I try to start fiddler 2 and I get this message box:
Fiddler 2 startup aborted
Fiddler appears to be running in this users account
Maybe in a terminals services session
I loaded fiddler onto another machine on our wireless network and it displays the same message. How do I fix this so I can run fiddler normally?
Do you see the problem with the latest version? https://www.fiddler2.com/dl/fiddler2alphasetup.exe
Related
I use a local Python web server on my Windows machine. It’s simple, but good enough while in the static web page development stage. I just run it with something like this on my WSL command line:
python3 -m http.server
I can also access it on mobile devices on the same network, by going to my local address, e.g.: http://192.168.1.12:8000. All was good, until suddenly I could no longer access it on external devices, I got a “server not responding” type of message. Also, I could clearly see that when I refreshed the page on my phone, there was no GET request on the logs.
Immediately I tested on the local machine, and it was still working fine. This obviously smelled like a Firewall. In Linux, I’d know what to do, but it’s the first time I had to deal with this on Windows. This is what I’ve tried, without resolving the connection problem:
I opened the Event Viewer but could not see any obvious logs to check
I stopped the server (CTRL+C) and started it again on another port (5000). The Windows Firewall message popped up again asking for permission for Python3 to access the “Public network” and the “Private network”. Normally I just tick the “private network” but this time I checked both, as a troubleshooting step, in case my Wi-Fi was incorrectly being considered “public”.
I went to Windows Firewall and temporarily shut it down on the private network.
I installed and tried running nmap on the WSL, but it failed to run and prompted me to install the Windows version instead.
I installed and ran the Windows version of nmap but it told me that port 5000 was open.
What is the recommended way to troubleshoot and fix this issue?
Still suspecting the firewall, I tried something new, I switched off the “public network” firewall. I tested on my mobile and the page loaded as normal again! I immediately turned the firewall back on. Tested the page on my mobile once more, still fine. So, the solution was to toggle the public network firewall. I would make it more generic and toggle all firewall categories on Windows. And of course, I would make sure that the firewall stays on, this was a very quick operation.
I thought I’d put this here rather than ServerFault or SuperUser as it could potentially be more useful to developers, and it took a precious hour of my time. I still don’t know why it stopped working on its own in the first place. Better troubleshooting steps or suggestions are welcome, but I probably won’t be able to verify it as I don’t know how to purposely induce the issue.
Another solution that worked another time, was to delete all instances of Python 3.8 from the list of allowed apps (I don't know why Windows shows the same app multiple times) then (re)start the Python server and allow it through when the Firewall question pops up again.
In windows firewall you may have 4 options to configure your local web server when you are creating new Inbound connections rule.
1 Program
2 Port
3 Predefined
4 Custom
Try to use port only in "TCP protocol" and the custom port.
Allow connection.
Select: all checks: domain, private and public.
Enter a name.
Thats all.
I am following this instruction http://docs.telerik.com/fiddler/Configure-Fiddler/Tasks/ConfigureForiOS. Everything works until section Set the iOS Device Proxy.
Once I set the proxy on my iPhone, I can't connect to the internet from the phone anymore. Not even accessing the echo page, which I could access before turning on the proxy on the phone. I already installed the root cert on my phone, the makecert add-on on Fiddler
Could someone help with ideas to diagnose the issue here? Thanks,
What might be stopping your iphone from reaching your Fiddler machine on the port specified, usually 8888?
Have you a firewall on the Fiddler machine? You might need to open
the port.
Does your LAN have an automatic redirect to a login page? Ours
does, so I have to disable the proxy on the iphone while I login,
then reenable it.
Does your LAN expose the IPs of cable-connected machines to WIFI
users? Not all do.
Can you browse a simple web page on your Fiddler machine from your
iphone, before starting fiddler or doing any proxy configuration?
You might need to get really serious and install a ping utility on the iphone.
I have Windows 8.1 installed on my computer and regularly use Fiddler to capture web traffic.
Recently, however, when I open Fiddler and
it strats to capture web traffic, my Internet connectivity dies.
The error I get when I open IE is "the proxy server isn't responding."
In Chrome, I get "Could not connect to proxy server" with the following error: "Error code: ERR_PROXY_CONNECTION_FAILED."
Fiddler doesn't even capture any of the requests going out. The weird thing is that Fiddler was working ok just some days ago and nothing was recently installed on my system.
Searching the Internet for 5 hours, trying everything, and no effective response.
This also had no effect: http://www.telerik.com/blogs/fiddler-and-internet-explorer-11-on-windows-8-1
It seems that the proxy server created by Fiddler is simply not attending to any traffic.
If I close Fiddler or disable the capture mode my internet come back to normal.
Uninstall and reinstall Fiddler does not solve the problem, neither restart Windows.
This question has some similarities with my problem, but as I said, none of the answers worked for me.
Why is Fiddler having this problem, and how can I fix it?
99% of the time, this is caused by running a 3rd-party firewall which is blocking access to Fiddler.
1% of the time, this is caused by plugging a Windows Phone device into your PC over USB. The Windows Phone team steals Fiddler's default port (8888) from it.
Running Help > Troubleshoot and updating your question with its output may help.
I'm trying to debug a Drupal 7 app with Xdebug. My app resides remotely in a server with Ubuntu running Apache.
In Netabeans, I started a proyect with "Application From Remote Server", connected with SFTP.
In the remote server I have installed Xdebug as zend_extension, also i configured xdebug.remote_connect_back=1, xdebug.remote_autostart=1, etc... I've tried everything with no luck.
The log from Xdebug has entries like this one:
Log opened at 2014-12-24 13:01:31
I: Checking remote connect back address.
I: Remote address found, connecting to 181.175.73.24:9000
E: Time-out connecting to client. :-(
Log closed at 2014-12-24 13:01:32
Based on the log it seems that my computer is not visible from outside on port 9000. But port 9000 in my laptop is opened, listening, with Netbeans, that's what happens when a debug sessions starts.
I think it's a problem with my ISP. My IP is not only for me, so I can't manage it's ports or other configuration. I think my PC is not visible from outside.
So, the question is, how can I avoid this limitation? What could I debug my APP from my computer on a remote server?
Every answer is welcome. Using a program, using a service, both... I tried using pagekite but honestly I couldn't find a configuration that works for me.
Thanks everyone.
PD: I don't want Xdebug alternatives that don't do step by step debugging.
PD2: My Xdebug config is attached.
remote_connect_back won't do it for you, it just tries to connect to the public ip, it's nothing magic.
Can you ssh on the remote server ? You might want to try port forwarding over a reverse ssh tunnel.
Full details from the creator of xdebug:
http://derickrethans.nl/debugging-with-xdebug-and-firewalls.html
Using XenApp6 on Windows 2008 R2 I have the windows Calculator as a test app. Apps are set to run on the server, and are not streamed to the client. When running Calculator from inside the network it runs as expected.
However, when accessing the app from an external web browser or Citrix Receiver, the client always times out and the Calculator app is not launched. I see incoming traffic on port 1494 (which is open) but there is no response from XenApp.
For both internal and external, I log in as Administrator and can see the citrix management console showing my test Calculator app.
Any ideas why it's timing out and not launching from the internet?
Thanks.
Chris
If the Citrix server's internal IP is being NATted to an external IP you may need to set an alternate address using altaddr on the Citrix server. Try this: Download the ICA file that the Citrix server passes when you launch a published app from a web browser, open it in a text editor, and see what FQDN or IP it is trying to connect to.