I'm writing a report that can be exported to excel and using cross tabs. I have two groups A and B, where A can contain multiple subgroups of B.
When I drag A and B into the rows on the left, the outermost group A spans multiple rows depending on how many subgroups of B there are.
Is there a way to have group A repeat itself for every row of B? Like a full table without any of that cell-spanning.
I'm not sure if this will work for you since it means you can't do Totals on the outer group, but here is one possible solution. Create one formula that concatenates both group A and group B values together and use that in your cross tab instead. In this example, I had to use a format string to get the numerical-to-string values to sort correctly.
EDIT: Never mind, I fixed it so you can have the outer group Totals, too. Just leave the outer grouping the way it was, but replace the inner grouping with your new concatenated string (via the formula you just made). You'll have to suppress the outer group header (shown in the screenshot) and format the grid lines to look nicer or overlay a whiteout box, though (not shown in screenshot).
Related
I've made a crosstab in crystal report like below:
However, as you can see, the ordering is weirld (i.e. the correct one should be like below:)
And the ordering is stored in another field called order, I took a look in the crystal report's cross-tab expert sorting option, it doesn't allow me to order by another column, it only allows me to sort either ascending or descending, how can I set the ordering by another column?
Crosstab's sorting is based on the rows order, if you want to sort it in your on you have to add some extra rows and have to suppress subtotal and Label in Customize Style of Crosstab Expert
Example:
If you have 3 rows(A,B,C) to display and you have to sort it in order like B,C,A then you have to add 2 new rows(B,C) now your Crosstab looks like (B,C,A,B,C) now you have to suppress Rows B and C you meet your both requirements for sorting and display order
But This solution have some limitations like
if you want to export the report in Excel then it will add extra cells in grand total.
otherwise you are good to go.
Example:
If you have 3 rows(A,B,C) to display and you added one row and you suppress it to solve your sorting issue then in Excel its grand total looks like
A B C
a 1 3
b 2 2
---------------------------
Total: 3 5
Yes, you can not sort on another column. You must use any of one column as a header.
In Crystal report, sorting happened based on header column's value (That's why you see as per alphabetic).
I also face this issue and how I solved, that I am explain. You have to use a formula which have order, but either hide it or use a value like in this link.
https://scn.sap.com/thread/3341846
Second option as per this link. (I think first you check this)
http://www.codeproject.com/Tips/493334/Custom-sorting-for-Crystal-Report-Cross-Tab
https://scn.sap.com/thread/1172741
open crosstab expert, highlight the column that you want to reorder, go to Group Options and select in specified order. This will open another tab where you will have your available values listed there. Using the arrows on the right side you can move up or down your values and accommodate them in the order you want them to be displayed.
Simple way would be take order column from stored procedure to cross tab and set the order according to that column.
Then supress the order column and reduce the width of that column to minimum pixel so that it doesn't appear in cross tab.
Make the field you want to sort by a group field and hide it. To hide it, in the Crosstab Expert > Customize Style dialog select this group then use the Group Options area to Suppress Subtotal and Supress Label. Worked for me.
Use the order field as the grouping column and change the label for said column to show the actual sizes. The labels can be changed in Crosstab Expert, Grouping Options and then the tab Options.
I'm trying to display multiple values for one drive by adding a column for each additional record assigned to a drive. For example, a drive ID is unique but can have multiple promotional incentives assigned to it.
For example, if we go to a university on 1/23/2015, that will a unique event or record in the DriveMaster table, but if we are giving away T-Shirts and Pizza, those two records will be assigned to the drive in the EquipmentDetail table.
In SSRS, I'm trying to create a sub-report that will display the promotional items on one line instead of adding additional lines for each promotional item. See screenshot below.
What I'd like to have happen is have the each drive only account for 1 row, and each promotional item listed in a new column to the right. See mockup in Excel.
Is there a way to handle this? I know there is in Crytal Reports, but I can't figure this out in SSRS. I've tried using a Matrix, but I can't see to get the columns to grow if there are multiple incentives.
I added a column group on the Description field, and it looks like that it is close, but that the grouping will create blank spaces (cells) in it.
Thanks,
You have to set a Column Group for your promotional item in your Matrix.
Hope that helps.
Edit:
It looks like there are some areas that contain no data (because of your groupings)
We can do something like the following:
In your query you can use the 'over'
Select DriveID, PromotionItem, ... ,
ROW_NUMBER() Over(Partition by Select DriveID, PromotionItem, ... Order by PromotionItem)
AS ColumnGroupNumber
Then in the Promotion Item group that you have change the field it groups on to the ColumnGroupNumber (or whatever you are going to call it). Just don't change the field in the detail row, or you will not see the details.
I have used this solution before. I found it here.
I'm trying to modify a report created in Crystal Reports 7 (which I know almost nothing about). I want to use a CrossTab, as this seems to be the best way to accomplish what I want. I have a column with three possible values: A, B, C. The cross tab creates three columns. I want to suppress C. How can I do this?
Also, is there anyway to create rows based on one field (i.e. a PK value), but display another - like a description? For example, if a list of states have a PK value of 1-50, I want them ordered by PK, but I want to display the state name.
All you ask is possible;
i suggest not to use cross tab: cross tab is intended for an uknown number of rows and columns (varying on data) ad for summarizing (max value, sum of values) results on a grid.
you should, instead:
Create a blank report
Drop the fields from the Field explrorer into the Details Section (just A and B columns)
Use Report Sort Expert to sort elements no the PK value
I have using Cross Tab in my report. The column is the Activities. The rows is the user name. The row will show the number of time the user attend those activities. How i can create a top N to show which activities has the most attendance? Please help.
Thanks
If you want to leave the Cross-Tab you have alone, then my suggestion would be to just add another Cross-Tab to the same report section that only has every activity summarized by row as counts of attendees. You could then restrict that CT to only show the Top-2 activities (By going to Group Sort Expert -> Sort by Top N -> N=2). You could even suppress the fields you don't want to show and hide the grid lines so that only the top 2 activities are actually spelled out.
An alternative is to pivot your original CT so that each row was an activity instead of a user, and then sort by the attendance in descending order. This would make it obvious which activities were the top 2.
Is it possible to have add a row to an SSRS 2008 Matrix that spans all of the matrix's columns?
This crude diagram shows roughly what I'm looking for:
The basic idea is that each line item is a person, and each column is a field in a form for that person. The fields themselves are dynamic (and implemented as column groups on the matrix). Additional column groups are included to append non-dynamic form fields, like the time the record was entered and who entered it. Under each person's record is a comments field, which should span all of the form fields above it.
At the moment I have the matrix embedded in another tablix, with the name and fields in the matrix and the comments in the parent tablix. This works for the data (each instance of the matrix ends up being one row), but the header repeats too often (once per person) because it's attached to the matrix. The only thought I have as to how to fix this is to create another matrix in the parent tablix with the same grouping and use it to display the headers... But this will require quite a lot of manual synchronization to keep the two matrices the same.
Edit: The key problem here is making the second row span multiple column groups.
Here's what you can do:
Select the column grouping you want to add above and right click and select
Add Group... Parent Group...
Group the column by something that will not aggregate the data. You'll have to select a field from your dataset to group by so that it creates an overlapping column grouping.
Check the Add group header box
You should now see something similar to this:
Now you just need to move the Value1 field and it's header over under the new column to the right beyond the matrix dividers. Once that's done, simply delete the ungrouped column where you just copied Value1 from and be sure to select Delete columns only checkbox.
Your finished product should look like this:
It is possible - And the above answers are partial answers leaving out one key step: Merging the cells of the child row.
First, right click on your grouped row, then select Insert Row -> Inside Group - Below and you will get two rows with the cells aligning on the columns
Second, ctrl click all the cells in your new row (ie row without the data) then right click on one of the highlighted cells, and then select Merge Cells.
Now you have the table you like. To add a value to the new row: first right click your new (multi column) cell,select Create Placeholder, and then add the dataset item you desire to the placeholder.
[Edit]
After several attempts, I'm going to say this isn't possible in SSRS. The best I could come up with is a group footer that spans columns 1,2, and 3, but not the User column.
[Original Response]
I recently did something similar to this.
First, what tool are you using to create SSRS reports? (I used SQL Server Business Intelligence Development Studio)
You'll want to create a row group (grouped on Person)
Append a row to your table in "Design" view (Right click, "Insert Row --> Inside Group - Below").
Add an expression to the row that pulls the value for your "Comment" column (=Fields!Comment.Value).
Let me know if that helps...
Try adding in you column group "header" with a grouping expression of (1=1). Then a detail field will need to be defined. If you define the other group with correct data then the "header" will stretch across all details columns. You may need to merger depending on other options.
The easiest way to do this is to create a Tablix with only one column, and your row grouping.
Then, you create two rows inside this group.
In the first row inside the group, you insert a Matrix, wich you can then subgroup as you prefer.
I just had a similar problem, and this was my solution.
I banged my head against the wall for a lot of time, until i realized the solution to my problem wasn't "making a cell span multiple column groups", but "making a cell split into multiple column groups".
You can accomplish the goal by using a subreport for each person. The subreport will receive the employee id and create the hierarchy for you. Make sure your subreport column widths match the widths of the parent report.