I am not a very good at using Emacs, but the feature I would like the most would be some integration with help/documentation for a particular language/API I use at the moment. I would imagine that there would be help displayed in another buffer depending on where I put my cursor while editing.
I wonder if there is a package that does that, even if it would be very simple, just displaying some file based on the keyword. I think there is, but I cannot find it ("help" is a too generic word).
(In particular, I would like to have this help for Common Lisp, but other languages, such as Java or C, could be useful.)
ILISP and SLIME provide several methods for looking up a function; see the Emacs wiki and the SLIME documentation. Or just built into Emacs itself, there are functions like C-h f to get function help or M-x man; both use the text at the point by default. You could pretty easily adapt them to work for another language of your choice.
Assuming you are using SLIME for common-lisp, you can take a look at slime-autodoc-mode.
Sorry, can't help with a generic solution for this.
You can set up the CLHS root for SLIME in your .emacs file:
(setq common-lisp-hyperspec-root "/usr/share/doc/hyperspec/HyperSpec/")
Adjust the path to where you put your HyperSpec.
Then, C-c C-d h with point at a symbol will look it up there in your browser.
One thing you might like to enable is eldoc-mode, by adding (turn-on-eldoc-mode) to your mode hook functions for the appropriate programming modes.
In ElDoc mode, the echo area displays information about a
function or variable in the text where point is. If point is
on a documented variable, it displays the first line of that
variable's doc string. Otherwise it displays the argument list
of the function called in the expression point is on.
This is probably less than you were after, but it still makes a good companion to a fuller-featured contextual help system, and there are a number of programming modes that support it.
Related
as the title said, I am learning common lisp right now and using portacle, following Practical Common Lisp by Peter Seibel.
I found it quite annoying that the Slime-repl-sbcl buffer keep the writing at the end of the screen (using C-l or C-v doesn't help since once I try to execute an expression it will roll back to the end of the screen)
Is there anywhere to improve this? (should I just write on a text file and compile it? the only similar subject I found was about Cider repl and couldn't understand it, since I am still new to lisp)
Thank you for your time
I would like this fixed too. No solution yet. In slime-repl.el, I found:
scroll-conservatively (variable):
A value of zero means always recenter point if it moves off screen.
my test wasn't conclusive.
slime-display-output-buffer (function), which calls slime-repl-show-maximum-output, which role is to
Put the end of the buffer at the bottom of the window.
I rewrote slime-display-output-buffer without this call, but that wasn't conclusive either.
Maybe I tested badly.
(I'm making this answer a wiki)
You would indeed typically write in a source file, and compile each expression separately. Use the REPL only to test functions or do simple computations. To compile functions (or really, any toplevel expression), use C-c C-c - bound to slime-compile-defun by default - when the point (= your cursor) is inside the function's code. The REPL will then "know" of it, so you can test it there, but as it is now written in file, you can also modify it without having to copy/paste anything ! Just make sure to recompile functions that you modify !
If you want to compile/load entire files at once, look at the other compilation commands, e.g. slime-compile-and-load-file (see the SLIME manual, and its Compilation section)
For your problem: there is Emacs variable, named comint-scroll-to-bottom-on-input (or something along those lines, can't remember exactly ...) which enables the behaviour you are seeing, so that you don't have to scroll back to enter new expressions. It is possible that SLIME has another variable which configuring this behaviour for its REPL; in that case, it would probably be named almost the same, and you can set it to nil to disable it.
Finally, don't hesitate to look at the other tools provided by SLIME ! For example, it comes with an "inspector" (see the relevant section), that you can use instead of evaluating expressions such as *db* in the REPL. In that simple case, it makes no real difference, but if you start having - say - hash-tables or different structures/classes, it becomes an incredible tool for interactive development, to examine the internal of almost everything, redefine things directly from within the inspector without needing complex accessors, and so on.
I have found a code to make typing equations in LaTeX in a simpler and faster way. Instead of typing
\begin{equation}
\end{equation}
I can now type
\be
\ee
It works great and I am happy with it. The code, found in this document (p. 13), is
\makeatletter
\newcommand{\be}{\begingroup
\setlength{\arraycolsep}{2pt}
\eqnarray%
\#ifstar{\nonumber}{}%
}
\newcommand{\ee}{\endeqnarray\endgroup}
\makeatother
My problem is that I use emacs, and it doesn't recognise those math delimiters and hence it doesn't give the face the proper math colour. I have tried to customise this by using the command M-x customize-apropos to try and find something I could use, but the closest I got were the variables
'font-latex-math-environments',
which I don't think is what I am
after since from what I can see I
can only type the name of the
command which goes inside the curly
brackets in \begin{} and \end{}
'font-latex-make-built-in-keywords',
which would require more knowledge
from me than I have, and I don't
even know whether it would work.
What I would like to know, thus, is how to set up Emacs so that whenever I used the pair \be and \ee it would give the face the same colour as I set up for math. I imagine this would require an emacs lisp code, which would be great so I could modify it to include other things if so I wished.
Can anyone help me getting this done?
This is not really an answer to your question, but if it's just about saving keystrokes for writing an equation environment, you might want to try the following.
From the tags under your question, I assume you're using AUCTeX mode. With that, instead of typing
\begin{equation}
\end{equation}
every time, use the following shortcut to have AUCTeX insert an environment interactively: C-c C-e. This will prompt your for the name of the environment ("equation") which you can type using tab-completion.
So you do save a couple of keystrokes, the result is syntactically correct, you don't need the additional \be and \ee commands, and what's best is that this approach is generic, i.e., it works for all LaTeX environments, not just equation.
When learning a new programming language, "read source code" is a common advice received by the experts. However, with such a huge system like emacs, build over decades by many people, it is not so easy for the beginner to figure out which libraries are the best examples of idiomatic Elisp progamming. Therefore I would like to get some recommendations with regards to the following criteria:
idiomatic elisp programming style
adherence to emacs programming guidelines
clever use of the cl-package in accordance to emacs guidelines
clever use of eieio-package
exemplary organisation of a single .el file library
exemplary organisation of a multi-file/multi-package library
any criteria you consider important
Giving the reasons why you recommend certain libraries for auto-didactic studies would certainly be informative to beginners in Emacs lisp programming.
As Trey said, use the elisp from Emacs itself to learn. I usually do one of two things:
1) If I'm trying to find out how to use a specific function, I'll bring up a dired window and do:
% g foobar
where foobar is the name of the function I'm interested in learning how to use. That will mark all of the files that use foobar and then I go and search through them to see how to call it, in what context it's being called, etc.
2) If I'm trying to figure out how to do something, and I know a mode that does something similar, I'll go look at that mode's source code to see how they do it. If you don't know where to start, but you know how to execute what it is you want to do, a handy thing to do is to look it up by key-binding. For example, in a dired buffer, do the following:
C-h k % g
and that will bring up:
% g runs the command dired-mark-files-containing-regexp, which is an
% interactive compiled Lisp function in `dired.el'.
It is bound to % g, <menu-bar> <regexp> <mark-cont>.
(dired-mark-files-containing-regexp regexp &optional marker-char)
Mark all files with contents containing regexp for use in later
commands. A prefix argument means to unmark them instead.
`.' and `..' are never marked.
Clicking on dired.el in the above text (in an emacs buffer) will open up the source code and take you right to that function definition. It's a great way to learn by example.
Don't forget the elisp debugger as a way to see exactly what's going on and following along as the code executes step-by-step. You can mark the code for debugging using edebug-defun and then invoke it as usual, at which point emacs will step you through the code.
The source code I'd recommend would be that of Emacs itself. Start off with the simple stuff (pun intended), and look at other files as you are wont.
M-x find-library simple RET
I think it's self-explanatory as to why Emacs' own lisp code is a good example of Emacs lisp.
I want to fully-justify latex code on EMACS so that my latex code will look better. For example, I remember my advisor sending me latex in fully justified way like this:
In ~\cite{Hummel2004}, authors described an approach for harvesting
software components from the Web. The basic idea is to use the Web as
the underlying repository, and to utilize standard search engines,
such as Google, as the means of discovering appropriate software
assets. Other researchers have crawled through Internet publicly
available CVS repositories to build their own source code search
engines (e.g., SPARS-J)~\cite{Matsushita2005}.
I suppose that his column-width is set to 70 columns.
Could someone give me a hint?
The standard fill.el package includes the command justify-current-line which is part of what you need. From the function help:
Do some kind of justification on this line.
Normally does full justification: adds spaces to the line to make it end at
the column given by `current-fill-column'.
Optional first argument how specifies alternate type of justification:
it can be `left', `right', `full', `center', or `none'.
If how is t, will justify however the `current-justification' function says to
And other posters have already given you the magicall invokation:
M-x set-justification
As a philosophical side note, the point of fixed-wdith text justification is to fake real typography on a inflexible output device. So applying it to LaTeX source seems a little odd to me. Moreover, I have been using the "one sentence to a line" approach to LaTeX documents for some months now, and find that it really does improves both the editability and the source-control behavior of LaTeX, so I would recommend against doing this.
If you select the region, and then press Ctrl-u M-x fill-region you get "full justification".
M-x set-justification-full
Use Refill mode afterwards to not have to run the command again after typing.
To get line wrap in the file itself (as opposed to something like longlines-mode that does not alter the structure of the file), I use auto-fill-mode, which automatically applies M-q (fill-paragraph) to each paragraph. For example, I use auto-fill-mode in mail-mode. You could do something similar with your LaTeX mode with a hook like this:
(add-hook 'TeX-mode-hook 'turn-on-auto-fill)
Assuming your TeX mode's hook is TeX-mode-hook.
I have been using Emacs for more than three years now but it still takes me days to write even small functions in Lisp. I've looked through GNU Emacs Lisp Reference Manual but it's huge and structured completely opposite from JavaDoc, not from functions to descriptions but the other way around.
What will make my life much easier is some sort of small JavaDoc like document with most commonly used Emacs internal functions and they quick description.
(point) - returns current position in buffer
(save-excursion (p)) - saves current position in buffer before
executing (p) and restores it afterward.
Does anyone know where I can find something like that?
Have you tried the build-in manual in emacs? Open any lisp buffer (or any buffer in lisp mode), move your point to any function or variable, and hit C-h f (for function) or C-h v (for variable). Emacs will give you a fairly concise description of the function/variable.
For example, the manual content for (save-excursion) is
save-excursion is a special form in `C source code'.
(save-excursion &rest BODY)
Save point, mark, and current buffer; execute BODY; restore those things.
Executes BODY just like `progn'.
The values of point, mark and the current buffer are restored
even in case of abnormal exit (throw or error).
The state of activation of the mark is also restored.
This construct does not save `deactivate-mark', and therefore
functions that change the buffer will still cause deactivation
of the mark at the end of the command. To prevent that, bind
`deactivate-mark' with `let'.
The good thing also is the build-in manual give you "link" to to the source code of the function and to other functions that might be related, which make it nice to browse around.
Of course you can't learn lisp this way, but for looking up documentation of function this is a nice starter. When you find the build-in manual not understandable (which sometimes does happen), then it's time for you to google the function ;)
This site has some emacs lisp summary information that may be useful: http://xahlee.org/emacs/elisp.html.
In particularly, check out these links on that page: Basic Text-editing Functions, Emacs Lisp Idioms and Batch Text Processing
The GNU Introduction to emacs lisp is certainly more approachable than the reference manual.
I would add a couple of things:
M-x apropos - searches functions and variables for whatever string you specify (e.g. directory). Note that this is slightly different than C-h a, which only finds interactive functions
find a similar piece of code and copy it - you can learn an awful lot about how to do things by looking at what's already done. If you have a particular function you want to see examples of, one good way is to visit the main lisp source directory in dired (e.g. d:/product/emacs/lisp or /usr/share/lib/emacs/lisp) and do % g which will grep through all files looking for whatever string you type. Open up that file and see what other people have done with it.
C-h f and C-h v - as someone else mentioned, you can open up source, position point over a function or variable and then get documentation on it.
Check out the Emacs wiki, which has a crap-load of Emacs lisp modules for you to peruse.
I think you are taking the wrong approach. When learning a
programming language and set of libraries (collectively, "Emacs
Lisp"), you need to approach it on both the micro and macro scale.
Before you can start writing software, you need to know what tools you
have available. That is what the Emacs Lisp manual aims to educate
you on. You really need to sit down and read the whole thing. That
way you know what features Emacs provides.
After you do that, you need "micro-level" information. There are
a number of sources that provide this. If you have a general idea of
what you need to do ("working with buffers"), then the Lisp reference
is a good place to figure out what you need to know. If you know that
there's a function that does what you want, but don't quite remember
the name, then M-x apropos (C-u C-h a) will help you search the
documentation. If you know what function you want to use, but don't
remember quite how it works, then M-x describe-function (C-h f)
will sort that out for you.
So anyway, the key is to learn Emacs Lisp, and then let Emacs help you
with the details. A list of functions isn't going to teach you much.
(Oh, one more thing -- you should familiarize yourself with Common
Lisp. Most Emacs libraries use cl, which are the useful CL
functions implemented in Emacs Lisp. loop, destructuring-bind,
defun*, and so on are all there, and they are very helpful.)
Good suggestions from others -- Emacs help system is your friend.
In addition:
http://www.emacswiki.org/emacs/EmacsNewbieWithIcicles
http://www.emacswiki.org/emacs/Icicles_-_Progressive_Completion
http://www.emacswiki.org/emacs/Icicles_-_Nutshell_View#ChippingAway
In order to understand what's on, quite often it's useful having a look at the source code.
http://repo.or.cz/w/elbb.git/blob/HEAD:/code/Go-to-Emacs-Lisp-Definition.el
Have you tryed <f1> f ? It is bound to describe-function. Example with point:
point is a built-in function in C source code.
(point)
Return value of point, as an integer.
Beginning of buffer is position (point-min).
[back]
Like most Lisp systeme, Emacs has an integrated documentation tool!
Any Lisp function or variable can declare an optional doc string.
Almost all standard command or function do declare a usefull doc string.
Emacs (like most Lisp systems) allows you to display the doc string of any function or variable (<f1> f and <f1> v) at any time.
When displayed, the doc string is browsable, meaning that you can click on symbols to see their doc string, or go to the source of the corresponding function or variable.
As soon as you evaluate any defun or defvar, its doc string is available through describe-function or describe-variable: this doc is alive!
M-x find-library RET <library name> is all you really need
If you're willing to fork over money for a dead tree, I'd recommend
(source: oreilly.com)
In XEmacs, and I believe in Emacs as well,
pressing C-h f, then the tab key for tab completion, which at that point is all functions, will give you a list of functions the editor knows about.
You just use cursor keys and scroll to one you want to know about and press enter to see details.
If a list of functions, with further info available, is what you want, that will give it to you.
This list is all currently available functions, so if you have packages of lisp installed, it shows the functions those packages supply as well as native functions. In my copy of XEmacs, today, I have 6,586 functions in the list. Emacs will be similar.
The problem is that not all functions have names that make them context-meaningful (ie not all menu variables/functions have the word menu in them, so you will miss some things if you go by names only.
You can use the INFO pages (on the menu) to view them more topically arranged, and get to the same usage information.
Download source code for Emacs. Go to src/ folder and type:
grep -r DEFUN *
You will get list of all primitive Lisp functions of Emacs.