I just got this MSI wind netbook and tried to run eclipse on it. I installed JDK6 on the netbook already. Whenever I open eclipse there is nothing show up on the screen except a "warning sound" that alerts. What is the problem here?
ps.I just started learning java.
Most likely the Eclipse starter program can't find where you installed Java. Since Eclipse is a Java program, it needs a JRE installed (comes with the JDK typically) to run. Assuming you're running Windows on your MSI Wind, check to make sure the java executable is on your path in your computer environment settings (windows key + printscreen button, or windows key + pause button are the shortcuts to open the computer properties dialog if I remember correctly. Then go to advanced).
You can test if java is on the path by opening a cmd.exe shell window and typing 'java'. If it says it cannot find java, then you need to fix the path.
See this link for additional troubleshooting details: http://www.eclipsezone.com/eclipse/forums/t99010.html
You could try reinstalling the JDK. Perhaps having it on a different disk than the default (D: versus C:) is causing some trouble? It certainly isn't a problem with the hardware, I'm running Eclipse on Windows on an MSI Wind.
Use "Add/Remove programs" in the control panel to remove the java versions you have installed.
Then visit "java.com" and use it to install Java, and verify that it is working. You do not need more than that to use Eclipse.
Related
I've installed Eclipse Neon.3 on my windows 7 machine, after the install process has finished, the installer has an option to 'launch now', which I do and the IDE boots up and works as expected.
However when I close eclipse and then reopen it, I get a crash which prevents it from booting up (sorry for this being a picture, but there doesn't seem to be an easy way to copy the text):
The version I've installed is Release 4.6.3, and the build ID is 20170314. I've installed and removed it 3 times and observed the same behaviour each time. I've tried doing a reset between boots and installs. I've also tried inspecting my environment variables, which look like this:
JAVA_HOME:C:\Program Files\Java\jdk1.8.0_91
PATH: %PATH%;%JAVA_HOME%\jre\bin
Is this a known issue, or do I have something wrong in my setup? Prior to this I discovered 4 versions of the jre/jdk on my machine, and two versions of eclipse. I think I have correctly removed all but the one referenced from my java home, and I entirely removed eclipse and downloaded the latest version (neon.3).
I've fixed the issue, and whilst I'm still not entirely sure why it was a problem, here is how I fixed it.
I opened a terminal and ran 'java -version' (I should have done this first). It was failing to find java.exe, despite the bin folder being on the path. Running this revealed that it was actually calling a shortcut to java.exe found in 'c /programdata/oracle/java/javapath/' which pointed to a now non existent version of java.
So long story short, if you have a similar problem, check if you have shortcuts in the folder 'c /programdata/oracle/java/javapath/java.exe' and ensure they point to the correct program.
I recently decided to start trying Android app development, so I downloaded the Java SE Development Kit 8 (x86) for Windows (I got Windows 8 64bit, but my guide recommends getting the 32bit one), the Android SDK, and the Eclipse IDE for Java Developers (x86).
However, my Eclipse won't launch when I double click eclipse.exe! Instead, I get the following error message:
I tried adding Java to my Path variable in my Environment variables as suggested in some of the solutions I looked up, but it still doesn't launch properly.
Anyone know what else I can try? Also, if possible, please do not use super-technical vocabulary as I'm new to these kinds of stuff and will not understand you...thank you haha :D
I had the same issue and was trying to install different versions of JDK: 1.6, 1.7, 1.8.
It didn't help much.
The problem was resolved when I changed PATH variable by removing
C:\ProgramData\Oracle\Java\javapath;
In command prompt I also ran following commands:
set JAVA_HOME=C:\Program Files\Java\jdk1.8.0_25
set PATH=C:\Program Files\Java\jdk1.8.0_25\bin;%PATH%
But I think the most important was to remove C:\ProgramData\Oracle\Java\javapath; from the PATH.
I know exactly how to solve your problem. Go to search and put in environment, a prompt will come up and ask you to "Edit environmental variables for your account" click that and a window will pop up. There will be the current paths which are running on the top (you should have your JDK version running, mine is 1.8) and on the bottom part there will be paths to choose from. Select (on the bottom part) the java path and delete it, then click okay. This should work.
If it didn't work, You may also add a new path to the java bin folder which worked for me.
Here is an alternative:
As described here, make sure that you have the -vm option set in your eclipse.ini file.
It must be an absolute path and on 2 separate lines:
-vm
<Absolute Path>\javaw.exe
Save your .ini and relaunch Eclipse
One line answer, remove 'C:\ProgramData\Oracle\Java\javapath;' from your path variable. It will start to work.
Most errors with starting eclipse happen due to multiple JRE or JDK version which makes the installer go nuts.
Solution: Go to Control Panel -> Uninstall Programs
If you're running 64-bit java, then uninstall all Java without the 64bit indicator. If 32-bit, then uninstall all that have 64-bit
It works like magic!
What worked for me was having installed adoptopenjdk11 using Chocolatey package manager:
choco install adoptopenjdk11
I have some problems with eclipse indigo x64 Linux; The problem is using windowbuilder (the SWT); I tried using gwt or swing but they both cause either windowbuilder freeze or even eclipse crash...
The alike issue it seems I found related info in official eclipse indigo offline Help which says :
How can I prevent the preview window from flashing under Linux using Metacity
In order to create the graphics that you see in the design view,
WindowBuilder Pro creates an off screen window containing the various
widgets and they takes a screen snapshot of them. This works very well
under Windows, OSX and some versions of Linux. Recent versions of the
Metacity window manager (more recent than 2.1.4), however, have been
modified/"fixed" to disallow windows to be opened off screen. This
forces the preview window to appear on screen leading to an annoying
flashing effect any time you make a change. The solution is to disable
the Metacity "fully_onscreen" constraint by patching the Metacity
source code and rebuilding and installing the patched version into
your system.
Here are the steps to follow:
Download the Metacity source code from ftp://ftp.gnome.org/pub/gnome/sources/metacity/
Unpack the source code tarball into any temporary directory.
Chdir into this directory (with the unpacked code).
Find window.c file and open it with your favourite texteditor.
Find a line with "window->require_fully_onscreen = TRUE;"
Replace it with "window->require_fully_onscreen = FALSE;"
Save the changes and close the editor.
Open a terminal and chdir into the directory with the source code (nice if you have already done this)
Run "./configure".
Run "make all".
Make sure that steps 9 & 10 completed without errors.
Become root (or execute the next command via "sudo" depending on the Linux you are running)
Run "make install" (or "sudo make install").
Save your work and close any application you are working with.
End your session (or press Ctrl-Alt-Delete to restart the x-server) and log in again.
You are done!
well seems like I have the snapshot really but, as I can get it, the snapshot doesn't want to dispose or similar so I have either resize the whole eclipse or press F5 to refresh (which works not at once);
I am not sure how to fix the issue in case I have xfce+adwaita installed? I don't have metacity installed; Seems like xfce works with gtk instead of metacity (correct me if I am wrong);
So my question is... how to fix the "window flashing or freezing" if I have :
xfce4
adwaita-dark theme
linux arch x64ce
Thanks
Try to install install libswt-gtk-3-jni and libswt-gtk-3-java.
Just installed Eclipse Mars on Lubuntu 14.
While scrolling up and down in the console or editor - I get a kind of black rectangle covering some text, or the test is kind of twisted visually (lines become non-straight).
Anyone know how to fix this?
Haven't had this in previous versions of Eclipse on the same comp.
Exactly the same thing happened to me installing Eclipse Mars on Lubuntu 14 Toshiba Satellite notebook. I was really looking forward to the day of the Eclipse annual release of Mars and I was disappointed to be so disappointed with 5 minutes on installing.
Anyway, I can confirm that setting environment variable SWT_GTK3=0 by way of export does circumvent the problem. If you open a terminal and type "export SWT_GTK3=0" in the shell, you will also need to start Eclipse via the command line while remaining in the same shell. If you start Eclipse via a desktop launch icon, Eclipse will not see the SWT_GTK3 environment variable and the problem will persist. This is because environment variables in Linux are per-process and an application launched from the desktop is running in a different process to a shell process in a terminal.
So that Eclipse always sees the correct SWT_GTK3 environment variable after starting your machine, best you export SWT_GTK3=0 globally. To do this on Lubuntu, follow these steps:
Open a terminal window
Open the file /etc/profile for editing as sudo (e.g. sudo gedit /etc/profile)
Add the line
export SWT_GTK3=0
at the end of the file.
Save file, quit editor and reboot your machine.
Launch Eclipse Mars and hopefully your scrolling problem is fixed.
This worked for me but, as always, YMMV.
btw. You can check the SWT-GTK3 environment variable was exported after rebooting by opening a terminal window and typing the 'env' command. You should see
SWT_GTK3=0 in the list of environment variables and values that are displayed.
It seems like a new bug:
https://bugs.eclipse.org/bugs/show_bug.cgi?id=469027
It happens also under Kubuntu. Anyway the workaround, at least for me, is to export the following environment variable:
SWT_GTK3=0
I solved my problem in Ubuntu 15.04 with Eclipse Mars by adding the following code in the start of data in the Exec option in eclipse.desktop (/home/.local/share/applications):
Exec=env UBUNTU_MENUPROXY=0 SWT_GTK3=0 /usr/lib/jvm/...
In that way you leave intact your OS preferences and act only on Eclipse starting script.
I'm running this on Windows 7 SP1 with most (if not all) current patches. I have administrative permissions on this machine.
The first time I ran VSCodeSetup.exe, it ran the installer for several minutes then launched the actual application.
I got called into a surprise meeting, so I closed it thinking I'd look at it again later.
However, when I returned to my computer and tried to launch it, I found no evidence that it was actually installed... no desktop icon, no entry in the start menu, no Explorer integration...
I tried running VSCodeSetup.exe again, but all it does it show the installer screen for a split second, which then vanishes.
Since then, I've tried the suggestions outlined in VSCode Installation Failed - Failed to extract installer to install the application, even going so far as to run Update.exe --uninstall followed by running VSCodeSetup.exe again, but nothing has worked.
I even tried disabling my antivirus software and running the installer again, to no avail.
Does anyone know what I can do to get VSCode working again?
According to the comments and answers to Install VSCode in a specific folder, Visual Studio Code installs itself to %LOCALAPPDATA%\Code on Windows.
While I'm not sure why it didn't register itself with Explorer, I can at least create a shortcut to %LOCALAPPDATA%\Code\bin\code.cmd (with icon %LOCALAPPDATA%\Code\app.ico) to get it working again.
Or remove the directory entirely and run VSCodeSetup.exe to install it again, which still doesn't add Explorer integration... but this time at least the PATH now has code in it.
On windows VSCode is installed as Code.exe and its located in your
C:\Users\<windows-user>\AppData\Local\Code\app-<version-number>\Code.exe
or
C:\Users\John\AppData\Local\Code\app-0.5.0\Code.exe