Can anyone tell me how to get the Unicode name of a character in MFC.
e.g. -
Character - Name
Z - LATIN CAPITAL LETTER Z
[ - LEFT SQUARE BRACKET
etc.
Thanks,
Dev
As far as I know, this is not possible (unless you hack charmap.exe). I solved the problem by adding a text-file resource to my application, containing all these names. You can download my file from http://privat.rejbrand.se/NamesListParsed.txt.
Related
I've seen weirdly formatted text called Zalgo like below written on various forums. It's kind of annoying to look at, but it really bothers me because it undermines my notion of what a character is supposed to be. My understanding is that a character is supposed to move horizontally across a line and stay within a certain "container". Obviously the Zalgo text is moving vertically and doesn't seem to be restricted to any space.
Is this a bug/flaw/exploit/hack in Unicode? Are these individual characters with weird properties? "What" is happening here?
H̡̫̤̤̣͉̤ͭ̓̓̇͗̎̀ơ̯̗̱̘̮͒̄̀̈ͤ̀͡w͓̲͙͖̥͉̹͋ͬ̊ͦ̂̀̚ ͎͉͖̌ͯͅͅd̳̘̿̃̔̏ͣ͂̉̕ŏ̖̙͋ͤ̊͗̓͟͜e͈͕̯̮̙̣͓͌ͭ̍̐̃͒s͙͔̺͇̗̱̿̊̇͞ ̸̤͓̞̱̫ͩͩ͑̋̀ͮͥͦ̊Z̆̊͊҉҉̠̱̦̩͕ą̟̹͈̺̹̋̅ͯĺ̡̘̹̻̩̩͋͘g̪͚͗ͬ͒o̢̖͇̬͍͇͓̔͋͊̓ ̢͈͙͂ͣ̏̿͐͂ͯ͠t̛͓̖̻̲ͤ̈ͣ͝e͋̄ͬ̽͜҉͚̭͇ͅx͎̬̠͇̌ͤ̓̂̓͐͐́͋͡ț̗̹̝̄̌̀ͧͩ̕͢ ̮̗̩̳̱̾w͎̭̤͍͇̰̄͗ͭ̃͗ͮ̐o̢̯̻̰̼͕̾ͣͬ̽̔̍͟ͅr̢̪͙͍̠̀ͅǩ̵̶̗̮̮ͪ́?̙͉̥̬͙̟̮͕ͤ̌͗ͩ̕͡
The text uses combining characters, also known as combining marks. See section 2.11 of Combining Characters in the Unicode Standard (PDF).
In Unicode, character rendering does not use a simple character cell model where each glyph fits into a box with given height. Combining marks may be rendered above, below, or inside a base character
So you can easily construct a character sequence, consisting of a base character and “combining above” marks, of any length, to reach any desired visual height, assuming that the rendering software conforms to the Unicode rendering model. Such a sequence has no meaning of course, and even a monkey could produce it (e.g., given a keyboard with suitable driver).
And you can mix “combining above” and “combining below” marks.
The sample text in the question starts with:
LATIN CAPITAL LETTER H - H
COMBINING LATIN SMALL LETTER T - ͭ
COMBINING GREEK KORONIS - ̓
COMBINING COMMA ABOVE - ̓
COMBINING DOT ABOVE - ̇
Zalgo text works because of combining characters. These are special characters that allow to modify character that comes before.
OR
y + ̆ = y̆ which actually is
y + ̆ = y̆
Since you can stack them one atop the other you can produce the following:
y̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
which actually is:
y̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
The same goes for putting stuff underneath:
y̰̰̰̰̰̰̰̰̰̰̰̰̰̰̰̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
that in fact is:
y̰̰̰̰̰̰̰̰̰̰̰̰̰̰̰̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
In Unicode, the main block of combining diacritics for European languages and the International Phonetic Alphabet is U+0300–U+036F.
More about it here
To produce a list of combining diacritical marks you can use the following script (since links keep on dying)
for(var i=768; i<879; i++){console.log(new DOMParser().parseFromString("&#"+i+";", "text/html").documentElement.textContent +" "+"&#"+i+";");}
Also check em out
Mͣͭͣ̾ Vͣͥͭ͛ͤͮͥͨͥͧ̾
I've seen weirdly formatted text called Zalgo like below written on various forums. It's kind of annoying to look at, but it really bothers me because it undermines my notion of what a character is supposed to be. My understanding is that a character is supposed to move horizontally across a line and stay within a certain "container". Obviously the Zalgo text is moving vertically and doesn't seem to be restricted to any space.
Is this a bug/flaw/exploit/hack in Unicode? Are these individual characters with weird properties? "What" is happening here?
H̡̫̤̤̣͉̤ͭ̓̓̇͗̎̀ơ̯̗̱̘̮͒̄̀̈ͤ̀͡w͓̲͙͖̥͉̹͋ͬ̊ͦ̂̀̚ ͎͉͖̌ͯͅͅd̳̘̿̃̔̏ͣ͂̉̕ŏ̖̙͋ͤ̊͗̓͟͜e͈͕̯̮̙̣͓͌ͭ̍̐̃͒s͙͔̺͇̗̱̿̊̇͞ ̸̤͓̞̱̫ͩͩ͑̋̀ͮͥͦ̊Z̆̊͊҉҉̠̱̦̩͕ą̟̹͈̺̹̋̅ͯĺ̡̘̹̻̩̩͋͘g̪͚͗ͬ͒o̢̖͇̬͍͇͓̔͋͊̓ ̢͈͙͂ͣ̏̿͐͂ͯ͠t̛͓̖̻̲ͤ̈ͣ͝e͋̄ͬ̽͜҉͚̭͇ͅx͎̬̠͇̌ͤ̓̂̓͐͐́͋͡ț̗̹̝̄̌̀ͧͩ̕͢ ̮̗̩̳̱̾w͎̭̤͍͇̰̄͗ͭ̃͗ͮ̐o̢̯̻̰̼͕̾ͣͬ̽̔̍͟ͅr̢̪͙͍̠̀ͅǩ̵̶̗̮̮ͪ́?̙͉̥̬͙̟̮͕ͤ̌͗ͩ̕͡
The text uses combining characters, also known as combining marks. See section 2.11 of Combining Characters in the Unicode Standard (PDF).
In Unicode, character rendering does not use a simple character cell model where each glyph fits into a box with given height. Combining marks may be rendered above, below, or inside a base character
So you can easily construct a character sequence, consisting of a base character and “combining above” marks, of any length, to reach any desired visual height, assuming that the rendering software conforms to the Unicode rendering model. Such a sequence has no meaning of course, and even a monkey could produce it (e.g., given a keyboard with suitable driver).
And you can mix “combining above” and “combining below” marks.
The sample text in the question starts with:
LATIN CAPITAL LETTER H - H
COMBINING LATIN SMALL LETTER T - ͭ
COMBINING GREEK KORONIS - ̓
COMBINING COMMA ABOVE - ̓
COMBINING DOT ABOVE - ̇
Zalgo text works because of combining characters. These are special characters that allow to modify character that comes before.
OR
y + ̆ = y̆ which actually is
y + ̆ = y̆
Since you can stack them one atop the other you can produce the following:
y̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
which actually is:
y̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
The same goes for putting stuff underneath:
y̰̰̰̰̰̰̰̰̰̰̰̰̰̰̰̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
that in fact is:
y̰̰̰̰̰̰̰̰̰̰̰̰̰̰̰̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆̆
In Unicode, the main block of combining diacritics for European languages and the International Phonetic Alphabet is U+0300–U+036F.
More about it here
To produce a list of combining diacritical marks you can use the following script (since links keep on dying)
for(var i=768; i<879; i++){console.log(new DOMParser().parseFromString("&#"+i+";", "text/html").documentElement.textContent +" "+"&#"+i+";");}
Also check em out
Mͣͭͣ̾ Vͣͥͭ͛ͤͮͥͨͥͧ̾
If you already know the name of the codepoint, such as GREEK SMALL LETTER PHI, you can obtain the character using \c. There is an equivalent NQP in getunicode. However, is there a way of looking up all GREEK SMALL LETTER, for instance?
I have tried to find out where those names are stored, but I haven't found them in NQP, Rakudo or MoarVM source. Any idea?
You can just go through all of Unicode codepoints, and test them
(0..0x10FFFF).grep: *.uniname.starts-with('GREEK SMALL LETTER ');
You might want to get the values that are Greek and lowercase instead of only the ones that have GREEK SMALL LETTER in their name.
(0..0x10FFFF).grep: {
.uniprop('Script') eq 'Greek'
and
.uniprop('Lowercase')
}
Please help find superscript j Unicode character code, if it is present. If not, do you know why?
I look up on Wikipedia. There is ⁱ, but no j.
Well, there's U+02B2 MODIFIER LETTER SMALL J. That said, as the name implies, it's intended for cases where a superscript 'j' serves as a sort of diacritic (e.g. in IPA, where it denotes that the previous consonant is palatalized). Using it as a pure superscript would be cheating; see "Why doesn't Unicode have a full set of superscripts and subscripts?" in the Unicode FAQ.
I am using asciimath, mathjax, and tinymce, and for some reason the lowercase delta and capital delta are the same thing.
The lowercase looks like a cursive-y d, and uppercase is supposed to be a triangle right?
I can't figure out if this is a bug of if I'm missing something.
There's a demo of what I'm trying to do here, click on the summation symbol in the menu to see what I'm talking about. It has the same issue.
Suggestions?
Edit:
Actually, I just looked at it again, and all of the greek letters where both lowercase and capital are listed are having this problem.