Is it possible to have add a row to an SSRS 2008 Matrix that spans all of the matrix's columns?
This crude diagram shows roughly what I'm looking for:
The basic idea is that each line item is a person, and each column is a field in a form for that person. The fields themselves are dynamic (and implemented as column groups on the matrix). Additional column groups are included to append non-dynamic form fields, like the time the record was entered and who entered it. Under each person's record is a comments field, which should span all of the form fields above it.
At the moment I have the matrix embedded in another tablix, with the name and fields in the matrix and the comments in the parent tablix. This works for the data (each instance of the matrix ends up being one row), but the header repeats too often (once per person) because it's attached to the matrix. The only thought I have as to how to fix this is to create another matrix in the parent tablix with the same grouping and use it to display the headers... But this will require quite a lot of manual synchronization to keep the two matrices the same.
Edit: The key problem here is making the second row span multiple column groups.
Here's what you can do:
Select the column grouping you want to add above and right click and select
Add Group... Parent Group...
Group the column by something that will not aggregate the data. You'll have to select a field from your dataset to group by so that it creates an overlapping column grouping.
Check the Add group header box
You should now see something similar to this:
Now you just need to move the Value1 field and it's header over under the new column to the right beyond the matrix dividers. Once that's done, simply delete the ungrouped column where you just copied Value1 from and be sure to select Delete columns only checkbox.
Your finished product should look like this:
It is possible - And the above answers are partial answers leaving out one key step: Merging the cells of the child row.
First, right click on your grouped row, then select Insert Row -> Inside Group - Below and you will get two rows with the cells aligning on the columns
Second, ctrl click all the cells in your new row (ie row without the data) then right click on one of the highlighted cells, and then select Merge Cells.
Now you have the table you like. To add a value to the new row: first right click your new (multi column) cell,select Create Placeholder, and then add the dataset item you desire to the placeholder.
[Edit]
After several attempts, I'm going to say this isn't possible in SSRS. The best I could come up with is a group footer that spans columns 1,2, and 3, but not the User column.
[Original Response]
I recently did something similar to this.
First, what tool are you using to create SSRS reports? (I used SQL Server Business Intelligence Development Studio)
You'll want to create a row group (grouped on Person)
Append a row to your table in "Design" view (Right click, "Insert Row --> Inside Group - Below").
Add an expression to the row that pulls the value for your "Comment" column (=Fields!Comment.Value).
Let me know if that helps...
Try adding in you column group "header" with a grouping expression of (1=1). Then a detail field will need to be defined. If you define the other group with correct data then the "header" will stretch across all details columns. You may need to merger depending on other options.
The easiest way to do this is to create a Tablix with only one column, and your row grouping.
Then, you create two rows inside this group.
In the first row inside the group, you insert a Matrix, wich you can then subgroup as you prefer.
I just had a similar problem, and this was my solution.
I banged my head against the wall for a lot of time, until i realized the solution to my problem wasn't "making a cell span multiple column groups", but "making a cell split into multiple column groups".
You can accomplish the goal by using a subreport for each person. The subreport will receive the employee id and create the hierarchy for you. Make sure your subreport column widths match the widths of the parent report.
Related
I want to add rows to a Tableau text table without making the row a subset of the previous row. Using the example below, I want values for teams and status to display on separate rows rather than status appearing as a subset of team. I also want to add a team filter so that if I filter on team blue, values for green row are zero and status values update . Is this possible? I tried creating separate worksheets but keeping things aligned is problematic.
Example Data:
Desired text table:
What I don't want:
Select both the fields(team, status) simultaneously then right click and go to Transform > Pivot.
Then 2 Dimensions will be created. Drag the Pivot Field Values on to Rows section
and Year on to Columns section and keep Year in Discrete format.
Then drag Number of Records on to value field section.
Before Pivot:
After Pivot and final viz:
I'm using Tableau Desktop v9.0. I have data that looks like this:
code,items
02050252,7
03040620,19
03060423,3
I want to create a bar chart of the items grouped by the first two characters of the code field.
So effectively a chart that shows this underlying data:
new_code,items
02,7
03,22
Is it possible to do this within Tableau? Or do I need to group the data manually myself first?
You can definitely do this within Tableau.
Make sure that your code column is a string. If it's not, right click on it in the dimensions section and choose Change Data Type.
Then, create a calculated field (Analysis -> Create Calculated Field) and enter the expression LEFT([Code], 2), which will take the first two characters of the code field.
Drag your new_code field to the Rows shelf and Items to the Columns shelf and voila, you have your desired data. You can of course change the type of the chart, make it a table, etc. from here.
I group my table by 3 attributes, and set page break on every group, and now i want to display that three attribute outside the table. I want to place them on the top of the report, and when i type the expression and i go in run view it's display only the first value, when i go to the next page nothing change
I tried to drag field from table, from data set, and nothing working.
In expression i type
=Fields!My_Field.Value.
Also if some of that three attributes i placed in table it normally displays values, but when i try to move it somewhere it stops displaying.
The issue is that a table is associated with a dataset but a text box is not.
You can reference a field from a text box using the Dataset field ( =Sum(Fields!AMOUNT.Value, "Dataset1") ) but you need to use an aggregate function like First, Last, or SUM.
It sounds like you don't want to use an aggregate since you are grouping by these fields, though.
display the three attribute outside the table
If your trying to display the current grouping in the table at the top of each page, add a new Row in your matrix above your header row and add your group fields there.
I'm trying to display multiple values for one drive by adding a column for each additional record assigned to a drive. For example, a drive ID is unique but can have multiple promotional incentives assigned to it.
For example, if we go to a university on 1/23/2015, that will a unique event or record in the DriveMaster table, but if we are giving away T-Shirts and Pizza, those two records will be assigned to the drive in the EquipmentDetail table.
In SSRS, I'm trying to create a sub-report that will display the promotional items on one line instead of adding additional lines for each promotional item. See screenshot below.
What I'd like to have happen is have the each drive only account for 1 row, and each promotional item listed in a new column to the right. See mockup in Excel.
Is there a way to handle this? I know there is in Crytal Reports, but I can't figure this out in SSRS. I've tried using a Matrix, but I can't see to get the columns to grow if there are multiple incentives.
I added a column group on the Description field, and it looks like that it is close, but that the grouping will create blank spaces (cells) in it.
Thanks,
You have to set a Column Group for your promotional item in your Matrix.
Hope that helps.
Edit:
It looks like there are some areas that contain no data (because of your groupings)
We can do something like the following:
In your query you can use the 'over'
Select DriveID, PromotionItem, ... ,
ROW_NUMBER() Over(Partition by Select DriveID, PromotionItem, ... Order by PromotionItem)
AS ColumnGroupNumber
Then in the Promotion Item group that you have change the field it groups on to the ColumnGroupNumber (or whatever you are going to call it). Just don't change the field in the detail row, or you will not see the details.
I have used this solution before. I found it here.
I have a matrix in an SSRS 2008 report. The rows are grouped on the Time field, and the columns are grouped on the FieldName field. Pretty standard stuff, you can see the designer view of it below.
This works pretty well, except that in some instances I need to hide the "time" column (highlighted in the image).
I've tried setting the Hidden property, both on the column itself and the individual fields. This leaves a large empty area where the column would normally display. I've tried setting the hidden value for the time row group, but that hides the entire row of data.
Is there any way to hide this information with SSRS 2008?
I was able to find a work-around with a little experimentation. Here's what I did:
Added an adjacent column group to the FieldName column. This column was grouped on Time (the same as the row group).
Set the header of the new column group to always display the text "Time."
Right-clicked on the selection button for this new column and selected "Column Visibility..." from the list. Entered the hidden expression I wanted.
Deleted the original Time column, choosing to retain the associated group.