I'm trying to debug a Drupal 7 app with Xdebug. My app resides remotely in a server with Ubuntu running Apache.
In Netabeans, I started a proyect with "Application From Remote Server", connected with SFTP.
In the remote server I have installed Xdebug as zend_extension, also i configured xdebug.remote_connect_back=1, xdebug.remote_autostart=1, etc... I've tried everything with no luck.
The log from Xdebug has entries like this one:
Log opened at 2014-12-24 13:01:31
I: Checking remote connect back address.
I: Remote address found, connecting to 181.175.73.24:9000
E: Time-out connecting to client. :-(
Log closed at 2014-12-24 13:01:32
Based on the log it seems that my computer is not visible from outside on port 9000. But port 9000 in my laptop is opened, listening, with Netbeans, that's what happens when a debug sessions starts.
I think it's a problem with my ISP. My IP is not only for me, so I can't manage it's ports or other configuration. I think my PC is not visible from outside.
So, the question is, how can I avoid this limitation? What could I debug my APP from my computer on a remote server?
Every answer is welcome. Using a program, using a service, both... I tried using pagekite but honestly I couldn't find a configuration that works for me.
Thanks everyone.
PD: I don't want Xdebug alternatives that don't do step by step debugging.
PD2: My Xdebug config is attached.
remote_connect_back won't do it for you, it just tries to connect to the public ip, it's nothing magic.
Can you ssh on the remote server ? You might want to try port forwarding over a reverse ssh tunnel.
Full details from the creator of xdebug:
http://derickrethans.nl/debugging-with-xdebug-and-firewalls.html
Related
I've installed vinagre on my system and setup necessary settings on my server that I want to connect I've move my server and now when I want to connect I see this error(connection closed)!
I check and understood vnc connection is not on my server anymore! I don't know what happen exactly but I've active vnc on my server but still have problem for connecting. (I used these steps
Do you know any help or resource for solving this problem?
Both of my systems are Linux
I am running Xdebug extension on PHP webserver (IIS), and VSCode on different development machine.
When I start listening for Xdebug session in VSCode (with Felix Becker's PHP Debug) without proxy, everything works as expected.
Now I am trying to use dbgpProxy because there are multiple devs on the development machine.
I have tried to run dbgpProxy on the webserver and register to it by activating proxy settings in VSCode, but it fails with Connection refused. At the same time, Xdebug connects to the proxy just fine and proxy tries to forward incoming session based on IDE key but of course cannot find it because the registration failed.
So I tried running dbgpProxy on the development machine. This time VSCode registered successfully with the proxy, but when Xdebug tried to connect to the listening proxy, it failed.
I was pretty sure I knew what I was doing, ports were open, everything SHOULD work but it didn't.
It turned out to be a problem in the IP addresses.
I ran the proxy with default settings, which is localhost (127.0.0.1) for both server and client part with respective ports 9000 and 9001. Which was wrong (for my situation).
To listen to the incoming connections from another machine, proxy has to be configured with real IP address of the machine it is running on, otherwise it won't listen.
In my case I have decided to run the proxy on the server, so I run it with just one parameter for the incoming client connections and leave the server parameter default (which is 127.0.0.1:9000 and of course configure XDebug in php.ini to this address and port).
dbgpProxy.exe -i 10.123.54.76:9001
I'm developing a website on a server using NetBean's HTML5, CSS3, JavaScript and PHP support. I am trying to set up the remote connection so I don't have to use something like Filezilla every time to transfer my files to the server. However, NetBeans is unable to connect to my server over SFTP.
I'm unable to share screenshots with the actual information because this is for work and must be kept confidential.
Host Name is in the form: subdomain.domain.com
Username is just the plain username, it's NOT in the form username#subdomain.domain.com.
I am using a password, not a key.
I am behind my work's proxy but I don't think that could be the cause because NetBeans connecting to my server is the only thing that isn't working.
Filezilla works, Putty (SSH) works, Aptana remote connections (SFTP) works, all my browsers work. Even testing the proxy settings in the NetBeans general options works in NetBeans:
Anyway...
After entering in all of the server's information, I click "Test Connection". After 30 seconds (the timeout), this error pops up:
I tried looking in the NetBeans log to gather more information but it doesn't appear to be logging this error. Is there a certain debug flag I need to enable?
Like I said earlier, Filezilla and Aptana Studio can both connect to my server using the same login credentials.
Any suggestions?
Thanks for reading.
It turns out my system proxy settings (which were configured for my work's proxy) were preventing me from connecting to a server on my work's local intranet.
I had to add a proxy exception for the server and everything worked after that.
Already, I've checked at least 20 resources and am out of ideas:
I have a clean, remote Ubuntu EC2 instance, fresh from the AMI, having stopped only to install LAMP, phpmyadmin, and xdebug on it. Yes, I have configured my remote EC2 instance's php.ini file as follows:
Meanwhile, back on my laptop I have Netbeans & Eclipse installed. While I can get either to seamlessly upload and Run my php web app on my EC2 site (via SSH/SFTP) as soon as I hit "Debug" from either, index.php gets uploaded, a browser window opens, and then NOTHING HAPPENS. The page doesn't load, the Debug perspective doesn't open, breakpoints don't get triggered, nothing. Netbeans just hangs out saying "waiting for connection" whereas Eclipse just sits at the notorious 57% level (& yes, I toggled the xdebug.idekey before testing with Eclipse)).
So I tested xdebug's functionality on my server according to the instructions found here and here (both passed). I tried changing to port 9001 (in remote php.ini as well as in local Netbeans/Eclipse), I even tried launching this brand spanking-new EC2 instance with pretty much open Security group settings (SSH=0.0.0.0/0), but nothing seems to be working. I am out & out flummoxed, a self-confessed noob, and appreciative of any insight seasoned professionals in the community may have to offer.
Thanks,
Debbie
This feels like a networking issue to me. Port 9000 may not be accessible. The quickest way to test is to telnet to port 9000 on the remote system (if you have a telnet client installed that allows you to specify which port to telnet to). If the telnet attempt times out or is closed by the remote system you will see the error and this verifies that there is a networking issue.
I would check /etc/services to make sure that port 9000 is not reserved for use of something else. If port 9000 exists and is uncommented then something else is using the port and that services does not know how to respond to your request so it hangs.
I would do a netstat (lookup params to see "all" listening ports) and make sure the remote system is listening on port 9000. If you don't see port 9000 then the remote system is not configured to establish the connection.
If you are on a WIFI network then port 9000 may need to be port forwarded to the remote system using the internal cable modem configuration menu/utility. This is the scenerio I favor because I've wasted so much time solving this kind of problem with different software.
Good luck, you have more troubleshooting ahead of you and different questions to ask to resolve your problem.
On beforehand I have to say i'm a bit of a newbie.
I've sucscribed to a VPS with Ubuntu 11.04 server, I installed Jboss and am starting it with the -b 0.0.0.0 option.
Now if I lookup the address ip:8080 on a browser on the VPS itself it's working fine, but if I try to look it up on a browser on an external machine it isn't able to access the page.
I tried to modify the hosts file but without success. Maybe its the iptables? Or something else?
I really appreciate any help thanks.
Take the static IP of the server, ping that from your command line tool with ping. If you are successful in pinging the server you are all set. Now go to the browser of the external pc and type the static ip and give the port as 8080. It will certainly work.
Some good suggestion from my side is, try PaaS(platform as a service) now as that is much easier than VPS and you will get up and running in minutes. Try Jelastic. It has got JBoss hosting. Deploy your WAR file there and you can access it immediately. Ket me know if you really go ahead and use it.
Surya