I'm new to iPhone development, its going OK so far, I've managed to get to grips with the Tab bar, navigation bar and tableviews.
However I want to be able to copy what the settings app does on the device when a user wants to change language.
In Settings, General, International when a user clicks on Language a new screen animates over the previous screen with a navigation bar that has a cancel and done button and a table view showing the languages available for selection.
I cant seem to find how to do this via Google so I was wondering if someone could point me in the right direction of a tutorial or what I should be searching for? Is it type of view or a certain way to animate a view?
This is done via a method available on UIViewController (and thus all of its derivatives as well) called - presentModalViewController:animated:. You simply need to create a new view controller that you want to display and pass it into that.
See the link to the UIViewController docs above for more info and the complementary method - dismissModalViewControllerAnimated: to close the view. The docs have links to example code on how to use them as well.
in iPhone, it's done through modal view controller. Refer this tutorial.
Related
Hy everybody
I am a newbie ios programmer and I'm facing many doubts when I must switch the pages of my app.
With the term "page" I mean a UIView that fills the whole screen with some widgets (buttons, textboxes. tables..)
As far as I have understood what I've read I should use an UIViewController to manage each of these pages
since each page should be a screen’s worth of content.
My App starts with a ViewScroller with many buttons and when the user clicks one of these it opens a new page.
The first page is the UIView connected to the RootController Of the Window.
So far to open the new pages I add a child controller to the RootController and it's view as a child of the view of the RootController:
RicLocaliController = [[RicercaLocaliViewController alloc] initWithNibName:#"RicercaLocaliViewController" bundle:nil];
[self addChildViewController:RicLocaliController];
[RicLocaliController didMoveToParentViewController:self];
[self.view addSubview:RicLocaliController.view];
RicLocaliController.view.frame = self.view.bounds;
When the user clicks the "Back" Button I remove the child controller and the child view.
Going down this road I would get a dynamic tree of Controllers with their Views.
So far I have not encountered problems and my app can go up to a third level in the tree and come back. Each page behaves correctly when orientation changes.
But I'm afraid that adding, for each subpage, a child controller and a child view could be not the right thing to do.
I'm afraid that if I nest a lot of pages when the orientation changes the app could respond slowly since also the superviews will do something to manage this event.
So what I wonder is if what I am doing is completely senseless, if I should use Navigation controllers or some other way to manage my page changes.
Unfortunately my boss is not giving me enough time to study well the subject and so I would like an advice to follow the best solution possibly using the most standard and less complex component offered by the framework instead of the newest features.
I read a lot of web pages on the subject but it seems to me that there are many ways to manage the navigation beetwen pages and this makes me confused.
I apologize for my bad english but i'm tired and English it's not my first language.
You HAVE to do some studying. You will spend more time clearing up all your problems later otherwise... but, here are some tips.
Using nested ViewControllers leads to all kinds of trouble so if you are short of time, skip that.
Think of each "Page" as one ViewController. A ViewController has a property called View but that is actually just the top view of a whole hierarchy of views. A view is the base class for any visual object, like labels, buttons etc. All views can have subviews, so you can add an image under a label etc. and do really wierd stuff if you want to. I am just saying this to free your mind about how you can use views.
Now, ViewControllers are supposed to hold to code to ONE view hierarchy. That view hierarchy is for that View Controller only.
When the user wants to navigate to another page, you have a few alternatives:
NavigationViewController - that should be used when the user wants to delve down into data, like opening a detailed view of an item in a list etc. The NavigationViewController gives you help with back buttons, proper animation etc. You "pop" a viewcontroller to go back one level. If the user click the back-button, this is automatic.
TabBarViewController - use that if you want a tab bar at the bottom of the screen. Each tab is connected to a ViewController, that has it's own view hierarchy.
PushModal - If you are in a ViewController and just needs to get some data from the user, which is not part of the normal navigation of the app, you can push a new ViewController modally. This is the way you interact with iOS built in ViewControllers. This is also a good way to get a value back from the view controller.
There you have it. Go learn more. :)
It sounds like, for what you are using, you should be using a navigation controller. This will automatically handle pushing views onto the stack and then popping them off again later. This will also automatically create a back button (it is customizable) in the navigation bar.
If you are using iOS 5 or 6, I highly recommend trying out "storyboards" in Interface Builder. Storyboards allow you to graphically represent transitions (called "segues") between different views.
On top of being easier to design and implement, another advantage is that, if in the future you want to change the design of your application, you don't have to trawl through all your code and manually update each view connection.
I am making code for iPhone. My first screen has only one button with text Menu. When user will click on this button next screen is coming with multiple navigation bar.Each Navigation bar has their own Text information which are being selected after clicking on any Navigation bar.
How i should to design it for iPhone ? Please give me concept. Should i take multiple views ? If i have multiple views how will i hide and show on button click event ?
Thanks in advance.
You will have to adapt your user interface to comply to how Apple wants an app to work, look, and feel - or make your own custom viewcontrollers. Even then, you might not get the exact behavior you want.
My hottest tip is to look at similar apps on appstore and see how they are navigated.
I don't get a picture in my mind from your description, but it seems you want what is called "drill down". This is best done with tableViews.
You can't have multiple navigation controllers on the same "screen"; it doesn't work like that on the iPhone. Instead, what you have is one single Navigation controller, that controls the pushing of views. You decide which sub-view to push depending on which selection the user makes, and the Navigation controller handles the rest of the interaction with the user to let him or her navigate between the views.
Example structure:
Window-based app
+-MainWindow.xib
| +-First view with button
| +-UINavigationController
+-tableview1.xib
+-tableview2.xib
+-any more views you need.
Make the app delegate a <UINavigationControllerDelegate> and declare navCt *UINavigationController, and connect it in Interface Builder. You can then write a pushVC method, which takes as argument a UIViewController *vc. It does a [navCt pushViewController:vc animated:YES];
Connect the button to an IBAction, which then calls the method in the app delegate, [PushVC myVC], where myVC refers to any viewcontroller in your app, in this case table view 1.
In this table, on didSelectRow... event you can use the same method to push the sub-view table view 2.
I think this is minimum code if you are unsure about iPhone app design. Either way, I hope it gives some ideas.
You should read about UINavigationController, UITabBarController, UIViewController.
http://developer.apple.com/library/ios/#documentation/uikit/reference/UIViewController_Class/Reference/Reference.html
You almost always make one view pr. viewcontroller.
Im officially getting annoyed with objective-c and xcode now. Programming in PHP and Java is so much easier haha.
Anyway I could do with some help.
I have created a tab bar application with three tab items for the iPhone, on one of the items it loads a nib named mapView, this contains a button that I want to use to load up another nib named OverlayViewController.
Ive been following this tutorial this tutorial
to create a camera overlay. I understand how it works, but I don't understand how to run the view controller from a button or direct from the tab bar. I can only get the overlay to work if I load it like in the example on application launch in the app delegate. If I try and load it from the tab bar item I just get a grey screen, looks like the blank view controller is loaded and the code hasnt been run to show the overlay.
If anyone can suggest how I would go about loading the overlay from the button click, or even direct from the tab bar item I would be really grateful.
Thanks Alex
p.s. Heres the link to the project if you wish to view the files
#AlexApps I took a look through your project and have several pieces of feedback.
I think before you get too into trying to get the OverlayViewController working you should back up a bit and give some of the Apple docs a read, especially the View Controller Programming Guide. The Apple docs are for the most part well written and should help you gain a better understanding of views and view controllers than what is evident in your code.
Another suggestion is to grab some of the freely available source code from a book such as Beginning iPhone Programming which has a good example of how to lay out a tabBarController based app. I am sure there are other good samples out there that will show you how to organize your views and view controllers to load them into the different tabs.
I think that if you follow this advice that by the time you have restructured your app by what you learn you will have less problem doing what you are trying to do.
BTW, you may want to consider using a NavigationViewController for what you are trying to do with loading the OverlayViewController with a button press but take a few hours, slow down and do some focused reading. It will make a world of difference. Then if you have more specific questions, Stack Overflow (and Google) are your friends.
One last tip, you do not need to put IBOutlet in your instance variables AND in your properties, just one or the other, and really, you don't even need the instance variables at all anymore. I usually just use properties for everything.
I have done it with storyboard and the solution is to create a segue between the tab bar view controller and the view controller you want to load, then you have to put an identifier to that segue. Finally, in the method called when the button is pressed you have to put this:
[self performSegueWithIdentifier:#"segueId" sender:sender];
I have done it right now and it works perfect!
First import uiviewcontroller class in frist page like below:
#import "page2viewcontroller.h"
on button click event code below:
page2viewcontroller *page2 =[page2viewcontroller alloc] ;
[self presentModalViewController:page2 animated:NO];
[page2 release];
after back page2viewcontroller to page1viewcontroller same as like below:
#import "page1viewcontroller.h"
on backbutton click event code below:
page1viewcontroller *page1 =[page2viewcontroller alloc] ;
[self presentModalViewController:page1 animated:NO];
[page1 release];
That's all....!
I'm wondering if it is possible to start my app with all my tabs in the "up" state and show a "landing" view to the user. Kind of like a welcome/quick start. When they select one of the tabs, it switches views as normal.
Will you point me in the right direction?
Kind of like this:
If you're using a UITabBar/UITabBarController, I think you must have the selectedIndex set to some legal value. I don't think this is possible, nor can I find an app on my iPhone or iPod that mimics the behaviour you're looking for.
(The App Store app is as close as it gets, where it looks like it has an empty tab bar before it loads data from the Internet, but it could very well be that they are just re-using the Default.png and superimposing an activity indicator during loading.)
Note that if you tried to submit your app to Apple, they could easily reject it for using non-standard UI.
The way I would probably do this is to create a new ViewController that's just for this screen, but make sure it's last in the viewControllers array managed by the UITabBarController. That way, when you show the tab bar on the screen, you get the 4 tabs and the more button, but the currently selected view controller is not in the bar, meaning that all of the other tabs are unselected.
Once the user has satisfied the condition for showing the screen, you can discretely remove the view controller from the tab bar, and the user will never be the wiser.
I'm developing an iPhone application and I'm trying to do this:
I want an application with tree views. The view shown first, doesn't have a navigation bar. If the user tap on a button, I need to open the second view with a navigation bar and a table view. The user can also add new items to the table view. If the user do so, the application will show the third view where the user can add fields (this view has also a navigation bar).
It may seem simple, but for me it is not. I don't know how to use the UINavigationController and have not found yet a similar example for what I do (paragraph translated by google).
UPDATE
I don't know how where to put UINavigationController.
How can I do that? Can I use a UIViewController to call a UINavigationController?
Thank you.
take a look at the Recipes example (it also uses core data which may confuse things a little) http://developer.apple.com/iphone/library/samplecode/iPhoneCoreDataRecipes/Introduction/Intro.html#//apple_ref/doc/uid/DTS40008913
There is also a simpler starting point here http://developer.apple.com/iphone/library/samplecode/TableViewSuite/Introduction/Intro.html#//apple_ref/doc/uid/DTS40007318 but the Recipe example covers just about everything you need.
EDIT:added the following
For the very simplest example use XCode to build a new application - a navigation based application (sorry, I'm in front of a PC today so that is from memory). That will give you a blank application with the navigation controller created. You then use the navigation controller to push and pop your view controllers
ViewController Programming Guide