX documents.
This AUCTeX mailing list thread : "spell checker (ispell-buffer) complains about products in math modes" has some workarounds and the answer demonstrates how to use ispell-tex-skip-alists.
Another approach is to use ispell-skip-region-alist. The following example is to exclude org-mode src blocks:
(add-to-list 'ispell-skip-region-alist '("#\\+begin_src". "#\\+end_src"))
Related
When I use describe-function, I get the documentation text displayed in a Help buffer.
If the doc is long enough, it will wrap in the buffer, but it doesn't wrap nicely. like this:
I can make the docstring use 72-character lines, but that supposes that the window will be 80 characters, which is not always the case.
Is it possible to get describe-function to emit documentation in a more nicely formatted way?
Try enabling global-visual-line-mode to get nice text wrapping in all your buffers. It works in code and help buffers, but doesn't mess up your line numbering! Of all the line wrapping modes for emacs, I find it to be the best. If you don't want to use it globally, simply try M-x visual-line-mode.
No, please do not "try enabling global-visual-line-mode" as your solution for this.
Just try adopting the Emacs conventions for doc strings. See the Elisp manual, node Documentation Tips (aka "Tips for Documentation Strings").
In general, doc strings should not have lines wider than 60 chars.
Remember that there are multiple places where Emacs uses doc strings, including for apropos. Emacs expects doc strings to follow the documented conventions, for best results.
I am not a very good at using Emacs, but the feature I would like the most would be some integration with help/documentation for a particular language/API I use at the moment. I would imagine that there would be help displayed in another buffer depending on where I put my cursor while editing.
I wonder if there is a package that does that, even if it would be very simple, just displaying some file based on the keyword. I think there is, but I cannot find it ("help" is a too generic word).
(In particular, I would like to have this help for Common Lisp, but other languages, such as Java or C, could be useful.)
ILISP and SLIME provide several methods for looking up a function; see the Emacs wiki and the SLIME documentation. Or just built into Emacs itself, there are functions like C-h f to get function help or M-x man; both use the text at the point by default. You could pretty easily adapt them to work for another language of your choice.
Assuming you are using SLIME for common-lisp, you can take a look at slime-autodoc-mode.
Sorry, can't help with a generic solution for this.
You can set up the CLHS root for SLIME in your .emacs file:
(setq common-lisp-hyperspec-root "/usr/share/doc/hyperspec/HyperSpec/")
Adjust the path to where you put your HyperSpec.
Then, C-c C-d h with point at a symbol will look it up there in your browser.
One thing you might like to enable is eldoc-mode, by adding (turn-on-eldoc-mode) to your mode hook functions for the appropriate programming modes.
In ElDoc mode, the echo area displays information about a
function or variable in the text where point is. If point is
on a documented variable, it displays the first line of that
variable's doc string. Otherwise it displays the argument list
of the function called in the expression point is on.
This is probably less than you were after, but it still makes a good companion to a fuller-featured contextual help system, and there are a number of programming modes that support it.
There are several questions on SO about how to get code folding in emacs, without having to add any special characters like "markers" in the comments for example. Someone said that there was "no perfect solution."
It seems that it could be done by parsing the source of the program being written and look for matching parenthesis or bracket, or to do it based on indentation. You could also use a combination of scripts that use different methods.
So why is it commonly accepted that there is no "perfect" and straightforward way to get code-folding in emac? Is there something in emacs or its architecture that makes it hard to program? If it were easy, after so many years of smart people using emacs you would think that someone would have wrote it.
You should play with Hideshow (hs-minor-mode) combined with fold-dwim.el. It does exactly what you suggested -- looks for matching braces/parens, and can be set up to fall back on the indentation.
There's a robust folding solution out there for most common languages, and if there isn't, all the folding packages are highly customizable. In fact, the only downside is the proliferation of folding methods (fold-dwim helps quite a bit with that); I used to think that because nobody could point me to a definitive solution, folding was hard or impossible — in fact, the opposite is true. You just have to experiment a little to see what works best for you.
I have used folding.el (e.g. to group stuff in my .emacs), outline-minor-mode, and now Hideshow. There's some chance that none of them would work exactly the way you want right out of the box (e.g. you might need to set up an outline regex, or define folding marks for folding.el), but it turns out to be easy. The default keybindings can be somewhat baroque, but this is remedied by fold-dwim and/or hideshow-org (highly recommended for Hideshow, cf the Emacswiki hideshow page; you can also mimic hideshow-org's behavior for other folding modes with some quick-and-dirty elisp and fold-dwim). Once you figure out your preferred setup, just turn it on automatically via hooks or buffer-local variables, and watch your code fold away :)
You should look into CEDET. It does code-folding just fine, and many other fancy features that you're probably looking for if you're switching from an IDE to Emacs.
http://cedet.sourceforge.net/
Specifically, look for `global-semantic-tag-folding-mode'
You don't need anything extra, just enable outline-minor-mode for file types you want to fold.
But in fact, there ARE various solutions for Emacs; I have listed some of them (those I have happened to come across) at http://en.wikipedia.org/w/index.php?title=Code_folding&oldid=375300945#cite_note-2.
Though, there are things I'm missing: in some cases, I'd like to combine several mechanisms: for example, for markdown, I'd like to use outline-based folding (for sections) and indentation-based folding (for quotations, code blocks etc.) -- in order not bother with implementing a complete parser for markdown.
Here they are:
Token-based folding in Emacs
Token-based folding in Emacs is impemented by the folding minor mode.
Indentation-based folding in Emacs
One can use the set-selective-display function in Emacs to hide lines based on the indentation level, as suggested in the Universal code folding note.
Syntax-dependent folding in Emacs
Syntax-dependent folding in Emacs is supported by:
the outline and allout modes
for special dedicated "outline"-syntaxes;
by the hideshow minor mode for some programming languages;
also,
by the semantic-tag-folding minor mode and the
senator-fold-tag command for
syntaxes supported by semantic,
as well as by doc-mode for JavaDoc or Doxygen comments,
by
TeX-fold-mode
sgml-fold-element command,
nxml-outln library
in the corresponding language-specific modes, and possibly in other modes for particular syntaxes.
Several folding mechanisms are unified by the
fold-dwim interface.
See also http://www.emacswiki.org/emacs/CategoryHideStuff.
Folding of user-selected regions in Emacs
Folding of user-selected regions in Emacs is implemented by the hide-region-hide command.
I have been using folding-mode for quite some time. With auto-insert template and abrevs it works quite well for me for for some nice bricks of code.
Being able to produce the buffer folded (for printing/emailing) has always been a desire of mine. Some of my folding tags are for secure / password hiding.
I know this is a bit old but for me origami.el works perfectly well out of the box.
Yes Finally code folding is there in emacs. Try yafolding present at melpa.org package library.
I am switching to Emacs from TextMate. One feature of TextMate that I would really like to have in Emacs is the "Find in Project" search box that uses fuzzy matching. Emacs sort of has this with ido, but ido does not search recursively through child directories. It searches only within one directory.
Is there a way to give ido a root directory and to search everything under it?
Update:
The questions below pertain to find-file-in-project.el from Michał Marczyk's answer.
If anything in this message sounds obvious it's because I have used Emacs for less than one week. :-)
As I understand it, project-local-variables lets me define things in a .emacs-project file that I keep in my project root.
How do I point find-file-in-project to my project root?
I am not familiar with regex syntax in Emacs Lisp. The default value for ffip-regexp is:
".*\\.\\(rb\\|js\\|css\\|yml\\|yaml\\|rhtml\\|erb\\|html\\|el\\)"
I presume that I can just switch the extensions to the ones appropriate for my project.
Could you explain the ffip-find-options? From the file:
(defvar ffip-find-options
""
"Extra options to pass to `find' when using find-file-in-project.
Use this to exclude portions of your project: \"-not -regex \\".vendor.\\"\"")
What does this mean exactly and how do I use it to exclude files/directories?
Could you share an example .emacs-project file?
I use M-x rgrep for this. It automatically skips a lot of things you don't want, like .svn directories.
(Updated primarily in order to include actual setup instructions for use with the below mentioned find-file-in-project.el from the RINARI distribution. Original answer left intact; the new bits come after the second horizontal rule.)
Have a look at the TextMate page of the EmacsWiki. The most promising thing they mention is probably this Emacs Lisp script, which provides recursive search under a "project directory" guided by some variables. That file begins with an extensive comments section describing how to use it.
What makes it particularly promising is the following bit:
;; If `ido-mode' is enabled, the menu will use `ido-completing-read'
;; instead of `completing-read'.
Note I haven't used it myself... Though I may very well give it a try now that I've found it! :-)
HTH.
(BTW, that script is part of -- to quote the description from GitHub -- "Rinari Is Not A Rails IDE (it is an Emacs minor mode for Rails)". If you're doing any Rails development, you might want to check out the whole thing.)
Before proceeding any further, configure ido.el. Seriously, it's a must-have on its own and it will improve your experience with find-file-in-project. See this screencast by Stuart Halloway (which I've already mentioned in a comment on this answer) to learn why you need to use it. Also, Stu demonstrates how flexible ido is by emulating TextMate's project-scoped file-finding facility in his own way; if his function suits your needs, read no further.
Ok, so here's how to set up RINARI's find-file-in-project.el:
Obtain find-file-in-project.el and project-local-variables.el from the RINARI distribution and put someplace where Emacs can find them (which means in one of the directories in the load-path variable; you can use (add-to-list 'load-path "/path/to/some/directory") to add new directories to it).
Add (require 'find-file-in-project) to your .emacs file. Also add the following to have the C-x C-M-f sequence bring up the find-file-in-project prompt: (global-set-key (kbd "C-x C-M-f") 'find-file-in-project).
Create a file called .emacs-project in your projects root directory. At a minimum it should contain something like this: (setl ffip-regexp ".*\\.\\(clj\\|py\\)$"). This will make it so that only files whose names and in clj or py will be searched for; please adjust the regex to match your needs. (Note that this regular expression will be passed to the Unix find utility and should use find's preferred regular expression syntax. You still have to double every backslash in regexes as is usual in Emacs; whether you also have to put backslashes before parens / pipes (|) if you want to use their 'magic' regex meaning depends on your find's expectations. The example given above works for me on an Ubuntu box. Look up additional info on regexes in case of doubt.) (Note: this paragraph has been revised in the last edit to fix some confusion w.r.t. regular expression syntax.)
C-x C-M-f away.
There's a number of possible customisations; in particular, you can use (setl ffip-find-options "...") to pass additional options to the Unix find command, which is what find-file-in-project.el calls out to under the hood.
If things appear not to work, please check and double check your spelling -- I did something like (setl ffip-regex ...) once (note the lack of the final 'p' in the variable name) and were initially quite puzzled to discover that no files were being found.
Surprised nobody mentioned https://github.com/defunkt/textmate.el (now gotta make it work on Windows...)
eproject has eproject-grep, which does exactly what you want.
With the right project definition, it will only search project files; it will ignore version control, build artifacts, generated files, whatever. The only downside is that it requires a grep command on your system; this dependency will be eliminated soon.
You can get the effect you want by using GNU Global or IDUtils. They are not Emacs specific, but they has Emacs scripts that integrate that effect. (I don't know too much about them myself.)
You could also opt to use CEDET and the EDE project system. EDE is probably a bit heavy weight, but it has a way to just mark the top of a project. If you also keep GNU Global or IDUtils index files with your project, EDE can use it to find a file by name anywhere, or you can use `semantic-symref' to find references to symbols in your source files. CEDET is at http://cedet.sf.net
For pure, unadulterated speed, I highly recommend a combination of the command-line tool The Silver Searcher (a.k.a. 'ag') with ag.el. The ag-project interactive function will make an educated guess of your project root if you are using git, hg or svn and search the entire project.
FileCache may also be an option. However you would need to add your project directory manually with file-cache-add-directory-recursively.
See these links for info about how Icicles can help here:
find files anywhere, matching any parts of their name (including directory parts)
projects: create, organize, manage, search them
Icicles completion matching can be substring, regexp, fuzzy (various kinds), or combinations of these. You can also combine simple patterns, intersecting the matches or complementing (subtracting) a subset of them
I want to fully-justify latex code on EMACS so that my latex code will look better. For example, I remember my advisor sending me latex in fully justified way like this:
In ~\cite{Hummel2004}, authors described an approach for harvesting
software components from the Web. The basic idea is to use the Web as
the underlying repository, and to utilize standard search engines,
such as Google, as the means of discovering appropriate software
assets. Other researchers have crawled through Internet publicly
available CVS repositories to build their own source code search
engines (e.g., SPARS-J)~\cite{Matsushita2005}.
I suppose that his column-width is set to 70 columns.
Could someone give me a hint?
The standard fill.el package includes the command justify-current-line which is part of what you need. From the function help:
Do some kind of justification on this line.
Normally does full justification: adds spaces to the line to make it end at
the column given by `current-fill-column'.
Optional first argument how specifies alternate type of justification:
it can be `left', `right', `full', `center', or `none'.
If how is t, will justify however the `current-justification' function says to
And other posters have already given you the magicall invokation:
M-x set-justification
As a philosophical side note, the point of fixed-wdith text justification is to fake real typography on a inflexible output device. So applying it to LaTeX source seems a little odd to me. Moreover, I have been using the "one sentence to a line" approach to LaTeX documents for some months now, and find that it really does improves both the editability and the source-control behavior of LaTeX, so I would recommend against doing this.
If you select the region, and then press Ctrl-u M-x fill-region you get "full justification".
M-x set-justification-full
Use Refill mode afterwards to not have to run the command again after typing.
To get line wrap in the file itself (as opposed to something like longlines-mode that does not alter the structure of the file), I use auto-fill-mode, which automatically applies M-q (fill-paragraph) to each paragraph. For example, I use auto-fill-mode in mail-mode. You could do something similar with your LaTeX mode with a hook like this:
(add-hook 'TeX-mode-hook 'turn-on-auto-fill)
Assuming your TeX mode's hook is TeX-mode-hook.