I'm trying to get PHP Web Publishing working with FMS 11.0.2.217 on Windows 7 and apache server. I've clicked the link on Filemaker Server Admin Console for PHP. The Filemaker PHP Site Assistant launches, I select Create New Site and enter Test as name and enter server ip and click connect. I receive the following error:
"Publishing engine is not running on the specified server"
Also in the FileMaker Server Admin Console >General Settings it does not hold the "Automatically start web publishing engine" check box after I click it and save. It does accept and hold "Automatically start Database Server"
What am I doing wrong?
Go to this URL in a browser like FireFox that supports XML rendering:
http://yourServerAddress/fmi/xml/FMPXMLRESULT.xml?-dbnames
You should get an XML listing of all of the databases on your server. If you get something else, then your Web Publishing Engine is not installed correctly, or is not running. In that case, I would recommend uninstalling and re-installing the Web Publishing Engine, or call FileMaker tech support.
Also be well aware that FMS does NOT support Apache on Windows.
Just a word of warning with FileMaker server / PHP -- ensure that your web application isn't high concurrent volume or you're going to have problems.
FileMaker Server has a very limited number of concurrent connections and the timeout value on requests makes using FileMaker Server problematic if you have a large number of concurrent sessions.
Related
I am setting up ColdFusion 2018 Application server with IIS 10. But getting too many redirects issue.
I have tried from square one.. Below are the things I did.
Installed CF 2018 developer
Configure IIS (Windows 10) with CF 2018 using wsconfig.
Created a simple “index.cfm” and tried to access. This page contains just cfset and cfoutput.
got 404 error.
updated “enable 32-bit applications” to false in IIS application pool
404 error resolved, but getting “Too Many redirects issue”
enabled developer tools in IE and checked.
getting 302 status code and it seems index.cfm is redirecting to itself.
Not sure what to do now? Is there anything I missed in setting up IIS with CF 2018 server?
You can resolve this error by making sure that the two required components of IIS are installed on your system. Namely:
ISAPI Extensions
IIS Metabase and IIS 6 configuration compatibility.
First, start the program called Windows Features. You will find Windows Features under Control Panel –> Programs and Features.
When the Windows Features starts, navigate through the features hierarchy under Internet Information Services and select the two features:
(a) ISAPI extensions and
(b) IIS Metabase and IIS 6 configuration compatibility.
Configuring IIS for ColdFusion:
You will have to run the Web Server Configuration Tool that comes with ColdFusion to configure IIS so that all .CFM files are mapped to be handled by ColdFusion.
The following text is directly from the ColdFusion installation guide:
1)Start the Web Server Configuration Tool by selecting Start > Programs > Adobe > ColdFusion 9 > Web Server Configuration Tool.
2)Click Add.
3)In the Server pop-up menu, select the host name and the server or cluster name to configure. In the ColdFusion server configuration, the server name is always coldfusion. Clustering support is not available on the server configuration.
Note: The server or cluster does not have to reside on the web server computer.
4)In the Web Server Properties area, select IIS and specify the website. For IIS, you typically specify All.
5)Select the Configure web server for ColdFusion applications option, and click OK.
Note: Omitting the previous step causes your web server to serve ColdFusion source code.
6)Copy the CFIDE and cfdocs directories from cf_root/wwwroot to your web server root directory. In addition, copy your application’s CFM pages from cf_root/wwwroot to your web server root directory. In the multiserver configuration, these files are under the jrun_root/servers/cfusion/cfusion-ear/cfusion-war directory.
if you face too many redirects then just enable 32-bit applications to true.
refer this link:
https://community.adobe.com/t5/coldfusion/strange-iis-redirect-issues-leads-to-jakarta-isapi-redirect-dll/td-p/4239297?page=1
I have bought a VDS (Virtual Dedicated Server) that Windows Server 2008 is installed on it. I needed to use server because I have developed a C# console application that can read data by TCP socket and write them in the MySQL database.
Now I need to start a website on this server. I think WAMP server is so easy for me.
Maybe in future a lot of people visit my website.
Is it a good idea to use WAMP server as a web server?
In principal there is nothing wrong with using WAMPServer as a LIVE webserver.
However, not the out of the box version.
Out of the box WAMPServer and XAMPP for that matter expect to be used as a single seat developer tool and while that is great for a click and go solution to get a developer up and running on Apache/MySQL and PHP in a few minutes it is not secure enough to be considered as a LIVE web facing webserver.
Now if you have the knowledge and experience to create an user account on Windows Server that has access to only what Apache needs to do its work, and can get Apache to run in that account instead of its default account (which has way to many privilages for a live server) and are prepared to explore all the Apache security features/modules that would be required for a web facing server then it is possible. However this is not a trivial task, and any mistakes or ommissions will leave your server open to the simplest of hacks.
In short, unless you really know what you are doing with Windows Server and Apache, you would be far better to pay for a professionally configured and managed web server environment.
I'm currently implementing the Class 2 WebDAV server on my company's MVC / noSQL web app. I'm developing it locally on my machine using visual studio 2013, IIS 8.5, Windows 8.1 and word 365. The documents are stored in the noSQL database.
I've managed to get it working in the past, however recently word refuses to connect to the WebDAV server. When I click the document link it open word and the following error appears:
{ correct web address} cannot connect to server.
I have used your built in logging tool and fiddler to see if any requests are made to the server and there are none.
Are there any steps or suggestion you can make to help me debug this problem.
After reading the documentation a few times and trial and error I found that word was caching in the registry. I followed the instructions and rebuilt my project and it seems to have worked.
http://www.webdavsystem.com/server/documentation/ms_office_read_only
Clear Microsoft Office WebDAV cache in registry. Microsoft Office reads WebDAV server options when connecting to server first time and stores them for later use. If your server settings has changed during development (or you just fixed some server issues) you may need to delete this settings. The Microsoft Office WebDAV cache is stored under the key:
HKEY_CURRENT_USER\Software\Microsoft\Office\\Common\Internet\Server Cache\
To clear cache just delete all keys under this key. In a development environment we suggest always clearing the cache if your WebDAV server class has changed or after authentication scheme has changed. As an alternative to deleting cache, you can just reconfigure your server to run on a different port.
Note that in production environment usually you do not need to clear this cache or change port as soon as you server settings do not change often while Microsoft Office will re-request server options after some time.
As soon as your code worked in the past and now stopped working I guess that the trial period, which is 1 month, of IT Hit WebDAV Ajax Library has ended. Are there any errors in the web browser console? To start a new trial period just redownload it here.
I need to show to a user an interface of some application running on a server using a browser. It should be like RDP-client for a single application on a server.
Are there any solutions or services that can implement following functionality? Maybe Citrix?
Thanks in advance!
This looks like what you're looking for:
http://freerdp.net/
About FreeRDP-WebConnect
FreeRDP-WebConnect is an open source gateway for accessing RDP
sessions using any HTML5 compliant browser. In particular it relies on
the Canvas and the WebSockets feature. FreeRDP-WebConnect is a
subproject of the FreeRDP project.
On the server side, a standalone daemon - written in C++ - provides a
Web page via HTTPS (or HTTP, if configured) and uses FreeRDP libs to
connect as a client to any RDP session. The server side WebSockets
implementation handles current RFC6455 only, so browsers that
implement the older drafts do not work. With RFC6455 being raised to
the "Proposed Standard" level, this should change now really soon.
I would create an account on the server for the user, and only give it access to the one application it needs access to.
You can use Cameyo. To start, create yourself a free account, and click on "Add App". If your installer supports unattended installation, you simply need to submit it. Otherwise, you can build a Cameyo package locally and send it in. It will then be playable as HTML5.
You don't indicate what server you are running on.
As an alternative to FreeRDP-Webconnect cited above, also open source and also using FreeRDP as rdp client through an HTTP gateway, there is Myrtille.
FreeRDP-WebConnect embeds a standalone daemon written in C++ to provide a web page via HTTP(S), and so will also work on Linux servers, while Myrtille have a IIS/.NET (C#) implementation and an MSI installer, thus is more intended for Windows Servers.
I've got SQL Server 2008 with SSIS/SSRS installed on my development box. I followed through the installation notes and everything appeared to install just fine - no errors or anything. I've got it configured using all the defaults for now until I figure out what is what. So the server can be accessed via http://localhost:80/ReportServer and the reports via http://locahost:80/Reports.
I've created a dummy report against the AdventureWorks database to test report creation and deployment and after some initial headaches which were resolved by running BIDS as an administrator, I'm having problems accessing the reports via the web interface and indeed, I'm having the same issue accessing the report server via the web interface.
When I open the URLs in any browser - IE/Firefox/Chrome they all prompt me for credentials. My dev box isn't part of a domain and the credentials I use to log into the machine don't appear to be what it is after as they don't connect successfully. I don't really understand why it's asking for credentials at all due to the fact that the address is an intranet address. In either case, IE is configured to pass through my Windows credentials when logging into machines on the intranet.
Did I configure something incorrectly when I set it up? Does anyone have any decent tutorials for not only installing SSRS, but configuration for development machines.
Try opening your browser with elevated (Administrator) privelages. Did that help?
This may also be related...
http://blogs.msdn.com/b/lukaszp/archive/2008/07/18/reporting-services-http-401-unauthorized-host-headers-require-your-attention.aspx