I have a thousand .dat files to run with the same program. Is there any faster way or script to run it automatically instead of run them one by one? The .dat files have different filenames.
The program is something like:
fid=fopen('**abd**.dat');
C=textscan(...);
...
save('**abd**.txt',data);
The abd is the file name. I have thousands of files with different file names. It is a bit annoying by keep copying and pasting those filenames into the program and run it. Anyone got a faster way or code for this?
you can use "dir" to get a list of files, and then process them in a loop like this.
fns = dir('*.dat');
for i = 1:length(fns)
fid = fopen(fns(i).name);
C = textscan(...);
fclose(fid);
save([fns(i).name,'.dat'],data);
end
Rethink the problem. Write one script to read a text file of file names and strings. Then you've got 2 files, not thousands.
Related
At the moment I have working code that can read multiple .log files and create a giant .txt file which contains all their data. Then I simply read the giant .txt file. However, this code is inefficient because it involves writing a new .txt file every time I want to run the script.
Does someone know how to simplify this so that it doesn't write a new .txt file every time? Ideally by creating a 'virtual' .txt file?
files=dir('IndividualFiles.*.log');
fileout='GIANT.txt';
fout=fopen(fileout,'w');
for cntfiles=1:length(files)
fin=fopen(files(cntfiles).name);
temp = fread(fin,'uint8');
fwrite(fout,temp,'uint8');
fprintf(fout,'\n');
fclose(fin);
end
fclose(fout);
filename = 'C:\Users\myname\Desktop\Learning Documents\myfolder\GIANT.txt';
So I'm trying to copy files for statements so there is a pdf and an xml file with the same name and different file extensions. I need to copy lets say 1000 files at a time so that would be 500 pairs of pdf and xml files. I'm trying setup a batch file to do this, but I'm not sure how to get it to check the filenames to get the pair to copy at the same time. The reason I need the pair is because if just one or the other is there it will bomb out and not process. Any help is greatly appreciated.
Thanks,
Corey
I am looking for a way to count the number of files in a folder path without caring about the names of the files. DIR function extracts all the names which is unnecessary for my specific application.
Since I'm looking at 100 folders and each folder includes almost 35000 files in it, it is very time consuming if I use the "dir" function.
Any help is greatly appreciated.
Do
someDir = 'c:\Users\You\somePath\' //whatever directory you want to do it for
[status,cmdout] = System(['dir ' someDir '*.* /s'])
and you can parse out the number of files from cmdout
This should be faster because its just running a system command so you lose all the overhead of matlab.
there are datasets in .mat format in the this site: http://www.cs.nyu.edu/~roweis/data.html
I want to change the format to .csv.
Can someone tell me how to change the format to create the .csv file.
Thanks!
Suppose that the .mat files from the site are available already. In the command window in Matlab, you may write, for example:
load('C:\Users\YourUserName\Downloads\mnist_all.mat');
to load the .mat file; the result should be a set of matrices test0, test1, ..., train0, train1 ... created in your workspace, which you want saved as CSV files. Because they're different size, you need to save one CSV per variable, e.g. (also in the command window):
csvwrite('C:\Users\YourUserName\Downloads\mnist_test0.csv', test0);
Repeat the command for each variable, and do not forget to change also the name of the output file to avoid overwriting.
Did you tried the csvwrite function in Matlab?
Just load your .mat files with the load function and then write them with csvwrite!
I do not have a Matlab license so I installed GNU Octave 4.2.1 (2017) on Windows 10 (thank you to John W. Eaton and others). I was not fully successful using the csvwrite so I used the following workaround. (BTW, I am totally incompetent in the Octave world. csvwrite worked for simple data structures).
In the Command Window I used the following two commands
load myfile.mat
save("-text","myfile.txt","variablename")
When the "myfile.mat" is loaded, the variable names for the data vectors loaded are displayed in the workspace window. This is the name(s) to use in the save command. Some .mat files will load several data structures.
The "-text" option is the default, so you may not need to include this option in the command.
The output file lists the .mat file contents in text format as single column (of potentially sequential variables). It should be easy to use you text editor to massage this data into the original matrix structure for use in whatever app you are comfortable with.
Had a similar issue. Needed to convert a series of .mat files that had two columns of numerical data into standard data files (ascii text). Note that I don't really ever use csv, but everything here could be adapted by using csvwrite instead of the standard save.
Using Octave 4.2.1 ....
load myfile.mat
LI = [L, I] ## L and I are column vectors representing my data
save myfile.txt LI
Note that L and I appear to be default variable names chosen by Octave for the two columns vectors in my original data file. Ideally a script that iterated over all files with the .mat extension in my directory would be ideal, but this got the job done. It saves the data as two space separated columns of data.
*** Update
The following script works on Octave 4.2.1 for a series of data files with the .mat extension that are in the same directory. It will iterate over them and write the data out to text files with the same name but with the extension .dat . Note that this is not efficient, so if you have a lot of files or if they are large it can take a while to run. I would suggest that you run it from the command line using octave mat2dat.m so you can actually watch it go.
I make no guarantees that this will work for you, but it did for me. I also am NOT proficient in Octave or Matlab, so I'm sure a better solution exists.
# mat2dat.m
dirlist = glob("*.mat")
for i=1:length(dirlist)
filename = dirlist{i,1}
load(filename, "L", "I")
LI = [L,I]
tmpname = filename(1:length(filename)-3)
txtname = strcat(tmpname, 'dat')
save(txtname, "LI")
end
I am new to MATLAB programming and some of the syntax escapes me. So I need a little help. Plus I need some complex looping ideas.
Here's the breakdown of what I have:
12 seperate .dat files, each titled something like output_1_x.dat, output_2_x.dat, etc.
each file is actually one piece of a whole that was seperated and processed
each .dat file is approx. 3.9 GB
Here's what I need to do:
create a single file containing all the data from each seperate file, i.e. I need to recreate the original file.
call this complete output file something like output_final.dat
it has to be done in MATLAB, there are no other alternatives (actually there maybe; see note below)
What is implied:
I will have to fread each 3.9 GBfile into chunks or packets, probably 100 mb at a time (using an imbedded loop?)
these packets will have to be read then written sequentially
after one file is read then written into output_final.dat, the next file is automatically read & written (the master loop).
Well, that's pretty much it. I did a search for 'merging mulitple files' and found this. That isn't exactly what I need to do...I don't need to take part of a file, or data from files, and write it to a new one. I'm simply...concatenating...? This would be simple in Java or Perl, but I only have MATLAB as a tool.
Note: I am however running KDE in OpenSUSE on a pretty powerful box. Maybe someone who is also an expert in terminal knows a command/script to do this from the kernel?
So on this site we usually would point you to whathaveyoutried.com but this question is well phrased.
I wont write the code but i will give you how I would do it. So first I am a bit confused about why you need to fread the file. Are you just appending one file onto the end of another?
You can actually use unix commands to achieve what you want:
files = dir('*.dat');
for i = 1:length(files)
string = sprintf('cat %s >> output_final.dat.temp', files(i).name);
unix(string);
end
That code should loop through all the files and pipe all of the content into output_final.dat.temp (then just rename it, we didn't want it to be included in anything);
But if you really want to use fread because you want to parse the lines in some manner then you can use the same process:
files = dir('*.dat');
fidF = fopen('output_final.dat', 'w');
for i = 1:length(files)
fid = fopen(files(i).name);
while(~feof(fid))
string = fgetl(fid) %You may choose to parse the string in some manner here
fprintf(fidF, '%s', string)
end
end
Just remember, if you are not parsing the lines this will take much much longer.
Hope this helps.
I suggest using a matlab.io.matfileclass objects on two of the files:
matObj1 = matfile('datafile1.mat')
matObj2 = matfile('datafile2.mat')
This does not load any data into memory. Then you can use the objects' methods to sequentialy save a variable from one file to another.
matObj1.varName = matObj2.varName
You can get all the variables in one file with fieldnames(mathObj1) and loop through to copy contents from one file to another. You can then clear some space by removing the copied fields. Or you can use a bit more risky procedure by directly moving the data:
matObj1.varName = rmfield(matObj2,'varName')
Just a disclaimer: haven't tried it, use at own risk.