Does anyone know of any good tutorials for the following please?
Im new to Xcode and dont know where to start with this.
I have a ViewController that is the root View and has 6 navigation buttons (UIButton) on it. Depending on which button that is clicked, the user will see a sub-navigation View of that section with further button options on it.
So e.g top level will have buttons Where to Eat, What to Do...
Then clicking on Where to Eat will show Restaurants, Fast Food ....etc
I would like to do this programatically. I can do it using Storyboards and using multiple views, but it gets very messy as there are a lot of views on the screen eventually.
I have followed a tutorial HERE on how it is done for TableViewControllers, but I need something similar for buttons.
Im not sure what this function is called - have been searching for sub-navigation for the last while but nothing matches what I need to accomplish this.
Check out UIViewController's method presentViewController:animated:completion: method. It is available in iOS 5.0 and up. Let's say you have one of the button's linked to run the buttonOneActivated: method:
-(IBAction)buttonOneActivated:(id)sender
{
UISubViewController *subViewController = [[UISubViewController alloc] init];
[self presentViewController:subViewController
animated:YES
completion:NULL];
}
And in UISubViewController's implementation, let's say you have another button in order to return to the parent:
-(IBAction)returnToParent:(id)sender
{
[[self presentingViewController] dismissViewControllerAnimated:YES
completion:NULL];
}
I'm sure this has been asked countless times, and I've seen similar questions though the answer still eludes me.
I have an application with multiple view controllers and as a good view controller does its own task. However I find myself stuck in that I can't switch from one view controller to another. I've seen many people say "use a navigation controller" but this isn't what I want to use due to the unwanted view elements that are part and parcel to view controller.
I've done the following and have had limited success. The view controller is switched but the view does not load and I get an empty view instead:
- (IBAction)showLogin:(id)sender
{
PPLoginViewController *login = [[PPLoginViewController alloc] initWithNibName:#"PPLoginViewController" bundle:nil];
PPAppDelegate *appDelegate = [UIApplication sharedApplication].delegate;
appDelegate.window.rootViewController = login;
[self.view insertSubview:login.view atIndex:0];
}
Using UINavigationController as a rootViewController is a good tone of creating iOS application.
As i understand unwanted view elements is a navigationBar? You can just hide it manually, setting:
[self.navigationController setNavigationBarHidden:YES];
And about your case, if you want to change you current viewController(targeting iOS 6), you can just present new one:
[self presentViewController:login animated:YES completion:nil];
or add child (Here is nice example to add and remove a child):
[self addChildViewController:login];
Why to set UINavigationController as a root?
1) First of all it makes your application visible viewcontrollers to be well structured. (Especially it is needed on iPhone). You can always get the stack and pop (or move) to any viewController you want.
2) Why I make always make navigation as a root one, because it makes the application more supportable, so to it will cost not so many code changes to add some features to the app.
If you create one (root) viewcontroller with a lot of children, or which presents other viewcontrolls, it will make your code really difficult to support, and make something like gode-object.
Listen to George, UINavigationController is the way to go. Your reasons for not wanting to use it are not valid.
However, the reason your code doesn't work might have to do with the unnecessary line after setting the rootViewController to the login vc.
Per Apple's documentation, setting rootViewController automatically sets the window's view to the view controller's view.
I have a design question/technical question about my iPhone app.
I have a pretty simple (read really really simple) single view application. And it does everything that I need it to do. However I find myself in need of a help view. And I really don't quite know what to do!
I have a simple helpButton() method in my main view controller, and I really just want to display a scrollview with a bunch of images that show what to do during the use of my app. However, should I make a new viewcontroller class? How do I call it from my method?
Really I was thinking of an unfortunately simple method, just putting a scrollview behind everything and hiding it. Then showing it when the IBAction is called. Horrible...
Sorry if this is elementary, I haven't needed to do anything more yet!
You can push a modalViewController. To do that just make a new viewController with the scrollview and associated data in it, then
MyViewController *myViewController = [[MyViewController alloc] init];
[self presentModalViewController:myViewController animated:YES];
Create an IBAction in your new viewController and a hooked up button to that action to dismiss the modalView (something like this:
IBAction done {
[self dismissModalViewControllerAnimated:YES];
}
A couple options:
1) Create a new UIView object, either programmatically, or even in your existing XIB file. Use the [self.view addSubview:view] method to display it.
2) Create a new UIViewController with its own XIB file. Use [self presentModalViewController:anaimated:] to display it.
Either way, you'll need to add something to the new view to dismiss it when you're done.
I am working on an app that has several different views, two of the which are DetailViewController.h&.m and AddViewController.h&.m. Neither of these particular view have IB xib files associated with them, they just have programmatically generated UITableViews. These views essentially are the same, the only difference, is that in the AddViewController, you put info into cells, and in the DetailViewController that same info is viewable and editable. Essentially the viewDidLoad for the AddViewController overrides the DetailViewController viewDidLoad with different navigation bar items and title. MY QUESTION: Outside of IB, how do I reference which view I am in? I want to have some switches and buttons available in the DetailView, that I don't want available in the AddView. But being that as it is, they are refferencing the same info, and currently just changing the navigation bar items, they aren't seperate like I would like them to be. Inside the DetailView viewDidLoad I'm thinking I need something where its like
if(currentView = DetailView) {
self.view addSubview: onOffSwitch;
}
else onOffSwitch. hidden = YES;
Or something to that effect. Obviously if the above code actually worked, I wouldn't be writing this question :) Its probably just a syntax issue I can't hammer out, if you could please help me out, it would be greatly appreciated! Thanks
Well there is similar question here
But for your case you can do it like:
if([[self class] isKindOfClass:[DetailViewController class]]) {
self.view addSubview: onOffSwitch;
}
else
onOffSwitch. hidden = YES;
I've read numerous posts about people having problems with viewWillAppear when you do not create your view hierarchy just right. My problem is I can't figure out what that means.
If I create a RootViewController and call addSubView on that controller, I would expect the added view(s) to be wired up for viewWillAppear events.
Does anyone have an example of a complex programmatic view hierarchy that successfully receives viewWillAppear events at every level?
Apple's Docs state:
Warning: If the view belonging to a view controller is added to a view hierarchy directly, the view controller will not receive this message. If you insert or add a view to the view hierarchy, and it has a view controller, you should send the associated view controller this message directly. Failing to send the view controller this message will prevent any associated animation from being displayed.
The problem is that they don't describe how to do this. What does "directly" mean? How do you "indirectly" add a view?
I am fairly new to Cocoa and iPhone so it would be nice if there were useful examples from Apple besides the basic Hello World crap.
If you use a navigation controller and set its delegate, then the view{Will,Did}{Appear,Disappear} methods are not invoked.
You need to use the navigation controller delegate methods instead:
navigationController:willShowViewController:animated:
navigationController:didShowViewController:animated:
I've run into this same problem. Just send a viewWillAppear message to your view controller before you add it as a subview. (There is one BOOL parameter which tells the view controller if it's being animated to appear or not.)
[myViewController viewWillAppear:NO];
Look at RootViewController.m in the Metronome example.
(I actually found Apple's example projects great. There's a LOT more than HelloWorld ;)
I finally found a solution for this THAT WORKS!
UINavigationControllerDelegate
I think the gist of it is to set your nav control's delegate to the viewcontroller it is in, and implement UINavigationControllerDelegate and it's two methods. Brilliant! I'm so excited i finally found a solution!
Thanks iOS 13.
ViewWillDisappear, ViewDidDisappear, ViewWillAppear and
ViewDidAppear won't get called on a presenting view controller on
iOS 13 which uses a new modal presentation that doesn't cover the
whole screen.
Credits are going to Arek Holko. He really saved my day.
I just had the same issue. In my application I have 2 navigation controllers and pushing the same view controller in each of them worked in one case and not in the other. I mean that when pushing the exact same view controller in the first UINavigationController, viewWillAppear was called but not when pushed in the second navigation controller.
Then I came across this post UINavigationController should call viewWillAppear/viewWillDisappear methods
And realized that my second navigation controller did redefine viewWillAppear. Screening the code showed that I was not calling
[super viewWillAppear:animated];
I added it and it worked !
The documentation says:
If you override this method, you must call super at some point in your implementation.
I've been using a navigation controller. When I want to either descend to another level of data or show my custom view I use the following:
[self.navigationController pushViewController:<view> animated:<BOOL>];
When I do this, I do get the viewWillAppear function to fire. I suppose this qualifies as "indirect" because I'm not calling the actual addSubView method myself. I don't know if this is 100% applicable to your application since I can't tell if you're using a navigation controller, but maybe it will provide a clue.
Firstly, the tab bar should be at the root level, ie, added to the window, as stated in the Apple documentation. This is key for correct behavior.
Secondly, you can use UITabBarDelegate / UINavigationBarDelegate to forward the notifications on manually, but I found that to get the whole hierarchy of view calls to work correctly, all I had to do was manually call
[tabBarController viewWillAppear:NO];
[tabBarController viewDidAppear:NO];
and
[navBarController viewWillAppear:NO];
[navBarController viewDidAppear:NO];
.. just ONCE before setting up the view controllers on the respective controller (right after allocation). From then on, it correctly called these methods on its child view controllers.
My hierarchy is like this:
window
UITabBarController (subclass of)
UIViewController (subclass of) // <-- manually calls [navController viewWill/DidAppear
UINavigationController (subclass of)
UIViewController (subclass of) // <-- still receives viewWill/Did..etc all the way down from a tab switch at the top of the chain without needing to use ANY delegate methods
Just calling the mentioned methods on the tab/nav controller the first time ensured that ALL the events were forwarded correctly. It stopped me needing to call them manually from the UINavigationBarDelegate / UITabBarControllerDelegate methods.
Sidenote:
Curiously, when it didn't work, the private method
- (void)transitionFromViewController:(UIViewController*)aFromViewController toViewController:(UIViewController*)aToViewController
.. which you can see from the callstack on a working implementation, usually calls the viewWill/Did.. methods but didn't until I performed the above (even though it was called).
I think it is VERY important that the UITabBarController is at window level though and the documents seem to back this up.
Hope that was clear(ish), happy to answer further questions.
As no answer is accepted and people (like I did) land here I give my variation. Though I am not sure that was the original problem. When the navigation controller is added as a subview to a another view you must call the viewWillAppear/Dissappear etc. methods yourself like this:
- (void) viewWillAppear:(BOOL)animated
{
[super viewWillAppear:animated];
[subNavCntlr viewWillAppear:animated];
}
- (void) viewWillDisappear:(BOOL)animated
{
[super viewWillDisappear:animated];
[subNavCntlr viewWillDisappear:animated];
}
Just to make the example complete. This code appears in my ViewController where I created and added the the navigation controller into a view that I placed on the view.
- (void)viewDidLoad {
// This is the root View Controller
rootTable *rootTableController = [[rootTable alloc]
initWithStyle:UITableViewStyleGrouped];
subNavCntlr = [[UINavigationController alloc]
initWithRootViewController:rootTableController];
[rootTableController release];
subNavCntlr.view.frame = subNavContainer.bounds;
[subNavContainer addSubview:subNavCntlr.view];
[super viewDidLoad];
}
the .h looks like this
#interface navTestViewController : UIViewController <UINavigationControllerDelegate> {
IBOutlet UIView *subNavContainer;
UINavigationController *subNavCntlr;
}
#end
In the nib file I have the view and below this view I have a label a image and the container (another view) where i put the controller in. Here is how it looks. I had to scramble some things as this was work for a client.
Views are added "directly" by calling [view addSubview:subview].
Views are added "indirectly" by methods such as tab bars or nav bars that swap subviews.
Any time you call [view addSubview:subviewController.view], you should then call [subviewController viewWillAppear:NO] (or YES as your case may be).
I had this problem when I implemented my own custom root-view management system for a subscreen in a game. Manually adding the call to viewWillAppear cured my problem.
Correct way to do this is using UIViewController containment api.
- (void)viewDidLoad {
[super viewDidLoad];
// Do any additional setup after loading the view.
UIViewController *viewController = ...;
[self addChildViewController:viewController];
[self.view addSubview:viewController.view];
[viewController didMoveToParentViewController:self];
}
I use this code for push and pop view controllers:
push:
[self.navigationController pushViewController:detaiViewController animated:YES];
[detailNewsViewController viewWillAppear:YES];
pop:
[[self.navigationController popViewControllerAnimated:YES] viewWillAppear:YES];
.. and it works fine for me.
A very common mistake is as follows.
You have one view, UIView* a, and another one, UIView* b.
You add b to a as a subview.
If you try to call viewWillAppear in b, it will never be fired, because it is a subview of a
iOS 13 bit my app in the butt here. If you've noticed behavior change as of iOS 13 just set the following before you push it:
yourVC.modalPresentationStyle = UIModalPresentationFullScreen;
You may also need to set it in your .storyboard in the Attributes inspector (set Presentation to Full Screen).
This will make your app behave as it did in prior versions of iOS.
I'm not 100% sure on this, but I think that adding a view to the view hierarchy directly means calling -addSubview: on the view controller's view (e.g., [viewController.view addSubview:anotherViewController.view]) instead of pushing a new view controller onto the navigation controller's stack.
I think that adding a subview doesn't necessarily mean that the view will appear, so there is not an automatic call to the class's method that it will
I think what they mean "directly" is by hooking things up just the same way as the xcode "Navigation Application" template does, which sets the UINavigationController as the sole subview of the application's UIWindow.
Using that template is the only way I've been able to get the Will/Did/Appear/Disappear methods called on the object ViewControllers upon push/pops of those controllers in the UINavigationController. None of the other solutions in the answers here worked for me, including implementing them in the RootController and passing them through to the (child) NavigationController. Those functions (will/did/appear/disappear) were only called in my RootController upon showing/hiding the top-level VCs, my "login" and navigationVCs, not the sub-VCs in the navigation controller, so I had no opportunity to "pass them through" to the Nav VC.
I ended up using the UINavigationController's delegate functionality to look for the particular transitions that required follow-up functionality in my app, and that works, but it requires a bit more work in order to get both the disappear and appear functionality "simulated".
Also it's a matter of principle to get it to work after banging my head against this problem for hours today. Any working code snippets using a custom RootController and a child navigation VC would be much appreciated.
In case this helps anyone. I had a similar problem where my ViewWillAppear is not firing on a UITableViewController. After a lot of playing around, I realized that the problem was that the UINavigationController that is controlling my UITableView is not on the root view. Once I fix that, it is now working like a champ.
I just had this problem myself and it took me 3 full hours (2 of which googling) to fix it.
What turned out to help was to simply delete the app from the device/simulator, clean and then run again.
Hope that helps
[self.navigationController setDelegate:self];
Set the delegate to the root view controller.
In my case problem was with custom transition animation.
When set modalPresentationStyle = .custom viewWillAppear not called
in custom transition animation class need call methods:
beginAppearanceTransition and endAppearanceTransition
For Swift. First create the protocol to call what you wanted to call in viewWillAppear
protocol MyViewWillAppearProtocol{func myViewWillAppear()}
Second, create the class
class ForceUpdateOnViewAppear: NSObject, UINavigationControllerDelegate {
func navigationController(_ navigationController: UINavigationController, willShow viewController: UIViewController, animated: Bool){
if let updatedCntllr: MyViewWillAppearProtocol = viewController as? MyViewWillAppearProtocol{
updatedCntllr.myViewWillAppear()
}
}
}
Third, make the instance of ForceUpdateOnViewAppear to be the member of the appropriate class that have the access to the Navigation Controller and exists as long as Navigation controller exists. It may be for example the root view controller of the navigation controller or the class that creates or present it. Then assign the instance of ForceUpdateOnViewAppear to the Navigation Controller delegate property as early as possible.
In my case that was just a weird bug on the ios 12.1 emulator. Disappeared after launching on real device.
I have created a class that solves this problem.
Just set it as a delegate of your navigation controller, and implement simple one or two methods in your view controller - that will get called when the view is about to be shown or has been shown via NavigationController
Here's the GIST showing the code
ViewWillAppear is an override method of UIViewController class so adding a subView will not call viewWillAppear, but when you present, push , pop, show , setFront Or popToRootViewController from a viewController then viewWillAppear for presented viewController will get called.
My issue was that viewWillAppear was not called when unwinding from a segue. The answer was to put a call to viewWillAppear(true) in the unwind segue in the View Controller that you segueing back to
#IBAction func unwind(for unwindSegue: UIStoryboardSegue, ViewController subsequentVC: Any) {
viewWillAppear(true)
}
I'm not sure this is the same problem that I solved.
In some occasions, method doesn't executed with normal way such as "[self methodOne]".
Try
- (void)viewWillAppear:(BOOL)animated
{
[self performSelector:#selector(methodOne)
withObject:nil afterDelay:0];
}
You should only have 1 UIViewController active at any time. Any subviews you want to manipulate should be exactly that - subVIEWS - i.e. UIView.
I use a simlple technique for managing my view hierarchy and have yet to run into a problem since I started doing things this way. There are 2 key points:
a single UIViewController should be used to manage "a screen's worth"
of your app
use UINavigationController for changing views
What do I mean by "a screen's worth"? It's a bit vague on purpose, but generally it's a feature or section of your app. If you've got a few screens with the same background image but different overlays/popups etc., that should be 1 view controller and several child views. You should never find yourself working with 2 view controllers. Note you can still instantiate a UIView in one view controller and add it as a subview of another view controller if you want certain areas of the screen to be shown in multiple view controllers.
As for UINavigationController - this is your best friend! Turn off the navigation bar and specify NO for animated, and you have an excellent way of switching screens on demand. You can push and pop view controllers if they're in a hierarchy, or you can prepare an array of view controllers (including an array containing a single VC) and set it to be the view stack using setViewControllers. This gives you total freedom to change VC's, while gaining all the advantages of working within Apple's expected model and getting all events etc. fired properly.
Here's what I do every time when I start an app:
start from a window-based app
add a UINavigationController as the window's rootViewController
add whatever I want my first UIViewController to be as the rootViewController of the nav
controller
(note starting from window-based is just a personal preference - I like to construct things myself so I know exactly how they are built. It should work fine with view-based template)
All events fire correctly and basically life is good. You can then spend all your time writing the important bits of your app and not messing about trying to manually hack view hierarchies into shape.