i want to rotate my UIview to particular angle and stop that rotation in that angle.any help pls?
To rotate a UIView, change its .transform property.
theView.transform = CGAffineTransformMakeRotation(M_PI * 25 / 180);
Use UIView animation block to animate the rotation, as usual.
Related
I am just trying to have a vertical slider and progressBar in my iPhone app, but every time I try to transform them to rotate them 90 degrees, they either disappear or stretch. Is there a way to prevent this? All I want to happen is for the slider and progress bar to appear vertical but stay the same size and have the same appearance.
Addition:
I found the code on here how to rotate:
define DEGREES_TO_RADIANS(angle) ((angle) / 180.0 * M_PI)
[self.progressView setTransform:CGAffineTransformMakeRotation(DEGREES_TO_RADIANS(angle))];
I am creating the slider and progress view in the stoyboard, linking it to variables I've declared in the ViewController.m. As the "angle" increases the progress bar and the slider increasingly stretch. In the end when I rotate 90 the progress bar disappears and the slider appears just to be a thumb image but no slider bar.
#define DEGREES_TO_RADIANS(angle) ((angle) / 180.0 * M_PI)
- (void)viewDidLoad
{
[super viewDidLoad];
// Do any additional setup after loading the view, typically from a nib.
//Create a transformation with just the rotation
CGAffineTransform transform = CGAffineTransformMakeRotation(DEGREES_TO_RADIANS(90));
//Now apply our scale
transform = CGAffineTransformScale(transform, 2, 2);
//Now set the transform on the object to the combined rotation/scale transform.
[self.shield2 setTransform: transform];
CGAffineTransform sliderRotation = CGAffineTransformIdentity;
sliderRotation = CGAffineTransformRotate(sliderRotation, -DEGREES_TO_RADIANS(89));
self.shield.transform = sliderRotation;
}
Auto layout doesn't play well with transforms. Either disable auto layout or remove any constraints between the transformed controls and other views and position the controls “by hand”.
I have a sublclass of a CCSprite that rotates throughout the game and there is a shield that has to rotate around the sprite according to the sprite's rotation. So if the sprite's rotation is 75 degrees there should be a CGRect located at 75 degrees. The dimensions of the CGRect are subordinate as it almost resembles a square.
What I did is:
I subclassed CCSprite and added a property called shieldArea.
Upon initialization I set this rect to be
self.shieldArea = CGRectMake(self.position.x-30, self.position.y, 8, 10);
Then I rotate the sprite itself, however, the rect stays at its initial position.
I hoped that the CGrect would be affected by the rotation, but I kind of expected it not to affect it, of course, why should it ? So, my question is, how do I rotate a CGRect at all ? Or do I have to add a new CGRect all the time ?
Side notes: I do not want to use Box2d or anything the like. I handle collision detection myself.
Have you tried CGAffineTransform?
Something like this:
float centerX = myOldRect.origin.x + (myOldRect.size.width / 2.0);
float centerY = myOldRect.origin.y + (myOldRect.size.height / 2.0);
CGAffineTransform rotation = CGAffineTransformMakeRotation(someAngleInRadians);
CGAffineTransform moveAnchor = CGAffineTransformMakeTranslation(centerX, centerY);
CGAffineTransform centeredRotation = CGAffineTransformConcat(moveAnchor, rotation);
CGRect rotatedRect = CGRectApplyAffineTransform(myOldRect, centeredRotation);
Note, this is NOT tested. Use at your own risk :p
I have two images.
One image is rectangle
second is triangle
i want to rotate tringle image from the center point of rectangle image using one finger or touch event.
Well, the math for this will get decently complex if you wish for the image to rotate in a circle of any size around the rectangles center point, but a good start would be to define the anchor point of the triangle image view, e.x.
#import <QuartzCore/QuartzCore.h>
#define degreesToRadians(x) (M_PI * x / 180.0)
[[triangleImageView layer] setAnchorPoint:CGPointMake:(0.5,0.0)];
[UIView animateWithDuration:1.0 animations:^{
[triangleImageView setTransform:CGAffineTransformMakeRotation(degreesToRadians(90))];
}];
Finally i found that i have to use [view.layer setAnchorPoint:CGPointMake(0.5, 0.5)]
and it solve my problem.
I have a custom UIImageView, I can drag it around screen by making a translation with (xDif and yDif is the amount fingers moved):
CGAffineTransform translate = CGAffineTransformMakeTranslation(xDif, yDif);
[self setTransform: CGAffineTransformConcat([self transform], translate)];
Let's say I moved the ImageView for 50px in both x and y directions. I then try to rotate the ImageView (via gesture recognizer) with:
CGAffineTransform transform = CGAffineTransformMakeRotation([recognizer rotation]);
myImageView.transform = transform;
What happens is the ImageView suddenly moves to where the ImageView was originally located (before the translation - not from the moved position + 50px in both directions).
(It seems that no matter how I translate the view, the self.center of the ImageView subclass stays the same - where it was originally laid in IB).
Another problem is, if I rotate the ImageView by 30 deg, and then try to rotate it a bit more, it will again start from the original position (angle = 0) and go from there, why wouldn't it start from the angle 30 deg and not 0.
You are overwriting the earlier transform. To add to the current transform, you should do this –
myImageView.transform = CGAffineTransformRotate(myImageView.transform, recognizer.rotation);
Since you're changing the transform property in a serial order, you should use CGAffineTransformRotate, CGAffineTransformTranslate and CGAffineTransformScale instead so that you add to the original transform and not create a new one.
Sorry if this is obvious or covered elsewhere, but i've been googling all day and haven't found a solution that actually worked.
My problem is as follows: I am currently drawing an image in a full screen UIView, for examples sake we'll say the image is in the bottom right corner of the UIView. I'd like to do a rotation transform(CGAffineTransformMakeRotation) at the center of that image, however, by default the rotation command rotates around the center of the UIView it self. As a result, my image moves around the screen when i rotate instead of it staying in place and rotating around its own center.
From what i've gathered, i need to translate my context so that the origin(center of the UIView) is at the center of my image, Rotate, and then restore the context by translating back to the original spot.
The following is the closest thing i've gotten to work, but the problem is that while the image is rotating, it moves downward while it's rotating. I think this is caused by animation tweening the 1st step translate and 3rd step translate instead of just realizing that the beginning and end point on the translates would be the same...
// Before this i'd make a call to a function that draws a path to a passed in context
CGAffineTransform inverseTranslation = CGAffineTransformMakeTranslation( transX, transY );
CGAffineTransform translation = CGAffineTransformMakeTranslation( -transX, -transY );
CGAffineTransform rot = CGAffineTransformMakeRotation( 3.14 );
CGAffineTransform final = CGAffineTransformConcat( CGAffineTransformConcat( inverseTranslation, rot ), translation );
// Then i apply the transformation animation like normal using self.transform = final etc etc
I've also tried stuff like CGContextTranslateCTM and CGContextSaveGState/UIGraphicsPushContext, but these seem to have little effect.
I've been fighting with this for days and my current solution seems close, but i have no clue how to get rid of that translating tweening. Does anyone have a solution for this or a better way to go about this?
[update]
For the time being i'm drawing my image centered at the UIview's center and then setting the UIView.center property to the origin i'd like to rotate and then doing the rotate command. Seems like a bit of a hack, but until i can get the real translates working it's my only choice.
Thanks!
duncanwilcox' answer is the right one, but he left out the part where you change the anchor of the view's layer to the point you want to rotate around.
CGSize sz = theview.bounds.size;
// Anchorpoint coords are between 0.0 and 1.0
theview.layer.anchorPoint = CGPointMake(rotPoint.x/sz.width, rotPoint.y/sz.height);
[UIView beginAnimations:#"rotate" context:nil];
theview.transform = CGAffineTransformMakeRotation( 45. / 180. * M_PI );
[UIView commitAnimations];
This is documented here: http://developer.apple.com/documentation/Cocoa/Conceptual/CoreAnimation_guide/Articles/Layers.html
This is also an option: a simple change of basis ;-)
CGAffineTransform transform = CGAffineTransformMakeTranslation(x, y);
transform = CGAffineTransformRotate(transform, angle);
transform = CGAffineTransformTranslate(transform,-x,-y);
where (x,y) is the rotation center you like
Rotation happens around the anchorPoint of the view's layer. The default for the anchorPoint is the center (0.5, 0.5), so the rotation alone without the translations should suffice.
Did a quick test and this works for me:
[UIView beginAnimations:#"rotate" context:nil];
self.transform = CGAffineTransformMakeRotation( 45. / 180. * 3.14 );
[UIView commitAnimations];
If you don't want an animation to occur, but just set the new rotation, you can use this:
CGFloat newRotation = 3.14f
[UIView beginAnimations:nil context:NULL];
[UIView setAnimationDuration:0.0]; // no tweening
CGAffineTransform transform = CGAffineTransformMakeRotation(newRotation);
self.transform = transform;
[UIView commitAnimations];
The rotation should indeed take place around the center of the UIView. Setting the animationDuration to zero garantees no tweening should happen.
Be sure though you don't do this 60 times a second. It's very tempting to create game like animations with these tools. These kind of animations aren't exactly meant for a frame to frame based, "lots of sprites flying everywhere" game.
For that - and I've been down that road - the only way to go, is OpenGL.