I downloaded Eclipse for C++ v 3.6 32-bit version on my Windows 7 64-bit OS.
I can build and run my code, but I cannot debug.
I am using MingW32 compiler v5.1.6 with GDB v7.1 .
When try to "debug" my application, the progress tab shows "Launching: Configuring GDB" at 86% for infinite time. The stop button beside the progress bar does not work where says "Cancel Requested". Your help is appreciated.
Problem fixed. MinGW\bin folder did not have the file libexpat-1.dll for some reason. Downloaded the file from here and extracted to MinGW\bin and everything working smoothly :)
Related
When debugging a c++ app, and hitting a breakpoint, gdb terminates the debug session when I click on a variable to expand its content in the Variables panel.
The displayed message is: <terminated, exit value: 0>gdb (10.1.90.20210103)
Printing the variable from the Debugger Console works correctly.
Debugging was working OK some weeks ago. The major changes that happen recently was a debian upgrade from 10 to 11 (bullseye), and an upgrade of the Eclipse version.
Activating gdb traces following where can I find GDB traces, I could see the commands sent to GDB, but no particular error before GDB stopped.
Any idea of what could cause this issue?
Eclipse Version: 2021-12 (4.22.0), Build id: 20211202-1639 running on linux debian bullseye.
I answer my own question.
After checking related answers, I suspect that the problem is linked to stl pretty printing in Eclipse (which was working fine before). I tried different version of Eclipse and gdb, and finally managed to fix the issue by using a previous version of gdb (8.3 instead of 10.1).
Here is the procedure that I followed (I'm not sure all steps are mandatory).
Reinstalled eclipse from scratch
Deleted the .metadata directory and recreated the eclipse workspace
Downloaded version 8.3 of gdb sources, and compiled it with python support ('./configure --with-python'). Note that libgmp-dev and python2.7-dev debian packages must be installed.
Copied gdb-8.3 somewhere under /usr/local/
Updated eclipse preference settings : C-C++/Debug/GDB and change GDB Debugger to the pach where gdb 8.3 executable was located under /usr/local/.
Checked in Debugger Console that the right gdb version is displayed. If this is not the case, you may have to set gdb using Debug As.../Debug Configurations/Debugger/GDB Debugger
I've installed Eclipse Neon.3 on my windows 7 machine, after the install process has finished, the installer has an option to 'launch now', which I do and the IDE boots up and works as expected.
However when I close eclipse and then reopen it, I get a crash which prevents it from booting up (sorry for this being a picture, but there doesn't seem to be an easy way to copy the text):
The version I've installed is Release 4.6.3, and the build ID is 20170314. I've installed and removed it 3 times and observed the same behaviour each time. I've tried doing a reset between boots and installs. I've also tried inspecting my environment variables, which look like this:
JAVA_HOME:C:\Program Files\Java\jdk1.8.0_91
PATH: %PATH%;%JAVA_HOME%\jre\bin
Is this a known issue, or do I have something wrong in my setup? Prior to this I discovered 4 versions of the jre/jdk on my machine, and two versions of eclipse. I think I have correctly removed all but the one referenced from my java home, and I entirely removed eclipse and downloaded the latest version (neon.3).
I've fixed the issue, and whilst I'm still not entirely sure why it was a problem, here is how I fixed it.
I opened a terminal and ran 'java -version' (I should have done this first). It was failing to find java.exe, despite the bin folder being on the path. Running this revealed that it was actually calling a shortcut to java.exe found in 'c /programdata/oracle/java/javapath/' which pointed to a now non existent version of java.
So long story short, if you have a similar problem, check if you have shortcuts in the folder 'c /programdata/oracle/java/javapath/java.exe' and ensure they point to the correct program.
Using the installer, I installed Eclipse Neon 3 (64 bit) on to my Windows 10 workstation. To get going and test my install, I ran simple "hello world" app. The trouble was that I expected the Console window to show my output.
I did see the console window open, but instantly disappear again. Nothing I do will keep this window open in the IDE. Any solution?
On my hunt for an answer I read an old post re: no console output that led me to downloading the 32 bit version. This solved the problem. Bug 516182 logged.
I have some problems with eclipse indigo x64 Linux; The problem is using windowbuilder (the SWT); I tried using gwt or swing but they both cause either windowbuilder freeze or even eclipse crash...
The alike issue it seems I found related info in official eclipse indigo offline Help which says :
How can I prevent the preview window from flashing under Linux using Metacity
In order to create the graphics that you see in the design view,
WindowBuilder Pro creates an off screen window containing the various
widgets and they takes a screen snapshot of them. This works very well
under Windows, OSX and some versions of Linux. Recent versions of the
Metacity window manager (more recent than 2.1.4), however, have been
modified/"fixed" to disallow windows to be opened off screen. This
forces the preview window to appear on screen leading to an annoying
flashing effect any time you make a change. The solution is to disable
the Metacity "fully_onscreen" constraint by patching the Metacity
source code and rebuilding and installing the patched version into
your system.
Here are the steps to follow:
Download the Metacity source code from ftp://ftp.gnome.org/pub/gnome/sources/metacity/
Unpack the source code tarball into any temporary directory.
Chdir into this directory (with the unpacked code).
Find window.c file and open it with your favourite texteditor.
Find a line with "window->require_fully_onscreen = TRUE;"
Replace it with "window->require_fully_onscreen = FALSE;"
Save the changes and close the editor.
Open a terminal and chdir into the directory with the source code (nice if you have already done this)
Run "./configure".
Run "make all".
Make sure that steps 9 & 10 completed without errors.
Become root (or execute the next command via "sudo" depending on the Linux you are running)
Run "make install" (or "sudo make install").
Save your work and close any application you are working with.
End your session (or press Ctrl-Alt-Delete to restart the x-server) and log in again.
You are done!
well seems like I have the snapshot really but, as I can get it, the snapshot doesn't want to dispose or similar so I have either resize the whole eclipse or press F5 to refresh (which works not at once);
I am not sure how to fix the issue in case I have xfce+adwaita installed? I don't have metacity installed; Seems like xfce works with gtk instead of metacity (correct me if I am wrong);
So my question is... how to fix the "window flashing or freezing" if I have :
xfce4
adwaita-dark theme
linux arch x64ce
Thanks
Try to install install libswt-gtk-3-jni and libswt-gtk-3-java.
I just got this MSI wind netbook and tried to run eclipse on it. I installed JDK6 on the netbook already. Whenever I open eclipse there is nothing show up on the screen except a "warning sound" that alerts. What is the problem here?
ps.I just started learning java.
Most likely the Eclipse starter program can't find where you installed Java. Since Eclipse is a Java program, it needs a JRE installed (comes with the JDK typically) to run. Assuming you're running Windows on your MSI Wind, check to make sure the java executable is on your path in your computer environment settings (windows key + printscreen button, or windows key + pause button are the shortcuts to open the computer properties dialog if I remember correctly. Then go to advanced).
You can test if java is on the path by opening a cmd.exe shell window and typing 'java'. If it says it cannot find java, then you need to fix the path.
See this link for additional troubleshooting details: http://www.eclipsezone.com/eclipse/forums/t99010.html
You could try reinstalling the JDK. Perhaps having it on a different disk than the default (D: versus C:) is causing some trouble? It certainly isn't a problem with the hardware, I'm running Eclipse on Windows on an MSI Wind.
Use "Add/Remove programs" in the control panel to remove the java versions you have installed.
Then visit "java.com" and use it to install Java, and verify that it is working. You do not need more than that to use Eclipse.