there is a error called Error! Could not find a Joomla! XML setup file in the package.while installing the module in joomla1.5. there is the xml file but the version notified in the xml file is 1.6. Is it becoz of that.How can i solve the problem.the module that i downloaded is from http://extensions.joomla.org/extensions/structure-a-navigation/menu-systems/select-box-menus
Since there is only one 1.6 native extension on that page I will assume you are installing Simple Select Box. There are versions depending on which version of Joomla you are using. The correct download for J!1.5 is here - http://joomlacode.org/gf/download/frsrelease/10339/40125/mod_SSB_1.5.4.zip
Related
time of installing migration tool in magento2.2.7 getting error "vertex/sdk 1.0.0 requires ext-soap * -> the requested PHP extension soap is missing from your system". But soap is already installed and enabled.
Check in your php.ini file. under your lampp folder
Search like php_soap.dll, each dll extension
removing the first ; character, like this
extension=php_soap.dll
Now restart the apache server
I am using Easyphp-DevServer-17 and PHP7 ,I want to use "memcached" with PHP-7.1 , I downloaded memcached dll files from the following link
php 7 memcahced
I tried adding dll files to ext folder in php 7 but phpinfo file
doesn't reflect it
and i tried following code
$servers = array(array('localserver', 11212));
$memcacheD = new Memcached;
but it throws following error "Fatal error: Uncaught Error: Class 'Memcached' not found"
Please help me on this issue as i am new to php and struggling to load memcached extension
First of all ensure you have the correct version of memcacheD. Most of the versions for Windows out there are memcache, without the D at the end, even the name of the libraries are called memcacheD. It's very misleading but I have added the link to the correct version below. To clarify, memcache and memcacheD are not the same and cannot be interchanged.
Run phpinfo() and make notations of Compiler, Architecture, Thread Safety, you will need this to get the correct version of the DLL.
Download the correct memcacheD version from https://github.com/lifenglsf/php_memcached_dll There are 2 files, the php extension DLL and the lib DLL. You need both.
Save the php extension DLL in your easyPHP folder, in my case was \eds-binaries\php\php713vc14x86x220414190951\ext.
Enable the extension in php.ini, I renamed the DLL so in my case I had to add the line extension=php_memcached.dll
Save libmemcached.dll in C:\windows
Reload Apache to ensure the config is refreshed.
And that's it. Now run phpinfo() again and should show there. If it's not working check Apache error log, it will tell you if the DLL failed to load. If you get the "not a Win32 application" message it means you didn't download the correct DLL.
Remember you also have to have the service running, memcached.exe -d start from cmd should do.
i'm having some issues getting modules to work on my app - I keep on getting told that the requested module cannot be found.
It is entirely possible that i'm not installing the modules correctly - so, for the purposes of this question:
Once i've downloaded the zip file from git hub using the green "download" button, what do i do to import the module into my project? Not how do i tell tiapp.xml to use the module - just what do i do to install it?
Can you please run through using the facebook module found at https://github.com/appcelerator-modules/ti.facebook
thanks!
Inside the zip file of the download you'll see there is a folder called modules. This is the same folder that is in your root of the project.
So, an iOS module should be installed in the /modules/iphone folder. Once added, you can add Facebook to your app like this:
<module platform="iphone">facebook</module>
If you want to specify a version you can do so like this:
<module platform="iphone" version="1.1.0>facebook</module>
note: I made up the version number
You can also add it through the tiapp editor in Appcelerator studio, although it doesn't always seem to find the module. This might be a bug in studio though, usually it works great.
HMMMM
Two main issues here, one directly relating, the other less so.
Issue 1
The link i gave to get the codebase from github is wrong - well, it gets the codebase, but not in a form that can be used as a module. It is, in fact, the uncompiled version.
Versions for download can be found here.
So that takes care of issue one, what about
Issue 2
The latest version for use is a bit broken. Seems someone (from the appcelerator team???) decided to make the latest 6.0.1 release have a minsdk of the (at this time) as-yet-unreleased version 6.0.0, and sets the apiversion to 3.
This breaks the current release of 5.5.1, so for anyone reading this prior to 6.0.0 for appcelerator, you will want to use this release version.
I am attempting to work through the N+1 TipCalc tutorial & get the following error when trying to compile the core project:
Error 1 Metadata file '1\packages\MvvmCross.HotTuna.CrossCore.3.0.4\lib\portable-win+net45+MonoAndroid16+MonoTouch40+sl40+wp71\Cirrious.CrossCore.dll' could not be found C:\Source.CS\trunk\Learning\Mono\TipCalc1\TipCalc.N=1\TipCalc.Core\CSC TipCalc.Core
Error 2 Metadata file '1\packages\MvvmCross.HotTuna.StarterPack.3.0.4\lib\portable-win+net45+MonoAndroid16+MonoTouch40+sl40+wp71\Cirrious.MvvmCross.dll' could not be found C:\Source.CS\trunk\Learning\Mono\TipCalc1\TipCalc.N=1\TipCalc.Core\CSC TipCalc.Core
Error 3 Metadata file '1\packages\MvvmCross.HotTuna.CrossCore.3.0.4\lib\portable-win+net45+MonoAndroid16+MonoTouch40+sl40+wp71\Cirrious.MvvmCross.Localization.dll' could not be found C:\Source.CS\trunk\Learning\Mono\TipCalc1\TipCalc.N=1\TipCalc.Core\CSC TipCalc.Core
NuGet 2.5 RC was installed from here https://nuget.codeplex.com/
Profile104 xml files created as per instructions & have been used for a few weeks with V3 prior to attempting to use NuGet for the MvvmCross components.
Pre NuGet TipCalc tutorial was accomplished without problems.
Downloading the complete project from GitHub also compiles without issues.
I haven't been able to see any difference between the packages.config file in the downloaded project and the project being created from scratch.
The profile of the core project is also the same in each case.
The dll's are at the location indicated.
There were no issues with using NuGet to download the package, only when attempting to compile the project.
Any suggestions as to what I have missed?
TIA
My guess is that the problem is in your path
The path seems to be C:\Source.CS\trunk\Learning\Mono\TipCalc1\TipCalc.N=1\TipCalc.Core\CSC
And the message is that '1\packages\MvvmCross.HotTuna.CrossCore.3.0.4\lib\portable-win+net45+MonoAndroid16+MonoTouch40+sl40+wp71\Cirrious.CrossCore.dll' could not be found
So maybe try using a path without an =?
I have recently setup XAMPP 1.7.3 and ZendFramework 1.10.4 on a new computer and many of the commands that I normally use now fail.
Here are the steps I used to setup and test ZF.
First I added the ZF library folder (C:\xampp\php\ZendFramework-1.10.4\library) to the include path in php.ini.
Then I added the ZF bin folder (C:\xampp\php\ZendFramework-1.10.4\bin) to my Path system variable.
To test that everything is configured correctly I ran the command "zf show version" from the command line. The result is "Zend Framework Version: 1.9.6".
Immediately something appears to be wrong. The file that is downloaded is "ZendFramework-1.10.4.zip" and the reported version is 1.9.6. I have re-downloaded the latest version (1.10.4) and removed old copy. Still the incorrect version number problem persisted.
Having done some research there is a bug in the ZF knowledgebase that version 1.10.3 reports a wrong version number. So that may explain the version number problem.
Moving forward I tried to run some zf-tool commands and certain commands reports that the action or provider is not valid.
Example:
C:\xampp\htdocs>zf create project test
Creating project at C:/xampp/htdocs/test
C:\xampp\htdocs>cd test
C:\xampp\htdocs\test>zf create controller Test
Creating a controller at C:\xampp\htdocs\test/application/controllers/TestController.php
...
Updating project profile 'C:\xampp\htdocs\test/.zfproject.xml'
C:\xampp\htdocs\test>zf create action test Test
Creating an action named test inside controller at C:\xampp\htdocs\test/application/controllers/TestController.php
...
Updating project profile 'C:\xampp\htdocs\test/.zfproject.xml'
C:\xampp\htdocs\test>zf enable layout
An Error Has Occurred
Action 'enable' is not a valid action.
...
C:\xampp\htdocs\test>zf create form Test
An Error Has Occurred
Provider 'form' is not a valid provider.
...
Can any one provide insight into these errors and how to correct them?
I had a similar issue, it turned out that I needed to manually update the zf.bat and zf.php files that came included with xampp after updating to the latest zend framework.
I got them from the zend svn here: http://framework.zend.com/svn/framework/standard/trunk/bin/
the simple way if you are using xampp, just go to the path "xampp\php\PEAR" an replace the older Zend directory with all included files by a new one zend 1.10... dir and your porblems are lost :)
i think your problem is, that Zend Tool is shipped with xampp since some versions.
Try to find zf.bat in your Xampp directory and remove it ;)
ZF friends have written the worst kind of docs. For XAMPP user, it is more difficult. I have learning ZF and posting error getting on the path. I am also using XAMPP.
Your error list is very big. I hope I can help you.
Solution for error "An Error Has Occurred
Action 'enable' is not a valid action." is XAMPP's Zend Tool installation. Delete that.
Check here for more details about the solution and other possible errors: http://www.satya-weblog.com/2010/11/zend-framework-creating-layout.html.