I've just finished installing Hadoop 0.20.2 under Cygwin on Windows 7 with Eclipse Helios (3.6). Hadoop is now fully started, and I'm trying to run a test application within a newly created MapReduce test project in Eclipse. I'm using the Hadoop 0.20.2 plugin from the Hadoop download.
The Map/Reduce Location perspective operates correctly, as does DFS Locations tree in the Package Explorer. However, when I right-click the driver, select 'Run As' > 'Run on Hadoop', nothing happens and no errors spawn on the Console (silent fail :(). I believe a dialog window should appear asking for config before it runs, but this is not happening.
There seems to be a few others with the same problem, but I've yet to find an answer that works. I've tried the 0.20.1 plugin (total fail). The following bug report seems to describe my issue, though I'm a bit of a newbie to all this, so could do with a hand / voice of experience to help out: https://issues.apache.org/jira/browse/MAPREDUCE-1280
The hadoop eclipse plugin bundled with the hadoop distribution is compatible with eclipse up to version 3.3. The JIRA-ticket MAPREDUCE-1280 contains a patch for running the plugin in eclipse 3.4 and upwards.
I just compiled the patched plugin with the fixes from the JIRA-ticket MAPREDUCE-1280. The file is attached to the ticket. You can find it here.
Simply remove the old plugin from your eclipse-installation and put the new version of the plugin into the dropins-folder of your eclipse-installation.
After upgrading from an older version of the plugin you will have to start eclipse with the "-clean" command line switch. Help on eclipse command line switches can be found here.
I don't know whether the plugin has been updated or not, but as far as I know, that one is out of maintenance for several previous releases.
One of the solution is that you should download the source code and try to re-compile the jar file for that plugin (for the latest version of eclipse), however I didn't try it so don't know whether it is working.
Maybe you can try to use Karmasphere.
askswOrder is correct that the Eclipse plugin has not seen much attention for quite a long time. The JIRA you reference does provide a fix, but it's only been applied to Hadoop 20.3 and above. One option would be to try to apply the patch to 20.2 and recompile, but that's asking quite a lot from a newbie. I'd second the suggestion to use Karmasphere; it's a great product for working with MapReduce and those gents have taken on the work of staying current with Hadoop releases.
Related
I have an issue with Eclipse,
Eclipse macOS High Sierra version 10.13.6
I keep getting JVM terminated exit code=1
I have tried too many times but the response is same after launching it.
I have downloaded it from Stanford's SEE section and still unable to launch. The error message is here.
I downloaded your course material, and it does indeed contain a really old version of Eclipse - as greg-449 pointed out, there's no way this is going to work on macOS High Sierra. Really surprised instructions from 2007 haven't been updated, but that's another matter.
It would seem that your course just requires Java, so you can use the automated Installer that you find on this page: https://www.eclipse.org/downloads/ and then choose the Eclipse IDE for Java Developers in the wizard. Or you can download that package directly here, and install it.
Looking at your course material, it does appear that they have a custom plugin that makes regular Eclipse actions easier to execute, by adding a number of buttons to the Eclipse toolbar, you won't find these in a vanilla install. If you can find that plugin, you could try to install it into this version of Eclipse too, it might still work. If not, you can perform those steps manually - this video will help, as he shows you how to import and run these projects without those plugins, it's not hard!
It's not possible to say if the plugin adds functionality beyond what is normally possible in general Eclipse distributions, but I doubt it does. Good luck!
I have recently installed gwt-plugin to my eclipse. But plugins are are not visible, even if I try to install it again, eclipse is not allowing me to install, saying its already installed.I even I ran eclipse as administrator(I am using it in windows 7) and also with clean option, nothing worked out.
And one more thing, After GWT installation, it gave two options - 'Restart' and 'Apply changes'.I have chosen 'Restart'. (Does it matter?)
Any help is appreciated..
Maybe you installed gwt-plugin correctly, but you are missing one of its dependencies? Take a look at this thread. One of the answers discusses using the OSGI console to locate missing dependencies.
I decided to take a look at Clojure and thought the best and easiest method for me would be to use Netbeans with the Enclojure plugin as I didn't want to have to learn Emacs at the same time. I installed Netbeans 6.9.1 together with the latest JDK using the bundled install (on Windows 7). All went smoothly. I then followed the instructions at http://www.enclojure.org/gettingstarted for installing the enclojure plugin.
When creating a new Clojure application I get the following and see no project files :
java.io.IOException: Could not connect to URL nbresloc:/org/enclojure/ide/templates/project/ClojureProjectTemplate-1.1-distribution.zip. No such resource was found.
Maven is working using mvn --version
I have installed on both Windows 7 and Ubuntu 10.04 (same result).
I have looked on the Enclojure forum and there is a recent open thread for this issue, but it is not solved by anybody presently.
I have Java SE enabled in Netbeans
I have tried enabling the different platform versions of Clojure, 1.0.0, 1.1.0, etc..
The REPL seems to be working happily in Netbeans : (printf "hello") hellonill
I did try ClojureBox on Windows 7, but again that's Emacs, but emacs failed to start the server and hung there and became totally unresponsive.
I come from a .Net background (not Java) so my knowledge of the Java environment is somewhat lacking. My reason for looking at Clojure and not Java.
I am new to Netbeans
If you're interested in a working Maven pom, here is one I've used with Enclojure successfully:
http://puredanger.com/techfiles/100624/pom.xml
There are some project settings you'll need to change and a few dependencies to remove but it might be a good start. In general, I usually create the pom first and then just import the project into NetBeans rather than using the NetBeans options to create projects.
By the way, the REPL work in Enclojure has been split and is coming soon to the Eclipse plugin Counterclockwise.
I had written a small post on it on my blog.
Anyways here is the procedure:
On searching realized that this is a common problem for installing it on > Netbeans 7.. But with some manual tweeks managed to install it. Here are the instructions to install on Netbeans 7. plus:
Install Netbeans 7. You need only the Java SE version.
First Run of Netbeans after installation. Activate feature Java SE
Activate features is on the Start page or from Tools,->Plugins>Installed, click ‘Activate next to the Java SE support
Install Maven: It is HIGHLY recommended that you install maven: http://maven.apache.org/download.html
Go to the Netbeans->Preferences, click on the Miscellaneous tab and make sure the External Maven Home path is pointed to your maven install
Download the EnClojure 1.5 version from here. If you want to manually build, you can do that by following the instructions from here.
After downloading the file, In Netbeans: Goto:- Tools ->Plugins->Downloaded->Add Plugins->Downloaded
Then browse to the downloaded file. Later install by clicking at the “install : button.
Restart and you are on the go.
Visit here to build and run hello world project.Basically building the EnClojure 1.5 manually is the tough job. I hope above was useful.
When I try to install Eclipse plugins, I often get an error with details like:
An error occurred while collecting
items to be installed No repository
found containing:
org.eclipse.equinox.concurrent/osgi.bundle/1.0.0.v20090520-1800
This is clearly a bug in Eclipse. The bundle I'm installing doesn't need any special version of anything, it's just a profiler plugin that works in literally any build of Eclipse 3.4. Refusing to install my plugin is not an acceptable course of action. Eclipse should stop showing this message and install the plugin.
I'm not sure exactly what error the Eclipse developers made, but I can see that the version compatibility checker is absolutely strict, and it should not be. Either it is incorrectly evaluating the required bundles, and failing as a result of its own blunder, or the version requirements of the bundles are loosely defined in a way that the version checker does not really understand.
So, is there a way to simply disable this version checker? The thing is crippling my Eclipse install. Frankly, Eclipse would be better if the thing were completely deleted from the application. We only need it to choose the correct version of existing plugins for binding OSGi services. We don't need our development tools to kibitz about whether a plugin seems proper.
Thanks in advance for any suggestions.
Byron
As mentioned in the wiki
The message indicates that the Eclipse provisioning system P2 has found meta data to install a plug-in but can not locate an artifact repository that provides the required downloads
It is suggested to remove update sites and re-add the same update sites, to trigger a refresh, but in your case, it is not your plugin update site which is involved.
There is indeed a bug (236437) with Eclipse 3.4 about "Lost artifact repositories". It has been solved in Eclipse3.5, but if you cannot use that version, there may be a workaround:
1) export the update site listing to bookmarks.xml file (Software Updates->Manage Sites->Export)
2) stop eclipse
3) remove configuration/.settings/org.eclipse.equinox.p2.*.prefs files
4) start eclipse
5) import the bookmarks.xml file (Software Updates->Manage sites->Import) that was exported in step 1
Comment #59 helped me fix my updating problem, thanks!
Though, I think maybe it was enough to just delete the configuration/.settings/org.eclipse.equinox.p2.*.prefs files as I have a feeling that the problem was already resolved before I imported the bookmarks file (things happened a bit in parallel for me here).
Note for Eclipse3.5 users:
I am seeing this in 3.5.1 when trying to install stuff from an old style update
site when I include site.xml:
http://www.perforce.com/downloads/http/p4-wsad/install/site.xml
If I remove site.xml I can install things fine.
I'm trying to install the WTP (web platform tools) to my Eclipse installation so I can get the XSL transformations working. The base Eclipse they installed for me here was the plain Java IDE (the splash screen says "Ganymede" if that means anything). Looking at this site, the URL to get the download should be here: http://download.eclipse.org/webtools/updates/ ...But when I give that URL to the Eclipse update manager, I get an error telling me: "No repository found at http://download.eclipse.org/webtools/updates/"
Anyone else had this problem? Anyone know what might be up? Anyone know how to get the xsl-transform plugin installed?
EDIT:
I should have mentioned before that I want to find a way to do this without installing any new instances of Eclipse. This process will eventually be sent to several other developers who already have Eclipse (same version that I'm testing with) and I'd rather just do an in-place upgrade rather than have everyone go and install a new product.
UPDATE:
I found another plugin, Xcarecrows 4 XML which can also do XSL transforms. The interface is ugly and seems more than a little quirky, but it's also a small download, and at least it runs and transforms. Unless I can find an easy way to get WTP working, I'll probably just stick with this.
You can try and install WTP through the main Ganymede update site:
http://download.eclipse.org/releases/ganymede/
Or you can download the latest Java EE bundle and use that instead of your current Eclipse
(do NOT unpack it on top of your current Eclipse, but unpack it elsewhere, to test that second installation: it will come with WTP inside)
Note: check then "How do I start Eclipse" to point to your existing workspace in order to see all your previous project in your new Eclipse installation.
As mentioned in your link, XSL Tools is now part of WTP (for Eclipse 3.5 Galileo), and that may explain why your Eclipse Ganymede (3.4) might not interpret correctly the P2 update site for WTP (P2 being the new Eclipse provisioning mechanism introduced late in the 3.4 release cycle)
For Eclipse 3.5, you have an XSL Tools installation illustrated here:
But Eclipse3.4 is more likely to be compatible with XSLT0.5 and you will need a separate installation, because "XSL Tools" wasn't yet part of WTP.
I am not sure, however, where to find such an installation package within the Eclipse projects.
Use the following update site :
For Juno :
http://download.eclipse.org/webtools/repository/juno/
For Indigo :
http://download.eclipse.org/webtools/repository/indigo/
I'm assuming you don't have any firewall exceptions for Eclipse right?
The site for the WTP update is indeed the one you've listed. Maybe post a screenshot? You've added it specifically to your remote update site list?
Either way try a manual update which should be more reliable and get you up and running for now.
All-In-One Update (Eclipse IDE included):
Go to the Eclipse Download site.
Grab the all-in-one package: Eclipse IDE for Java EE Developers
Install, have a coffee and enjoy. (WTP is included)
Manual Update your existing installation of Eclipse:
Download the applicable WTP source package to your desktop
Shutdown Eclipse
Extract the package to your Eclipse installation directory
Startup Eclipse. (WTP is now available)
Follow the steps in the FAQ at http://wiki.eclipse.org/WTP_FAQ#How_do_I_install_WTP.3F .
Are you behind a proxy? If so, you need to make sure you configure your proxy settings in Eclipse.
Window > Preferences
General > Network Connections
Ok, I can probably get it working if I do a clean install of Eclipse. I can do that on my machine, but not the other team members' machines (at least not without going through many emails and paper work) so I'm going to say that XCarecrows 4 XML is the solution. It is able to do XSL transformations in Eclipse 3.4 and doesn't require anything else to be installed. Since XSLT is all I need, the plugin will do.
you can use the marketplace:
https://marketplace.eclipse.org/content/eclipse-java-ee-developer-tools-0
like the site says:
Drag to Install!Drag to your running Eclipse Workspace.