In short I'm trying to browse a Mac's web site on the local wifi network under a .local hostname that is not the same as the machine's 'computer name' and think I'm missing a setup step.
I have a local install of nginx on my Macbook, with the proper /etc/hosts and nginx.conf entries to serve multiple sites, each with their own distinct local hostname. Assume the Macbook's network name is computername.local, and I have 2 sites running, one at http://computername.local and another at http://servicename.local. I can access each of these sites just fine from the local machine, but also want to be able to access http://servicename.local from an iPhone on the same WiFi network. I'm getting a timeout for that URL, but the other one works just fine.
I'm guessing something has to be done to allow servicename.local to be used on the local network, which I've left out. What is required to do that? Do I need to use Bonjour for that? Where would I add this new local hostname?
Another Mac on the same network can access this one under servicename.local just fine if I define the IP in its /etc/hosts file too, but I can't modify that file on the iPhone obviously. It's not jailbroken, and I'm not really interested in doing that just to get this working.
Not sure if it will help the OP, but another way of doing this - besides running a DNS server or jailbreaking the phone - is to run an HTTP proxy on the Mac, and configure the iPhone to use the proxy. Then the iPhone will pick up the Mac's local hosts file entries because it resolves DNS queries through the proxy. I've blogged about how to do this using the free Mac proxy "SquidMan" here: http://egalo.com/99j
Related
How can i host a website through my computer using server softwares?
I tried to host a website through my own computer using apache tomcat server but it didnt work ( please briefly explain every point )
The main issue that you need to deal with is getting the clients to your computer.
Yes, it is possible and yes I have done it, albeit a while ago.
You need to see if you can browse to your computers website from another device on your network, this will ensure that apache is working. Try another computer/laptop/tablet/whatever to see if this site reachable by other computers using the IP Address and possibly port number. If you cannot get to the site, there are settings in apache to deny certain ip's, google it to get the exact steps for your version. If it works, move on to step 2.
You will need a static IP Address to ensure that all further steps stay working, google this if you are not sure how to do it
You need to have the external IP address of your router(whatsmyip.org) or use Dynamic DNS to route traffic from an address to your ip and there are services that allow this. I can recommend no-ip.com - This is all assuming that you have access to the router.
You would be required to set up port forwarding on your router. This will direct the internet traffic to your computer. You will need to get the exact instructions for your specific model of router.
Please be aware that you need to have proper firewalls and systems in place to prevent attacks. I am sure that you are just testing at this point though...
All the best!
For my development process I need to access a webserver which is behind a VPN and has no DNS entry.
What I was doing on 4.x was to edit /etc/hosts on the iPhone, and add it to the hosts file.
Now I'm on 5.0 beta, and don't want to jailbreak for now just for this purpose.
Is there a way I can add a line to /etc/hosts, just for development purposes (the final, distribution application does not need this hack), without jailbreaking? Can I use other means (declare a fake DNS entry by some unknown means at application launch, for example)?
EDIT: If you're willing to purchase a small license, I recommend using Charles Proxy, a web debugging proxy tool. It will also resolve domains from your local /etc/hosts, and it gives a lot of bonus features (i.e. inspect requests/responses and throttle network speeds). I only stumbled upon this tool from a WWDC video and I'm not affiliated with the product at all. I recommend reading Chris Ching's tutorial for iPhone and Charles Proxy to get you started.
To add to Ramon's answer, a way around it is to setup your local computer as a DNS server and have your iPhone point to your computer as a DNS server. This would also work for Android devices as well
The instructions are for Mac OSX via Homebrew:
brew install dnsmasq
dnsmasq is a lightweight dns server that will fallback to the original DNS server when it encounters an unknown domain
Add the line address=/.your.domain.com/10.0.0.5 to the file /usr/local/etc/dnsmasq.conf
The IP Address 10.0.0.5 is whatever the IP address assigned to your local computer by your router. You can find this via Network Utility (if you want to be fancy, you can assign a static IP to your local computer in your router)
sudo dnsmasq
This starts dnsmasq process, and it will listen on the DNS ports
Assign your local computer and your router as your DNS servers for your computer via System Preferences -> Network -> Advanced -> DNS Tab
You'll have two entries, one for your local computer (127.0.0.1) and one for your router. The reason why you include your router's IP is dnsmasq will fulfill unknown entries through the other known DNS servers. Without the router entry, you're whatever devices connected to you dnsmasq won't know how to connect to the internet.
Set your local computer's IP Address as your DNS Server your iPhone, go to Settings -> Wi-Fi -> Info icon for your connected router -> DNS
Some things to consider:
If you shut down your machine, your iPhone won't connect to the internet anymore. Make sure to reset your iPhone's DNS server to your router's IP
By default dnsmasq will look at your /etc/hosts, so if you had pointed your.domain.com to 127.0.0.1, your iPhone will resolve your.domain.com to 127.0.0.1, which means you won't connect to anything. To change this behaviour edit uncomment the #no-hosts line in the dnsmasq config.
Sources
http://www.davesouth.org/stories/how-to-set-up-dnsmasq-on-snow-leopard-for-local-wildcard-domains
Set up a real DNS entry, either by setting up a local DNS server on your wireless network, or by using a dynamic DNS service, or by adding an A record to a domain you control DNS for.
You can also set up dnsmasq (available from macports/brew), it acts as a DNS forwarder which allows you to set all kinds of alternative records.
You can then set up the DNS on the iphone/ipad to point to the box running DNSmasq, and any host on /etc/hosts on the dnsmasq box will be returned first. If not found, dnsmasq will send the query to the upstream DNS.
Also you can add SRV records to dnsmasq.conf:
srv-host=_sip._udp.devel.foo.com,devel.foo.com,5070
And many other niceties.
I want to serve a website over an open wifi connection but I do not want this wifi connection to have access to the internet. Is this possible and how would I go about doing it.
I have setup websites locally and have gotten access in the browser through localhost or the IP address but I am not sure how I would go about setting up a webserver and serving the website via wifi.
Any insight on this?
you can access your machine's localhost via any computer easily, as long as that computer is connected to the said wifi.
get your computer name, and access it from other machine like this:
http://<your_computer_name_here:port_if_applicable>/website_folder_name
I do this to test my websites on mac and windows at home. My windows machine is called "The-Genius" and I access it via my mac like this:
http://The-Genius/Test/
which leads to the IIS.. if I want to access Apache, which is on port 78, I do this:
http://The-Genius:78/Test/
Hope it helps..
If you are using a wifi router, you don't have to do anything to get this to work. Whenever a client connects over wifi, they will be able to type in your webserver's IP address to see the website. If you want to use a DNS name then you might be able to set up the DNS names on the router itself.
Based on #LocustHorde's answer,
I tired the pc's IP address instead of using the pc name.
This worked fine for me...
http://172.168.1.21:8080/test/aa.php
I'm trying to test my iPhone application on the device.
I have a mac computer which stores my development environment.
Right now I can only access PHP files using the http://localhost/PHPFileLocation
which does not work when I try to test my app on real device.
How do I configure apache2 to be accessible from outside?
Is it possible to configure it to a specific IP address?
I want to reach some php scripts located on my development machine running apache2 from my iPhone device.
Thanks
If your computer has a WiFi card then you should be able to attach the iPhone remotely to a ad-hoc Wifi network created on your dev machine.
I'm assuming your Mac is behind a router. You should be able to configure your router to port forward connections to your WAN facing IP address to port 80 (the HTTP port) on your Mac - see http://portforward.com/ for some help.
You may also need to turn the firewall off on your Mac.
Once this is set up correctly you can hit http://yourexternalIP/PHPFileLocation in your iPhone app and this will be directed by your router to the Apache2 server on your Mac. The external IP is normally found on your router's admin page somewhere.
I want to create an iPhone app which makes calls to a web service. For testing, I want to first create the API calls on my mac (server running XAMPP) and if it works fine there I want to port it to the actual server.
If my iPhone and mac are on the same network, can I access the web service using the IP address of my mac?
Thanks.
Any time someone answers with "why not," ignore the post. This just takes up space and adds absolutely no value...their post imitating their life.
Anyway, I access my laptop localhost (WAMP stack) from my iPod Touch by entering the IP address of my laptop on my Touch location bar. There is some configuration that needs to happen for this to work. I found what I needed at:
http://www.frihost.com/forums/vt-88381.html
Good Luck!
I can not speak about actual development, however I access intranet pages from a Ipod Touch all the time by either typing http ://ip or http://local_dns_name
As long as the iphone / ipod is on the network correctly (e.g. through standard wifi and not 3g/whatever) you should be able to access any and all local resources.
What I do:
Connected to the same network, I go in to the wireless settings and create a manual proxy that points to my machine. I use Charles proxy for testing a lot/seeing traffic, works like a charm and it lets me use my macbook hosts file so I don't need to do any funky listening rules in apache - just the same vhost settings I use on my machine already.
http://www.charlesproxy.com/documentation/faqs/using-charles-from-an-iphone/
Why not?
Have you tried it and have some problems?