Hey all, I'm really new to iphone development and am getting really frustrated. I know ASP and Javascript and i'm trying to do this objective-c. I took a course on lynda and now i'm trying to hook up a tab view.
I placed buttons on the first view of the tab view controller. I then went into the header file and created the - (IBAction) for the 4 buttons on there and added the function in the implementation file. The problem is when i go back to Interface builder and try to connect the actions to the buttons, they don't show up. I have no actions listed in the File's owner so i can't do anything. Can anyone out there please help! thanks.
damien
You're doing it backwards (IMHO). create the Actions and Outlets (don't forget to save the source), then create the items in IB (note that you have to refresh IB so that it can re-read the source.
In tab view controller app make sure that class of view is your ViewController class and also in MainWindow.xib make sure all tabs are referencing respective ViewController
Related
I'm a beginner to iOS development, so forgive me if this is really basic. It's probably answered somewhere, but I've looked for a long time, and I'm struggling.
I have a second View on my story board that I've successfully linked to the first view using a Navigation controller and stuff, and I'm able to navigate to it. I can also add actions/outlets from elements on my first view by Control-dragging to the .h file.
I have a label on my second view, and I want to be able to do the same: add actions and outlets from elements. But when I try Control-dragging, nothing happens. What am I doing wrong, and how do I fix it?
Hmm, well first of all welcome to Stack Overflow! And thanks for asking the question.
Let me know if I have this right - you have two view controllers to the right (linked with segues) of a navigation controller and currently you can navigate to the second from the first using a button at the top right? Then when on the second view controller there's a nav button at the top left with a little arrow by it? And this should take you back to the first. Is that right?
Now on the second view controller you want to create a button that performs an action, but when you right-click-drag (ctrl-drag) onto a .h or .m file nothing happens?
If that's the case I've seen a few reasons for that. You might try:
You need to make a button, a label can only recieve actions, not create them. Read this article on IBOutlet vs IBAction
Restart Xcode (I know, it's lame, but humor me)
Make sure you're dragging (if on the .h file) between "#interface" and "#end"
Make sure you're dragging (if on the .m file) between "#implementation" and "#end"
Do you have a custom view controller class for your second view? If so, select the second view controller in your storyboard and go to the identity inspector. Set the custom class to your custom view controller's class name. Now you will be able to control-drag IBOutlets and IBActions.
I am new to iOS programming and I am working on a project which will use both XIB files and storyboard.
I have two modules in it basically. First module is made from XIB files which also runs independently. I have made another module using storyboard and I had to integrate these two independently running modules. The screen of my first module which I want to connect to my storyboard is a subclass of UIViewController and I was able to do that with the help of stackoverflow (How to load a storyboard from a XIB file?) by creating an object of UIStoryBoard. Now my application is able to go to the storyboard but I can't come back to my first module which is made up of XIB files.
Please let me know how can I connect to the same instance of the last screen of the first module through which storyboard is called so that I can move back and forth through these views easily. Connecting to the same instance of the XIB file is important because it is a chat screen and when I come back to this screen, I would like to get back to the chat where I had left it and also when I come back to the storyboard (by clicking a button on the chat screen) I have a slider on the screen which should display the value which the user must have chosen when they were on this screen last time. I guess creating a new object should give me a new screen which won't work in this situation. This kind of mechanism works well within storyboard with the use of segue where we can define both source and destination view controller.
Please help me achieve the same in my situation.
Please also check the screen shots of the XIB file and the storyboard which I want connected.
Thanks.
Convert the nib files into storyboard, it will help you easier to manage your application.
Well in your case, what i see is from nibs is that there is a navigation controller in storyboard and also there will be a root view controller navigation controller from xib files.
Well the navigation controller stack has all VCs you pushed into and you can get back it in different ways.
I'm trying to develop an iPhone app that uses 4 views(View-based app), and I want to navigate from one view to the other. It would be ideal if for example the Submit ID button automatically sent a message to UIViewController to switch to View 2, and selecting a cell in View 2 would load View 3.
See a screenshot of the Storyboard here.
I'm not sure how to do that, so I've tried using a separate button to switch between views, but that isn't working either and I can't figure out why.
You can have a look at the source code which I've uploaded to Dropbox.
First, I would suggest posting your code in your question. As appreciative as I'm sure other people are that you provided a dropbox link to the code, most people presumably have little interest in downloading the file to their computer, unzipping, and launching the project (me being one of them).
That being said, let's make sure you're clear on Storyboards and the general view controller hierarchy principles. You have, in your storyboard, four UIViewControllers dragged out into your workspace. So, you're not switching the views of a single UIViewController, telling it to switch from View1 to View2 to View3 and so on. You need to be telling the view controller hierarchy (which, in your case, probably needs to be managed by a UINavigationController), to push and/or pop view controller on and off its stack. It appears that you have some segues set up between your view controllers. Are you calling performSegueWithIdentifier:sender: in your code? Alternatively, you could hook up the Submit ID button to perform a push segue to View Controller 2 in much the same manner.
Once you have that working, you can override prepareForSegue:sender: to send information from ViewController1 to ViewController2 and so on.
I am building a view based application in xcode, and i am new to all the coding and stuff doing it now for 2 weeks. everything went great until i wanted to add a tab bar to by project.
I have searched the interwebz for this for a long time, but all that i could find was people explaining how you can add a tabbar to a window based application, Or how to build a tab bar with a tab bar application. Can someone please help me.
And there is one more thing, i don't want to add the tabbar to the first view. I have an application with some buttons, who take you to different views, and i want to add the tabbar to the fift view, so i can not build it in the app delegate i think.
I hope this explains my problem and i sure hope someone could help me.
thanks.
Start with a UITabBarController.
WHen you use it in Interface builder you can add UITabBarItems (the items to select).
You can link each TabBarItem to a certain NIB. Make your NIBs for every view you want to show. Set every TabBarItem class to the correct controller of your NIB files, these will be used as the file owner of that NIB.
So:
-Make a Main NIB
-Make NIBs for every controller and make the views.
-Make the controllers and link the controllers to the NIB.
-Implement the code.
Switching UITabBarItems will make automatically change the Controllers.
Here is a tutorial for this implementation: Tutorial
I have an application, say 'MyApp', which by default loads the view controller 'MyAppViewController' whenever the application launches. Later, I added a new view controller 'NewViewControler' to the project.
I now want the 'NewViewController' to be my default view controller which loads when the app launches.
Please let me know what changes I need to make in my project to achieve this.
Its easy, just:
Open your Storyboard
Click on the View Controller corresponding to the view that you want to be the initial view
Open the Attributes Inspector
Select the "Is Initial View Controller" check box in the View Controller section
Open MainWindow.xib and replace MyAppViewController with NewViewController.
In your app delegate class, replace the property for MyAppViewController with one for NewViewController. Connect NewViewController to its new outlet in Interface Builder.
In application:didFinishLaunchingWithOptions: add NewViewController's view to the window instead of MyAppViewController's view.
Most likely your main NIB file is still set to "MainWindow", check your *-Info.plist file.
If that's the case you can open the MainWindow.xib in Interface Builder. You should see a View Controller item. Bring up the inspector window and change the Class Identity to point to your new class. That should take care of instantiating your class.
As this feels like a "newbie" question (please pardon me if I'm mistaken) I would also highly recommend the following article:
iPhone Programming Fundamentals: Understanding View Controllers
Helped me understand the whole ViewController thing and the IB interaction..
As for me with xcode 4.3.3, all I had to do was simply replace all references of 'MyAppViewController' with 'NewViewController' in the AppDelegate h and m files.
Perhaps all the other steps have been taken out in the newer versions of xcode.
Hope this helps.