I am very new to Tomcat and web development in general and apologize for what may be a very silly question.
Consider 2 situations:
1.
I start Tomcat outside of Eclipse.
I use eclipse to create a war file.
I deploy it via admin console.
All is ok
2.
I start Tomcat via Eclipse
I can't access admin console
http://localhost:8080/manager/html greets me with 404 error
Same page is behaving properly when Tomcat is started outside of Eclipse
Please advise
Why might the issue be?
Why might the issue be?
You need to configure Eclipse to take control of your Tomcat installation. To do so:
double click on the Tomcat Server in the Servers view
under Server Locations, select Use Tomcat installation
This is illustrated on the screenshot below:
Eclipse creates a new Tomcat configuration separate to your Tomcat installation, in the 'Servers' project. This allows Eclipse to deploy webapps without interfering with anything you've done in your installation (via the manager app or by editing config files manually).
You can reconfigure Eclipse so that it uses the config from your Tomcat installation (see Pascal's answer), or to re-enable the manager app - but read the WTP Tomcat FAQ first as there are good reasons for it working the way it does. I don't recall ever needing to do this - the 'Servers' tab in Eclipse lets you deploy/start/stop/debug/configure apps as required.
Related
I'm currently using Eclipse Mars on OS X to build a PHP based application which requires a web server for a form submission. However, upon attempting to add Tomcat 7.0 as a server, the server list is empty (shown below).
I've been following several tutorials for setting up and configuring a Tomcat server and each one says to place the extracted Tomcat folder in the Eclipse workspace directory so they'll be detected when adding them in Eclipse. The Apache Tomcat folder is in the workspace directory but it still isn't being detected. I've tried reinstalling Eclipse and deleting any duplicate files but I keep getting the same result. How can I properly set up and configure an Apache Tomcat server in Eclipse Mars?
You can tell it about the Tomcat installation using the Server Runtime Environments preference page.
If Tomcat isn't already a known server type, you might need to install a few more. The WTP FAQ has instructions.
All of those tutorials are wrong. You do want to download a copy of Tomcat from Apache so it has the expected layout when Eclipse looks for the jars needed to launch it, but there's no reason to actually put it in the workspace.
I am also using Eclipse neon and I faced the same problem and the answer was available in a question Apache Tomcat Not Showing in Eclipse Server Runtime Environments in the same site already posted
Of the Available Answers the below steps Worked for me:
1.Help-->Eclipse Marketplace
2.Type Tomcat in search box and choose the Option JST Server Adapters(Apache Tomcat,...) and click on Install
3.Then complete the Simple installation steps and after installation Eclipse prompts for a restart accept and then you can see the Target Run time updated with Tomcat server
Note:I am using Windows
I have JBOSS server. I used to make web applications using just notepad++. I used to create the necessary folders like web-inf and files like web.xml. For larger projects doing all this and manually compiling has become cumbersome. I want to use eclipse for that. I saw this tutorial - http://www.eclipse.org/webtools/community/tutorials/BuildJ2EEWebApp/BuildJ2EEWebApp.html . But I don't understand how to make a server. I already have a server. What I want to do is write JSPs and Servlets in eclipse and the build should automatically be deployed in jboss server.
How to to this?
Install JBoss Tools
After that follow the instructions from here to get started and deploy apps to JBoss Server.
To automatically deploy apps after the build you could use a build tool such as ANT or Maven.
I wrote a tutorial for this some time ago: Setting up web development environments with Eclipse
It shows how to setup JBoss within Eclipse (in addition, it also shows how to setup Tomcat and Weblogic), and also shows how to build a simple sample Servlet to verify the proper installation.
If you already use JBoss on the server side, then have a look at the client side as well: http://www.jboss.org/developer
(I haven't tried it myself, but...)
Just open eclipse then go to:
"Help-> Check For Updates" It will check for eclipse updates and installs new availables.
Now "Help -> Eclipse Market Place" Search for "Jboss tools" from search result select one(as your eclipse version) and install it. It will add adapter for new jboss versions.
Now add new server from server view select Jboss version then next add your Home directory of jboss. Then finish.
Step 1 is optional but it sometime it helps.
I'm running Tomcat in Eclipse. I would like to see the Tomcat home page, however it doesn't show up. When I browse http://localhost:8080, then I get a HTTP 404 Page Not Found error.
How is this caused and how can I solve it?
Eclipse does by default not use Tomcat standalone. Instead, it overtakes its sole server engine and uses the workspace as deployment space instead of Tomcat's own /webapps folder. It also creates copies of configuration files like server.xml in the Servers project. It untouches the Tomcat installation. It untouches the Tomcat default homepage (and manager). It untouches existing deployments.
As the Tomcat homepage is not one of Eclipse projects (nor would become one), you won't see it when starting Tomcat from inside Eclipse like that. You would only see Eclipse projects which are deployed to the server by Add/Remove projects. I'm not sure why you need to see the Tomcat homepage as it has no utter value while developing Java EE web projects. But if you are really dead set on seeing it for some unclear reason, then you'd need to tell Eclipse to not only overtake its engine, but instead use the standalone installation at its entirety.
To configure that, double click Tomcat's entry in Servers view to open its configuration and in the Server Locations section, choose the option Use Tomcat installation.
You'll now be able to see Tomcat's homepage.
Again, the benefit is highly questionable. Do note that this way Eclipse will modify the Tomcat installation. So the Tomcat installation may not be reuseable across other IDEs/workspaces. You'd need to create a whole new Tomcat installation.
In eclipse,right click over tomcat server in servier view.
tomcate->properties.click switch location.
Try the following steps once:
1.Remove schoolManagementsystem folder and war file from webapps folder
2.Task Manager--> end the all java process
3.Now execute the command catalina.bat run in command prompt.
Hope this will help you .
Im new to Eclipse. I use Tomcat as my run time server, but every time I modified the jsp pages, Eclipse was still displaying the older one. Just wondering how to redeploy the application so the changes can be reflected.
Eclipse: Eclipse IDE for Java EE Developers 1.2.1.20090918-0703
Tomcat: Tomcat 6.0
Thanks
Doubleclick the server instance in question in the Servers view to open its configuration. Now, in the right top you should see a section called Publishing. Open it to verify and configure autopublishing settings.
Eclipse should do that automatically for you.
Otherwise, on the Servers view (Menu Window->Show View->Servers), you can right click on your Tomcat instance and hit "Publish" or "Restart"
Make sure you have the "JST Server Adapters" ("Web, XML and Java EE Development category") feature installed.
Eclipse's publishing functionality requries the project to be a "web project", and in some cases requires additional configurations.
Go to Windows > Preferences > Server > Runtime environments and add your tomcat
Either try using publishing, or (better I think) use the FileSync plugin. There you can tell which folders from your project should be copied (live) to what directory on your machine (the tomcat/webapps/yourapp). With a little more effort the filesync configuration can be made machine independent (only using one parameter as TOMCAT_ROOT), in case you want to check-in the project to a repository where others will use it.
Get the Tomcat plugin. It was nice because you can install Tomcat on your system and then associate your web app with that instance of Tomcat. The plugin will let you stop/start Tomcat and define a server such that when you do a build it knows how to deploy the changes. There may be some newer plugin but the Tomcat plugin worked for me and was fairly simple to install and use. Here is a page from IBM on using Eclipse and Tomcat. Inside that page it points you to the following: http://www.ibm.com/developerworks/opensource/library/os-eclipse-tomcat/
I'm developing on a Ubuntu 8.04 machine using Eclipse Ganymede. I installed Tomcat 5.5 using sudo apt-get install tomcat5.5 tomcat5.5-admin and using an Ant script I deploy my WAR file by copying it to $CATALINA_HOME/webapps.
I then created an Eclipse project and I have it output compiled source in a similar but separate directory structure under $PROJECT_ROOT/target/. I still deploy the WAR file by right clicking on the build.xml and choosing my deploy-war task.
As Tomcat is running as a deamon, automatically started up on booting, I'm not instructing it when to start or exit.
My problems with this setup are:
Using this approach I do not get any output to the Eclipse console, as Tomcat is running under the tomcat55 user and I have a different login and no access to Stdout of tomcat55.
The logging which occurs is also directed to Stdout at the moment, which I find pretty nice during development. But it's not nice when I can't see it. :-)
I don't have any servers under the Server tab and no Run configurations. This makes it impossible for me to use the Debug mode of Eclipse, which otherwise is quite convenient.
What do you think I should do to integrate them and in turn make my development environment much better?
I'd say forget the pre-packaged Tomcat. Grab the apache-tomcat-x.y.z.zip from the site, unzip it somewhere in your $HOME and add a Server to your eclipse workspace, pointing to your local installation of tomcat. Of course you need the j2ee/wtp Eclipse bundle. Works fine on Windows, can't see a reason for it not working on Linux.
Edit: You may have to fiddle with server ports if you have two tomcat installs.
Add Tomcat to the list of Eclipse servers and run your web-app on the server. If you need more details click here.
I never cared about 1 and 2, so I can't really help you with them.
regarding 3:
You don't need any servers under the server tab for debugging to work. Just start tomcat with these environment variables
export JPDA_ADDRESS=8000
export JPDA_TRANSPORT=dt_socket
and configure eclipse accordingly: run - open debug dialog - select remote java app and create a new configuration.
You need eclipse to manage a copy of tomcat, then it can debug it. The clue to the problem was that you have to push deploy-war, this means the files are leaving your development environment and entering an external server. On a properly configured development environment, you only need to save your java file, it will auto-compile and already be on the local tomcat install, which might try to auto reload the web-app, and you can refresh your browser without reloading anything on the server. Look up some more tomcat plugins, there are a few different ways to do this.
If you want to do regular debugging and relaunching of Tomcat apps, you might want to take a look at MyEclipse - it can make things a lot easier.