Suppose I was writing a game which involved a relatively complex geometric game board. Something like a dartboard.
I would want a view to display the game state. What is the best way to implement that view?
For example, should I draw the board off line in something like photoshop, add it as a resource, and then show it using a UIImageView? Or should I use drawing primitives and essentially draw the board programmatically?
What are the trade-offs?
If I do use an image, what format should I prefer? .png, .tiff, .gif, .jpg?
Thanks,
John
If you decide to go the image route you should use png. Displaying any other format you pay a performance hit (as mentioned in the comment).
To decide between building photoshop vs drawing via code you need to decide how much time you want to put into learning Quartz/CoreGraphics. Apple's docs:
http://developer.apple.com/library/mac/#documentation/GraphicsImaging/Conceptual/drawingwithquartz2d/Introduction/Introduction.html
If you already know Photoshop then building the graphic there is probably much easier, if you don't then learning Quartz is prob a less steep learning curve than Photoshop...
If it's a simple board, it's easy enough to draw it into the view, which gives you the possibility of easily manipulating it in interesting ways. Drawing in a view is done with a set of postscript like primitives.
For something more fancy, photoshop might be the way to go.
PNGs are preferred.
Related
well... I have searched for a while on topics of coding given GUI elements by designer in photoshop format. But I have a really hard time getting it together. Just for an example. When I would like to make an app with only a simple LCD-Display with a timer, counting down, how would I start there..... Don't get me wrong, I am aware of doing the code behind the scenes to make the timer count etc.
But what about setting up a nice looking gui with glossy display effect? What is a "correct way" to implement such a gui? Taking a Photoshop file showing a glossy display and setting a UILabel on that? or coding the gloss effect programmatically?
This is just one example... hm... I do not find good ressources for getting a start on such a topic. I would be really gladful if you could give me a helping hand for a start.
In the typical app development cycle, you would have the graphics people delivering graphics to the programming people, in the form of PNG files.
However, it is very well possible to render all kinds of things on the fly on the device. The blue shade on the tab bar icons in any app using UITabBarController is a clear example: the programmer puts in a PNG with just the alpha channel, and the system renders the blue shading.
Using Quartz Core (look for CGContext in the documentation) you can draw lines and text, and apply all kinds of transformations, gradients, clipping paths, etc. Using this you can create your own styled subclasses of UIView and such.
The PNG approach is generally the easier way.
I'm currently trying to write an app, that would be able to show the effects of glas, as seen through the iPhone Camera.
I'm not talking about simple, uniform glas but glass like this:
Now I already broke this into two problems:
1) Apply some Image Filter to the 2D-frames presented by the iPhone Camera. This has been done and seems possible, e.g. in the app: faceman
2) I need to get the individual lighting properties of a sheet of glas that my client supplies me with. Now basicly, there must be a way to read the information about how the glas distorts ands skews the image. I think It might be somehow possible to make a high-res picture of the plate of glasplate, laid on a checkerboard-image and somehow analyze this.
Now, I'm mostly searching for literature, weblinks on how you guys think I could start at 2. It doesn't need to be exact, in the end I just need something that looks approximately like the sheet of glass I want to show. And I'm don't even know where to search, Physics, Image Filtering or Comupational Photography books.
EDIT: I'm currently thinking, that one easy solution could be bump-mapping the texture on top of the camera-feed, I asked another question on this here.
You need to start with OpenGL. You want to effectively have a texture - similar to the one you've got above - displace the texture below it (the live camera view) to give the impression of depth and distortion. This is a 'non-trivial' problem, in that whilst it's a fairly standard problem in its field if you're coming from a background with no graphics or OpenGL experience you can expect a very steep learning curve.
So in short, the only way you can achieve this realistically on iOS is to use OpenGL, and that should be your starting point. Apple have a few guides on the matter, but you'll be better off looking elsewhere. There are some useful books such as the OpenGL ES 2.0 Programming Guide that can get you off on the right track, but where you start would depend on how comfortable you are with 3D graphics and C.
Just wanted to add that I solved this old answer using the refraction example in the Khronos OpenGl ES SDK.
Wrote a blog-entry with pictures about it :
simulating windows with refraction
I'm creating an interactive e-book for the iPad. This book will contain multiple pages that will consist of a lot of animations (frame and motion animations), transitions,... I was wondering what my development options are, should I use OpenGL, Quartz,...?
I've use UIImageView.animationImages before and found that it had really bad performance. What's the best way to draw frame based animations?
Does anybody have some good pointers to resources on this?
thanks in advance,
Thomas
I guess that depends a bit on what you'll be drawing. If you have a need for 3D, then OpenGL is the way to go, but it doesn't sound like it. I have a feeling Quartz2D is going to be just fine for your 2D drawing needs. I've done drawing with both and they have a very similar API. I think the downside of using all the raw power of OpenGL is that you have then signed up for doing most of the work yourself. I don't recommend attempting to using Core Animation high level APIs to manipulate OpenGL views.
If you do use Quartz2D and "normal" UIViews instead of OpenGL/EAGLView, then you can take advantage the many pre-canned animations Apple already build with Core Animation. This include the card flip left/right, resizing, moving (x/y translation), rotation and the ever popular e-book page curl.
The best example of iBook like custom page curl functionality I could find is this example code from High Caffeine Content. However, you don't have to bring that much math to the table if you just want to use the out of the box Core Animation stuff. The bad performance you may have encountered could have been due to anything, including older/slower hardware. They have revved the graphics chips on the new devices.
I have to develop an application "Behavior like an Tetris game".
I have never used "OpenGL" for the iPhone application developement.
Application is something like this
Red / green / blue square boxes drop from top
Red + Red + Red = Points & boxes disappears
same way user has to make combination & get points
Different levels are there.
There are three buttons Left, Right for movement & bottom for speedy fall
For this kind of application should I use open GL or NOT?
i.e. Is it possible to develop entire application with view & it's animation?
If yes then, will it be more complex as compare to open gl?
What is the advantage of using open GL?
(I know that it gives good 2d, 3d look )
(But here my question means - easy coding?)
(Or open gl is more complicated as compare to objective-c?)
(I am just asking because I am not aware of it)
Basically your options are:
Using OpenGL
Using Quartz
Using UIKit
OpenGL is a fairly complicated beast, but is by far the best way to squeeze performance out of the iPhone. Do you need it for a Tetris game, though? Almost certainly not.
Quartz is the toolkit used in Mac OS X and the iPhone to draw images and do image effects. Because I come from an OpenGL background in other languages, I find Quartz strange and frustrating. However, it is probably easier for someone who is new to both.
You can do everything here using UIKit, and it will definitely be much much easier than other options. The main disadvantage is that it's rather slow in comparison, but once again doing a Tetris-like game shouldn't matter at all.
Before you go with UIKit, though, I recommend just checking out something like Cocos 2D, which will give you the advantages of OpenGL without the headache of dealing with all of its inner workings.
From the tone of your question it looks like you're confusing what OpenGL is and isn't with regard to Objective-C.
OpenGL is a library written in the C programming language (to put it simplistically) that excels at rendering shapes (especially 3D shapes) for display on a screen. It doesn't replace Objective-C inside your program, it merely assists you in drawing the shapes. If you don't use OpenGL, you'll need to write some sort of drawing/rendering code in your NSView (or subclass) to render the blocks. By using OpenGL, you will be provided a lot of helpful C methods for drawing shapes, which otherwise you'll have to implement yourself. On top of that OpenGL has thousands of man hours worth of drawing optimizations that you can take advantage of if you use it rather than trying to implement shape rendering yourself.
Having said that, OpenGL isn't all sunshine and roses. It works like a state machine and has its own assumptions about the way it will be used (like any API). Just because you know C and Objective-C doesn't mean that using OpenGL will be trivial. If you've never written any OpenGL code, I suggest you look into a reference like the venerable Red Book.
The thing to keep in mind is that OpenGL is not a language until itself (ignoring the OpenGL shading language). Its merely a set of C functions to aid you in rendering graphics.
You may well want to ask as well on http://iphonegamedev.stackexchange.com/, the new Stack Overflow variant just for iPhone gaming.
To learn & understand what you need.
Please go through following link.
it includes all necessary links for all kind of resources that you needed.
http://maniacdev.com/2009/04/8-great-resources-for-learning-iphone-opengl-es/
Edit :
After reading your question properly ( actually my question - By r & d I found solution).
I think - you need to develop a 2d application.
Go for the following link. Best option for 2d animation.
http://code.google.com/p/cocos2d-iphone/
Don't forget to visit following link, if you needed sample codes.
http://monoclestudios.com/cocos2d_whitepaper.html
I'm writing a game that displays 56 hexagon pieces filling the screen in the shape of a board. I'm currently drawing each piece using a singleton rendering class that when called to draw a piece, creates a path from 6 points based of the coordinate passed in. This path is filled with a solid color and then a 59x59 png with an alpha to white gradient is overlayed over the drawing to give the piece a shiny look. Note I'm currently doing this in Core Graphics.
My first thought is that creating a path everytime I draw is costly and seems like I can somehow do this once and then reuse it, but I'm not sure of the best approach for this. When I look at the bottlenecks with Shark, it looks like the drawing of the png is the most taxing part of the process. I've tried just rendering the png overlay or just rendering the path without the overlay and both give me some frame gains, although removing the png overlay yields the most frames.
My current thought is that at startup, I should render 6 paths (1 for each color piece I have) and overlay them with the png and then store an image of these pieces and then just redraw the pieces each time I need them. Is there an effecient machanism for storing something you've drawn once and redrawing it? It kinda just sounds like I'd be running into the whole drawing pngs too often thing again, but maybe there's a less taxing method that does a similar thing...
Any suggestions are much appreciated.
Thanks!
You might try CGLayer or CALayer.
General thoughts:
Game programming on iPhone usually necessitates OpenGL. Core Graphics is a bit easier to work with, but OpenGL is optimized for speed.
Prerender this "shiny look" into the textures as much as is possible (as in: do it in Photoshop before you even insert them into your project). Alpha blending is hell on performance.
Maybe try PVRTC (also this tutorial) as it's a format used by iPhone's GPU's manufacturer. Then again, this could make things worse depending on where your bottleneck is.
If you really need speed you have to go the OpenGL route. Be careful if you want to mix OpenGL and Core Animation, they can conflict.
OpenGL is a pain if you haven't done much with it. It sounds like you could use Core Animation and make each tile a layer. CA doesn't call the redraw again unless you change something, so you should be able to just move that layer around without taking a big hit. Also note that CA stores the layer in the texture memory so it should be much faster.
Some others have mentioned that you should use OpenGL. Here's a nice introduction specifically for the iPhone: OpenGL ES from the Ground Up: Table of Contents
You might also want to look at cocos2d. It seems to be significantly faster than using CoreAnimation in my tests, and provides lots of useful stuff for games.