I've been trying to install the IPTables module for perl http://metacpan.org/pod/IPTables::IPv4 and I've been running into errors during installation.
I've tried installing using the CPAN in shell as well as downloading the tarball form the link above. Both installation give me errors. I am not sure how to get the dump from CPAN but what I can get is a dump of my shell when I run the MAKE file from the tarball:
[root#localhost IPTables-IPv4-0.98]# make
make -C libiptc/ all
make[1]: Entering directory `/home/student/Downloads/IPTables-IPv4-0.98/libiptc'
gcc -o libip6tc.o -c libip6tc.c -I../include -I/usr/src/linux/include -DIPTABLES_VERSION=\"1.2.8\" -O2 -Wall
In file included from libip6tc.c:111:0:
libiptc.c: In function ‘ip6tc_init’:
libiptc.c:312:10: warning: pointer targets in passing argument 5 of ‘getsockopt’ differ in signedness
/usr/include/sys/socket.h:190:12: note: expected ‘socklen_t * __restrict__’ but argument is of type ‘int *’
libiptc.c: In function ‘target_name’:
libiptc.c:727:2: warning: dereferencing type-punned pointer will break strict-aliasing rules
libip6tc.c: In function ‘ipv6_prefix_length’:
libip6tc.c:121:7: error: ‘const struct in6_addr’ has no member named ‘in6_u’
libip6tc.c:125:7: error: ‘const struct in6_addr’ has no member named ‘in6_u’
libip6tc.c: In function ‘dump_entry’:
libip6tc.c:201:3: warning: dereferencing type-punned pointer will break strict-aliasing rules
make[1]: *** [libip6tc.o] Error 1
make[1]: Leaving directory `/home/student/Downloads/IPTables-IPv4-0.98/libiptc'
make: *** [libiptc/libiptc.a] Error 2
[root#localhost IPTables-IPv4-0.98]#
I would like to know what do I need to do so that I can install the module. Are there some dependencies that I need to install?
Your help is greatly appreciated.
The cpanratings and CPAN testers reports for this module make me think that you're wasting your time here.
Related
this is a bit of a long shot but:
I'm following this guide: https://www.tutorialspoint.com/postgresql/postgresql_c_cpp.htm
But when running ./configure I get the following error:
(previous checking lines omitted for brevity)
checking for main in -lpq... yes
checking for PQexec in -lpq... yes
checking for correct C++ linkage of basic libpq functions...
sed: character class syntax is [[:space:]], not [:space:]
configure: error:
Linking a call to libpq failed in C++, even though it succeeded in C. If your
C and C++ compilers are very different beasts, this may mean that we do not have
the right options for linking with it after all.
Read the config.log file for more detailed information. Look for the last error
message, which may be several pages up from the end of the file.
And the configure.log file looks like this:
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by libpqxx configure 4.0, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ ./configure
## --------- ##
## Platform. ##
## --------- ##
(some lines omitted)
configure:3039: g++ -V >&5
g++: error: unrecognized command line option '-V'
g++: fatal error: no input files
compilation terminated.
configure:3050: $? = 1
configure:3039: g++ -qversion >&5
g++: error: unrecognized command line option '-qversion'; did you mean '--version'?
g++: fatal error: no input files
compilation terminated.
(some lines omitted)
configure:7629: gcc -E conftest.c
conftest.c:11:10: fatal error: ac_nonexistent.h: No such file or directory
#include <ac_nonexistent.h>
^~~~~~~~~~~~~~~~~~
compilation terminated.
(some lines omitted)
configure:8319: gcc -c -g -O2 -fno-rtti -fno-exceptions conftest.c >&5
cc1: warning: command line option '-fno-rtti' is valid for C++/ObjC++ but not for C
(some lines omitted)
configure:16424: g++ -o conftest -g -O2 -L/usr/lib/x86_64-linux-gnu conftest.cpp >&5
/tmp/ccfFBf4K.o: In function `main':
/home/peter/libpqxx-4.0/conftest.cpp:44: undefined reference to `PQexec'
collect2: error: ld returned 1 exit status
(some liens omitted)
I don't believe I have any packages missing. I have the newest version of g++, psql and libpqxx installed.
I have updated and upgraded all packages on my system.
I have crawled the web for solutions to this error, but I have no clue what is wrong.
Do you have an idea where I can go from here?
There hasn't been a tarball release of libpqxx at the old spot in a long time, so the tutorial you used with its wget command to download the tarball is very outdated.
The issue you encountered looks related to this issue and appears to have been fixed in this commit:
commit 85e9336740475be25ed19924cca0961f7d844c4b
Author: Jeroen Vermeulen <jtvjtv#gmail.com>
Date: Thu Jun 1 11:39:08 2017 +0700
Fix #13: not linking to libpq.
This was that annoying interaction between autoconf, m4, GNU sed syntax,
and the shell which broke the "remove redundant -lpq options" code in
the configure script.
Solution: forget about GNU sed's "[[:space:]]" syntax, and just look for
a literal space. There aren't going to be any tabs, newlines,
non-breaking spaces, etc. there in even a moderately sane world.
I tried to install Orion context Broker on Ubuntu 14.04 with Alien but when I do contextBroker start it says:
contextBroker: error while loading shared libraries: libboost_thread-mt.so.5: cannot open shared object file: No such file or directory
I couldn't find where is the error then I tried to install with all the dependencies from the instructions in Git, but when I try to do the make it makes an error:
[ 26%] Building CXX object src/lib/serviceRoutines/CMakeFiles/serviceRoutines.dir/exitTreat.cpp.o
In file included from /home/sistemas/fiware-orion-develop/src/lib/serviceRoutines/exitTreat.cpp:32:0:
/home/sistemas/fiware-orion-develop/src/lib/mongoBackend/MongoGlobal.h:30:35: fatal error: mongo/client/dbclient.h: No existe el archivo o el directorio
#include "mongo/client/dbclient.h"
I have the mongo's driver installed, how can I solve this?
Finally I compile a new driver from https://github.com/mongodb/mongo-cxx-driver/releases and it continues compiling until:
*
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp: In function ‘void recoverOnTimeIntervalThread(std::string, mongo::BSONObj&)’:
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:532:40: error: ‘class mongo::OID’ has no member named ‘str’
std::string subId = idField.OID().str();
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp: In function ‘void destroyOnTimeIntervalThread(std::string, mongo::BSONObj&)’:
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:583:40: error: ‘class mongo::OID’ has no member named ‘str’
std::string subId = idField.OID().str();
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp: In function ‘void releaseTriggeredSubscriptions(std::map<std::basic_string<char>, TriggeredSubscription*>&)’:
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:17: error: ‘string’ was not declared in this scope
for (std::map<string, TriggeredSubscription*>::iterator it = subs.begin(); it != subs.end(); ++it)
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:17: note: suggested alternative:
In file included from /usr/include/c++/4.9/iosfwd:39:0,
from /usr/include/boost/smart_ptr/shared_ptr.hpp:49,
from /usr/include/boost/shared_ptr.hpp:17,
from /usr/include/mongo/client/dbclient_rs.h:20,
from /usr/include/mongo/client/dbclient.h:59,
from /home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:27:
/usr/include/c++/4.9/bits/stringfwd.h:62:33: note: ‘std::string’
typedef basic_string<char> string;
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:47: error: template argument 1 is invalid
for (std::map<string, TriggeredSubscription*>::iterator it = subs.begin(); it != subs.end(); ++it)
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:47: error: template argument 3 is invalid
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:47: error: template argument 4 is invalid
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:59: error: invalid type in declaration before ‘it’
for (std::map<string, TriggeredSubscription*>::iterator it = subs.begin(); it != subs.end(); ++it)
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:59: error: expected ‘;’ before ‘it’
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:59: error: ‘it’ was not declared in this scope
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:94: error: expected ‘)’ before ‘;’ token
for (std::map<string, TriggeredSubscription*>::iterator it = subs.begin(); it != subs.end(); ++it)
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:50: error: unused variable ‘iterator’ [-Werror=unused-variable]
for (std::map<string, TriggeredSubscription*>::iterator it = subs.begin(); it != subs.end(); ++it)
^
/home/sistemas/fiware-orion/src/lib/mongoBackend/MongoGlobal.cpp:1911:98: error: ‘it’ was not declared in this scope
for (std::map<string, TriggeredSubscription*>::iterator it = subs.begin(); it != subs.end(); ++it)
^
cc1plus: all warnings being treated as errors
make[3]: *** [src/lib/mongoBackend/CMakeFiles/mongoBackend.dir/MongoGlobal.cpp.o] Error 1
make[3]: se sale del directorio «/home/sistemas/fiware-orion/BUILD_RELEASE»
make[2]: *** [src/lib/mongoBackend/CMakeFiles/mongoBackend.dir/all] Error 2
make[2]: *** Se espera a que terminen otras tareas....
[ 88%] Building CXX object src/lib/xmlParse/CMakeFiles/xmlParse.dir/xmlRegisterProviderRequest.cpp.o
*
Is a problem in a file of Orion Context Broker?
I think that it could be a problem with de mongo's driver again but I try to install another one older and it doesn't work. I also think it can be a problem with de -mt libraries that doesn't exist in boost anymore, but nothing that I try until now works.
I've installed Orion CB using Ubuntu 14.04 LTS as host. I've also found some problems with libboost_thread-mt.so libraries. Solved this way:
Get & install packages
boost-thread-1.41.0-25.el6.x86_64.rpm
boost-system-1.41.0-25.el6.x86_64.rpm
boost-filesystem-1.41.0-25.el6.x86_64.rpm
and install them using alien. Then, the libraries were installed in “/usr/lib64” folder. To correct this (and CB is able to locate them): create a .conf file within “/etc/ld.so.conf.d/”, add a line (“/usr/lib64”) within and save it and quit and reload your configuration by calling (“sudo ldconfig”)
Hope this helps
So, here we have two questions in one. Let's start with the first one, about shared library not found:
Ask the broker where the library should be, using "ldd $(which contextBroker) | grep boost_thread).
After running this command, make sure the library is there. If it is not, but you have it elsewhere, you should be able to use the env var LD_LIBRARY_PATH to point to the directory where the library is found.
Now, for the second question, the mongo driver includes are not found. In my machine, I have them in /usr/local/include/mongo => I'm ok with the -I/usr/local/include directive to the compiler.
If you have your mongo driver installed elsewhere, you might need to add another 'include-directory' for the compilation. This would be done in the top-level CMakeLists.txt (I guess using 'include_directories' - I'm far from a cmake expert :-)).
When building, to see detailed information, compile like this:
% CPU_COUNT=1 VERBOSE=1 make install
Post the info again here unless you manage to solve your problems.
I'm trying to do face detection on perl, and I found out about OpenCV and the perl module Image::ObjectDetect on CPAN here and here. I've done a clean install of CentOS 6.5 (minimal) on a virtual machine to test this, and then:
yum -y update
yum -y install perl cpan opencv
Ok, and considering I never user cpan before, I tried the obvious (after some short google searches)
perl -MCPAN -e shell
[accept default]
install Image::ObjectDetect
that gave me some errors:
Package opencv was not found in the pkg-config search path.
Perhaps you should add the directory containing `opencv.pc'
to the PKG_CONFIG_PATH environment variable
No package 'opencv' found
After googling about that error, I did:
export PKG_CONFIG_PATH=/usr/local/lib/pkgconfig
mkdir /usr/local/lib/pkgconfig
vi /usr/local/lib/pkgconfig/opencv.pc
the content of the file:
prefix=/usr
exec_prefix=${prefix}
includedir=${prefix}/include
libdir=${exec_prefix}/lib
Name: opencv
Description: The opencv library
Version: 2.x.x
Cflags: -I${includedir}/opencv -I${includedir}/opencv2
Libs: -L${libdir} -lopencv_calib3d -lopencv_imgproc -lopencv_contrib -lopencv_legacy -l
After I ran the install again, I noticed I was missing gcc:
/bin/sh: gcc: command not found
yum -y install gcc
Running the install again now gives me:
...
Note (probably harmless): No library found for -lopencv_calib3d
Note (probably harmless): No library found for -lopencv_imgproc
Note (probably harmless): No library found for -lopencv_contrib
Note (probably harmless): No library found for -lopencv_legacy
Note (probably harmless): No library found for -l
Writing Makefile for Image::ObjectDetect
Could not read '/root/.cpan/build/Image-ObjectDetect-0.12-BsNNjF/META.yml'. Falling back to other methods to determine prerequisites
cp lib/Image/ObjectDetect.pm blib/lib/Image/ObjectDetect.pm
cp lib/Image/ObjectDetect.xs blib/lib/Image/ObjectDetect.xs
/usr/bin/perl /usr/share/perl5/ExtUtils/xsubpp -typemap /usr/share/perl5/ExtUtils/typemap ObjectDetect.xs > ObjectDetect.xsc && mv ObjectDetect.xsc ObjectDetect.c
gcc -c -I/usr/include/opencv -I/usr/include/opencv2 -Isrc -I/usr/include/opencv -I/usr/include/opencv2 -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom -fasynchronous-unwind-tables -DVERSION=\"0.12\" -DXS_VERSION=\"0.12\" -fPIC "-I/usr/lib/perl5/CORE" ObjectDetect.c
In file included from ObjectDetect.xs:7:
/usr/lib/perl5/CORE/cv.h:13: error: redefinition of ‘struct xpvcv’
/usr/lib/perl5/CORE/cv.h:94: error: conflicting types for ‘xpvcv_allocated’
/usr/lib/perl5/CORE/cv.h:94: note: previous declaration of ‘xpvcv_allocated’ was here
ObjectDetect.xs:8:21: error: highgui.h: No such file or directory
ObjectDetect.xs: In function ‘XS_Image__ObjectDetect_new’:
ObjectDetect.xs:19: error: ‘CvHaarClassifierCascade’ undeclared (first use in this function)
ObjectDetect.xs:19: error: (Each undeclared identifier is reported only once
ObjectDetect.xs:19: error: for each function it appears in.)
ObjectDetect.xs:19: error: ‘cascade’ undeclared (first use in this function)
ObjectDetect.xs:22: warning: implicit declaration of function ‘cvLoad’
ObjectDetect.xs: In function ‘XS_Image__ObjectDetect_xs_detect’:
ObjectDetect.xs:37: error: ‘IplImage’ undeclared (first use in this function)
ObjectDetect.xs:37: error: ‘img’ undeclared (first use in this function)
ObjectDetect.xs:37: error: ‘gray’ undeclared (first use in this function)
ObjectDetect.xs:37: warning: left-hand operand of comma expression has no effect
ObjectDetect.xs:39: error: ‘CvMemStorage’ undeclared (first use in this function)
ObjectDetect.xs:39: error: ‘storage’ undeclared (first use in this function)
ObjectDetect.xs:40: error: ‘CvHaarClassifierCascade’ undeclared (first use in this function)
ObjectDetect.xs:40: error: ‘cascade’ undeclared (first use in this function)
ObjectDetect.xs:41: error: ‘CvSeq’ undeclared (first use in this function)
ObjectDetect.xs:41: error: ‘objects’ undeclared (first use in this function)
ObjectDetect.xs:42: error: ‘CvRect’ undeclared (first use in this function)
ObjectDetect.xs:42: error: ‘rect’ undeclared (first use in this function)
ObjectDetect.xs:46: warning: implicit declaration of function ‘cvLoadImage’
ObjectDetect.xs:50: warning: implicit declaration of function ‘cvCreateImage’
ObjectDetect.xs:50: warning: implicit declaration of function ‘cvSize’
ObjectDetect.xs:51: warning: implicit declaration of function ‘cvCvtColor’
ObjectDetect.xs:51: error: ‘CV_BGR2GRAY’ undeclared (first use in this function)
ObjectDetect.xs:52: warning: implicit declaration of function ‘cvEqualizeHist’
ObjectDetect.xs:54: warning: implicit declaration of function ‘cvCreateMemStorage’
ObjectDetect.xs:55: error: expected expression before ‘)’ token
ObjectDetect.xs:56: warning: implicit declaration of function ‘cvHaarDetectObjects’
ObjectDetect.xs:58: error: ‘CV_HAAR_DO_CANNY_PRUNING’ undeclared (first use in this function)
ObjectDetect.xs:65: error: expected expression before ‘)’ token
ObjectDetect.xs:74: warning: implicit declaration of function ‘cvReleaseMemStorage’
ObjectDetect.xs:75: warning: implicit declaration of function ‘cvReleaseImage’
ObjectDetect.xs: In function ‘XS_Image__ObjectDetect_DESTROY’:
ObjectDetect.xs:86: error: ‘CvHaarClassifierCascade’ undeclared (first use in this function)
ObjectDetect.xs:86: error: ‘cascade’ undeclared (first use in this function)
ObjectDetect.xs:88: error: expected expression before ‘)’ token
ObjectDetect.xs:89: warning: implicit declaration of function ‘cvReleaseHaarClassifierCascade’
make: *** [ObjectDetect.o] Error 1
JIRO/Image-ObjectDetect-0.12.tar.gz
/usr/bin/make -- NOT OK
Warning (usually harmless): 'YAML' not installed, will not store persistent state
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
JIRO/Image-ObjectDetect-0.12.tar.gz : make NO
Any help? Thanks.
Glad to see someone using OpenCV with Perl! I hope you can get it working and show us some nice asps and scripts :-)
You seem to be building from source and installing packages (with yum) - this sometimes complicates matters when it comes to dependencies. For example, you may have a version of OpenCV that is too new for the CPAN module. Image::ObjectDetect` is fairly old
(the last release was several years ago http://metacpan.org/pod/Image::ObjectDetect) whereas OpenCV is being actively developed.
Note this line:
ObjectDetect.xs:8:21: error: highgui.h: No such file or directory
I came across a similar error compiling applications that depend on OpenCV after a recent update. Either the header files were missing; the applications Makefiles did not know how to locate them; or other development libraries and headers in the chain of dependencies needed updating as well.
You may get better luck solving this by posting to the OpenCV development list where the error message may look more familiar.
See: http://groups.yahoo.com/neo/groups/OpenCV/info
You could try installing some other modules to see if it is perl, XS, gcc or your version of OpenCV that is at fault. Here's another module that uses OpenCV:
https://github.com/shisful/Image-OpenCV
When I try to install Net::SSL I get the following output. I don't understad it at all. Can anyone point me in the right direction, without getting to techy?
C:\Documents and Settings\Administrator>cpan
CPAN: File::HomeDir loaded ok (v0.69)
cpan shell -- CPAN exploration and modules installation (v1.9205)
ReadLine support enabled
cpan> install Net::SSL
Database was generated on Tue, 14 Aug 2012 14:54:56 GMT
Running install for module 'Net::SSL'
Running make for N/NA/NANIS/Crypt-SSLeay-0.64.tar.gz
Checksum for C:\strawberry\cpan\sources\authors\id\N\NA\NANIS\Crypt-SSLeay-0.64.
tar.gz ok
Scanning cache C:\strawberry\cpan\build for sizes
............................................................................DONE
CPAN.pm: Going to build N/NA/NANIS/Crypt-SSLeay-0.64.tar.gz
The test suite can attempt to connect to public servers to ensure that the
code is working properly. If you are behind a strict firewall or have no
network connectivity, these tests may fail (through no fault of the code).
Do you want to run the live tests (y/N)? [N]
WARNING: BUILD_REQUIRES is not a known parameter.
Checking if your kit is complete...
Looks good
Warning: prerequisite LWP::Protocol::https 6.02 not found.
'BUILD_REQUIRES' is not a known MakeMaker parameter name.
Writing Makefile for Crypt::SSLeay
cp lib/Crypt/SSLeay/X509.pm blib\lib\Crypt\SSLeay\X509.pm
cp lib/Net/SSL.pm blib\lib\Net\SSL.pm
cp SSLeay.pm blib\lib\Crypt\SSLeay.pm
cp lib/Crypt/SSLeay/Conn.pm blib\lib\Crypt\SSLeay\Conn.pm
cp lib/Crypt/SSLeay/CTX.pm blib\lib\Crypt\SSLeay\CTX.pm
cp lib/Crypt/SSLeay/MainContext.pm blib\lib\Crypt\SSLeay\MainContext.pm
cp lib/Crypt/SSLeay/Err.pm blib\lib\Crypt\SSLeay\Err.pm
C:\strawberry\perl\bin\perl.exe C:\strawberry\perl\lib\ExtUtils\xsubpp -typemap
C:\strawberry\perl\lib\ExtUtils\typemap -typemap typemap SSLeay.xs > SSLeay.xs
c && C:\strawberry\perl\bin\perl.exe -MExtUtils::Command -e mv SSLeay.xsc SSLeay
.c
gcc -c -IC:\strawberry\c\include -s -O2 -DWIN32 -DHAVE_DES_FCRYPT -DPERL_
IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -fno-strict-aliasing -DPERL_MSVCRT_READFIX
-s -O2 -DVERSION=\"0.64\" -DXS_VERSION=\"0.64\" "-IC:\strawberry\perl\lib
\CORE" SSLeay.c
SSLeay.xs:35:25: openssl/ssl.h: No such file or directory
SSLeay.xs:36:28: openssl/crypto.h: No such file or directory
SSLeay.xs:37:25: openssl/err.h: No such file or directory
SSLeay.xs:38:26: openssl/rand.h: No such file or directory
SSLeay.xs:39:28: openssl/pkcs12.h: No such file or directory
SSLeay.xs:55: error: syntax error before '*' token
SSLeay.xs: In function `InfoCallback':
SSLeay.xs:60: error: `where' undeclared (first use in this function)
SSLeay.xs:60: error: (Each undeclared identifier is reported only once
SSLeay.xs:60: error: for each function it appears in.)
SSLeay.xs:60: error: `SSL_ST_MASK' undeclared (first use in this function)
SSLeay.xs:62: error: `SSL_ST_CONNECT' undeclared (first use in this function)
SSLeay.xs:64: error: `SSL_ST_ACCEPT' undeclared (first use in this function)
SSLeay.xs:69: error: `SSL_CB_LOOP' undeclared (first use in this function)
SSLeay.xs:70: error: `s' undeclared (first use in this function)
SSLeay.xs:72: error: `SSL_CB_ALERT' undeclared (first use in this function)
SSLeay.xs:73: error: `SSL_CB_READ' undeclared (first use in this function)
SSLeay.xs:75: error: `ret' undeclared (first use in this function)
SSLeay.xs:78: error: `SSL_CB_EXIT' undeclared (first use in this function)
SSLeay.c: In function `XS_Crypt__SSLeay__CTX_new':
SSLeay.c:146: error: `SSL_CTX' undeclared (first use in this function)
SSLeay.c: In function `XS_Crypt__SSLeay__CTX_use_pkcs12_file':
SSLeay.c:334: error: `SSL_CTX' undeclared (first use in this function)
SSLeay.c:334: error: `ctx' undeclared (first use in this function)
SSLeay.xs:188: error: `EVP_PKEY' undeclared (first use in this function)
SSLeay.xs:188: error: `pkey' undeclared (first use in this function)
SSLeay.c:421: error: `ctx' undeclared (first use in this function)
SSLeay.c:646: error: `ssl' undeclared (first use in this function)
SSLeay.c:658: error: syntax error before ')' token
LOTS OF LINES SIMILAR TO ABOVE
SSLeay.xs:505: error: invalid type argument of `->'
dmake.EXE: Error code 129, while making 'SSLeay.o'
NANIS/Crypt-SSLeay-0.64.tar.gz
C:\strawberry\c\bin\dmake.EXE -- NOT OK
Running make test
Can't test without successful make
Running make install
Make had returned bad status, install seems impossible
Failed during this command:
NANIS/Crypt-SSLeay-0.64.tar.gz : make NO
I had the same problem and, although I had the openSSL package installed, the development headers where not. I had to install the package libssl-dev. I used the Ubuntu Software Center to download and install the package. Alternately, you could use sudo apt-get install libssl-dev from the terminal command line.
That fixed my problem but is no real help to you working with windows. openSSL has a link to a binary for windows at: OpenSSL for Windows
The following lines suggest that you probably have not installed the OpenSSL library/headers or it is in a location not known to perl. Install it with the package manager of your operating system, or compile and install it.
>SSLeay.xs:35:25: openssl/ssl.h: No such file or directory
>SSLeay.xs:36:28: openssl/crypto.h: No such file or directory
>SSLeay.xs:37:25: openssl/err.h: No such file or directory
>SSLeay.xs:38:26: openssl/rand.h: No such file or directory
>SSLeay.xs:39:28: openssl/pkcs12.h: No such file or directory
After installing the library/headers, cpan should be able to make and install Net::SSL.
Generally CPAN takes care of this for you by installing all the dependent modules.
The problem you are facing is with this warning
WARNING: BUILD_REQUIRES is not a known parameter.
Now since CPAN is unable to read this parameter it is unable to get all the dependent modules for you and hence is unable to install.
The Problem may be with the perl-ExtUtils-MakeMaker module with comes with cpan utility.
You may want to install the latest version of cpan and try. Or as previously mentioned You may want to install all the modules after downloading them individually and then installing them manually.
First, I have got the problem like this:
mod_qos.c:83:26: error: openssl/rand.h: No such file or directory
mod_qos.c:84:25: error: openssl/evp.h: No such file or directory
Then I used the following:
apxs -I/usr/local/openssl/include/openssl -i -c mod_qos.c -lcrypto -lpcre
and it succeeded! Why?
I'm trying to install gtk+-3.2.3 on Ubuntu natty. This is a fresh Ubuntu install with security updates only. I have not installed any new versions of gtk. I just have gtk2, that Ubuntu comes with. First I installed the following:
sudo apt-get install libffi-dev zlib1g-dev fam libdbus-1-dev libdbus-glib-1-dev gobject-introspection libxext-dev libxrender1-dbg colordiff libcairo2-dev libtiff4-dev libpng12-dev libxft-dev libxi-devel
I have the following folders in: /home/mike/gtk
atk-2.1.5
gdk-pixbuf-2.24.1
glib-2.30.1
gtk+-3.2.3
pango-1.29.1
Then:
cd /home/mike/gtk/glib-2.30.1
./configure && make
rm -rf /home/mike/gtk/include/glib.h /home/mike/gtk/include/gmodule.h (glib INSTALL instructions)
repeat for the other folders except without the rm, in the following order:
atk-2.1.5
gdk-pixbuf-2.24.1
pango-1.29.1
gtk+-3.2.3
Before running ./configure for gtk+-3.2.3 enter this in the terminal:
CPPFLAGS="-I/home/mike/gtk/include"
LDFLAGS="-L/home/mike/gtk/lib"
PKG_CONFIG_PATH="/home/mike/gtk/lib/pkgconfig"
export CPPFLAGS LDFLAGS PKG_CONFIG_PATH
LD_LIBRARY_PATH="/home/mike/gtk/lib"
PATH="/home/mike/gtk/bin:$PATH"
export LD_LIBRARY_PATH PATH
export PKG_CONFIG_PATH="/home/mike/gtk/lib/pkgconfig:$PKG_CONFIG_PATH"
I get the these errors when I run make on gtk+-3.2.3:
gdkwindow-x11.c: In function '_gdk_x11_moveresize_handle_event':
gdkwindow-x11.c:4301:9: error: 'XIEvent' undeclared (first use in this function)
gdkwindow-x11.c:4301:9: note: each undeclared identifier is reported only once for each function it appears in
gdkwindow-x11.c:4301:18: error: 'ev' undeclared (first use in this function)
gdkwindow-x11.c:4301:33: error: expected expression before ')' token
gdkwindow-x11.c:4302:9: error: 'XIDeviceEvent' undeclared (first use in this function)
gdkwindow-x11.c:4302:24: error: 'xev' undeclared (first use in this function)
gdkwindow-x11.c:4302:46: error: expected expression before ')' token
gdkwindow-x11.c:4306:16: error: 'XI_Motion' undeclared (first use in this function)
gdkwindow-x11.c:4308:13: warning: implicit declaration of function '_gdk_x11_device_xi2_translate_state'
gdkwindow-x11.c:4313:16: error: 'XI_ButtonRelease' undeclared (first use in this function)
make[4]: *** [gdkwindow-x11.lo] Error 1
make[4]: Leaving directory `/home/mike/gtk/gtk+-3.2.3/gdk/x11'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/home/mike/gtk/gtk+-3.2.3/gdk'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/home/mike/gtk/gtk+-3.2.3/gdk'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/mike/gtk/gtk+-3.2.3'
make: *** [all] Error 2
You place GTK3's source code in an arbitrary directory (into which you have write permissions). And you run ./configure from there.
You may want to pass the configure scripts (of each package) a common --prefix to override the default of /usr/local/ (this is needed, e.g. with --prefix $HOME/pub, if you cannot write under /usr/ because you don't have root access).