I'm using Beyond compare to Diff HTML/PHP files between a windows PC and a Linux box. I want to compare file contents.
I can't figure out how to get it to ignore white space (line spaces or space at the start/end of lines).
I'm sure this should be doable, right?
Try setting your file format and turning on the Ignore Unimportant Differences option:
http://www.scootersoftware.com/vbulletin/showthread.php?t=4067
If that doesn't work for you you might want to take a look at WinMerge as a free alternative: http://winmerge.org/
Related
So recently I decided to not use the standard markers that Matlab provides and use my own via: a set of fonts including Webdings or WingDings. I make a standard scatter plot, and plot the text (in wingdings), using the text command, over the locations of the markers.
When I save these plots as png files, they print perfectly. They also appear perfectly on my screen after plotting.
However when I save these plots as eps files, the webdings are turning into their original letters 'l' or 'w'. It also looks like it's plotting them in a Courier font, but my default is Helvetica.
I've read through this previous post, but my question differs in that he is looking to use Latex as the interpreter and to include fonts, whereas I don't want to use Latex as the interpreter. However, it seems like my default interpreter (not sure what that is), isn't doing the job when converting to EPS.
Example:
imageR='w'
text(xf2,yf2,imageR,'fontName',font,'FontSize',fontR,'HorizontalAl','left','color','w')
I figured it out....took me way too long.
Ghostscript / Postscript only export with a few fonts when you are exporting eps files.
This link was incredibly helpful.
I just switched from wingdings/webdings to ZapfDinbats...Practically the same thing...
use Microsoft Word to edit an equation with underbrace. The line is as follows:
\underbrace(ab+cdf-edf=9dc/ereat+asdfdgg-asfeefe-eafdgahty+atataeaattrat)
The problem is the symbol for underbrace is very flat, looking like a line with the downward pointing part too small to see. Is there a way to make it larger (e.g., is there a way to stretch the underbrace VERTICALLY)? The size of underbrace is set automatically in Latex and looks fine. But in Microsoft Word, the default just does not look especially when you have a long equation. I am not sure if there is a setting allowing you to change it. Many thanks! Gene
I am attempting to make a very simple label using Libreoffice Draw v 4.0.2.2. The label has not much more to it than regularly spaced lines of centered text
This image will be printed, and I have a fixed size/ppi requirement to ensure appropriate print quality.
I set the page size to my specs, and layout the text as I desire. The print shop takes several image formats including .tiff and .png. When I export the image, a dialog pops up that asks for the image size/ resolution. The given ppi is very low (~40) and I require a minimum of 180ppi. When I enter this, the image size adjusts itself and results in an image that is far too small.
The only solution that appears to be viable is to explode the page size and the drawing text size so it gets shrunk upon export. This is a very imprecise and illogical feature (bug?) of the program that I really wish is a result of my ignorance.
I found a thread in the mailing list which describes this issue exactly. The only answer that is given is essentially "yes, this is ridiculous and doesn't help anybody".
Can anyone give some advice to this? Or at least shed some light on who might need this "feature"?
There is something off about the Export tool of LibreOffice in general. It has been years since it is broken. Taking a screenshot is an alternative, but obviously you cannot control the resolution.
So, a better work around is exporting to SVG, and then convert the SVG to PNG with Inkscape. Once downloaded, convert the file with the following command:
inkscape -z -e out.png -w 1024 in.svg
If you are in Windows (x64), you will need to indicate the full path:
"C:/Program Files/Inkscape/inkscape.exe" -z -e out.png -w 1024 in.svg
If you install the 32 bit version, this should work:
"C:\Program Files (x86)/Inkscape/inkscape.exe" -z -e out.png -w 1024 in.svg
This can be done from inside Libre Office, there is no need to use any external tool. The Export dialog is very confusing, yes; you have to realize that both size and resolution can be set independently.
Select File -> Export -> choose the desired format. The export dialog should appear.
TAKE NOTE of Width and Height. Set the desired resolution; notice how Width and Height change (?). Don't worry, restore Width and Height to your saved values. And that's it. You get a high resolution image with the desired size and DPI.
Libre Draw (the one I'm using anyway) is a vector drawing app - have you asked the print shop if they can use vector formats like eps, pdf? Most should be able to in my experience. Then resolution becomes irrelevant.
-Terry
According to the MATLAB manual, when you save a figure using print or by choosing file|save, if you choose the painters renderer and save to PDF or EPS vector formats, all fonts get substituted. Is there a way to get around this limitation?
Whenever I output a figure, whether I use print or export_fig, the fonts get substituted, and so they no longer match the fonts in the document that I plan on putting the figure into. I would prefer to keep them in a vector format, because I use LaTeX and so I want to be able to use the same figures in my documents as in my beamer presentations and have them scale nicely without bloating the file size.
If I'm reading that link correctly, not all fonts get substituted. From 'Choosing a Printer Driver':
The table below lists the fonts supported by the MATLAB PostScript and Ghostscript drivers when generated with the Painters renderer (fully vectorized output). This same set of fonts is supported on both Windows and UNIX:
AvantGarde
Helvetica-Narrow
Times-Roman
Bookman
NewCenturySchlbk
ZapfChancery
Courier
Palatino
ZapfDingbats
Helvetica
Symbol
So, if you use one of the above fonts, the output vector-format figure should maintain the correct font. See for example:
list_fonts = listfonts
figure('renderer','painters'),
plot(peaks),
xlabel('this font is Helvetica','fontname','Helvetica','fontsize',24)
set(gcf,'paperpositionmode','auto')
print(gcf,'-depsc2','test1.eps')
Which produces:
So, choose one of the fonts from the list above, and the font will be output correctly. Otherwise, change the font in your presentation to match one of the above fonts.
I also encountered this problem for many times, and I have an simple but effective way that never fails me (on Windows, need GSview).
1) save fig as PDF
2) save PDF as ps
3) open ps with GSview, then click "File->PS to EPS", specify a file name and done.
Hope this helps.
I'm looking for a font which contains a graphic character which is (essentially), the space character, inverted. I'm looking for a graphic character equivalent to the largest-possible solid-black box. The closest I have been able to find is Wingings 2 character 162, but that doesn't fill the entire available character space. When I insert two consecutive Wingdings 2 162 characters, there is still appreciable whitespace between them when displayed or printed. Does anyone know of a black-box font/character which would fill all available character space?
All characters are going to have whitespace between them, or they would be unreadable. This is called "kerning". You can adjust the kerning and line-height in whatever program you are using to send the malicious fax, if you want to be sure to use the maximum amount of toner per page.
Have you considered creating your own font using a software package like this or like this? You could edit the space character to be a solid black square. But as Chris McCall mentioned, you may still have space between characters of any size due to kerning applied by the layout engine that draws the fonts.
You other option is to owner draw your own text and programmatically replacing spaces with black boxes. You would have complete control over kerning and everything else.
I don't know if this is exactly what you were looking for, but...
I was looking for the same thing, since I wanted to create a "textbox" when I wanted to write text using the spritefont, but I never knew how long the total string was going to be, so I wanted something that I could "write" in the same location right before the string with a contrasting color which could be expected to be as long as the string it needed to encompass. That being the case, try:
Webdings - character 103.
I tried lining them up and there wasn't even any space in between. Perfect.