for example when I am typing int main() it would be nice if I could just hit tab and get the list of keywords (auto completion) I want. How can I do this in Emacs?
You can autocomplete with M-/. There are also other autocomplete packages available.
You need CEDET, it contains many good tools that can be used to make EMACS have many features that you would see in a more modern IDE.
You may use yasnippet. By writing 'main' and then TAB, you get
int main (int argc, char *argv[])
{
return 0;
}
(This is not really auto completion.)
Asher's answer with the list is probably the best but if you want something that gives you a drop down of possible (non semantic) completions which you can select, you can use auto complete mode.
Related
In Emacs, I want to achieve an IDE-like behaviour with parenthesis block and cursor position. That is, when I type, for example, int main() { RET, it should expand to
int main() {
I <- cursor position
}
I've installed smartparens plugin to automatically insert pairs, but it doesn't deal with the cursor:
int main() {
I <- cursor position}
Consider using Yasnippets, a template system for Emacs which comes with a lot of templates preinstalled. In your case:
mainTAB
will expand to:
int main(int argc, char *argv[])
{
CURSOR
return 0;
}
What you request is already the case in Emacs, starting with release 24.4.
You can enable the behavior by turning on electric-indent-mode, if it is not already enabled by default (Emacs 24.4 or later). Put this in your init file to enable the mode:
(when (fboundp 'electric-indent-mode) (electric-indent-mode 1))
However, you need at least Emacs release 24.1 to use electric-indent-mode. It is not available in older releases.
As #Drew pointed out electric-indent-mode, I've looked up different electric-modes in Emacs and figured out that electric-pair-mode fits exactly my needs.
I have autocomplete set up for Emacs, and for elisp, it works perfectly fine. I have it set up to use ctags for completion in C++ files and the suggestions appear as expected. However, it doesn't update suggestions as I type. For example, if I type:
vector<string> s;
s.
it suggests 'at'. However, if I add to it so that it looks like:
vector<string> s;
s.push
the suggestion doesn't update and still displays 'at' as the first suggestion, rather than 'push_back'.
I am an Emacs novice and have virtually no elisp knowledge, and was wondering how I can configure autocomplete so that it updates suggestions for C++ as I type.
I'd like to quickly move point to a function in my Emacs buffer. I'd like to run some function and get a prompt asking me for the function name, with completion provided for every function defined in the current buffer.
I generally use etags to navigate around, but sometimes I'm looking for a framework method that's been overridden in several files. In these cases, I can find the file I need but then I'd like to quickly jump to the function there. There is a similar feature in TextMate where you can select a definition from a list in the bottom right of the editor.
Just to jump around functions in the current file? Use imenu. It's the simplest and lightest of all the alternatives listed so far and might be enough for what you want. It's also built into Emacs and has minimum setup hassle. It features graphical and textual interfaces. Anything extra and you'll be better off using one of the other excellent suggestions made here.
speedbar comes standard, and gives you a collapsible menu for each file in the current directory, by default middle clicking on an entry for a function definition jumps to that def. With emacs23 this was changed to the more normal leftclick.
You can use etags-select to select from multiple matching tags. But the answer to what you asked is imenu.
Icicles is probably closer to what you are looking for:
http://www.emacswiki.org/emacs/Icicles_-_Tags_Enhancements
It's an enhancement to etags and includes (among other things) the file name with the tag so you can tell if it's the one you are looking for.
try CEDET. It is a bit difficult to set up the first, but here is an excellent tutorial: by Alex ott
And when he gets installed, you can use semantic-complete-jump. pressed tab couple times, and it is also brings up symbol definitions.
If M-. brings up the wrong method, you can type C-u M-. to find the next one with the same name.
global gtags is very good
To navigate within the current file or a set of files that you select, you do not need a TAGS file. You can use Imenu. But it is better to use Icicles imenu commands.
Why? Because they let you use completion. Substring, regexp, prefix, or fuzzy completion. Combine simple patterns to match, or subtract them.
Command icicle-imenu is bound in Icicle mode to C-c =. Butyou can also look up just a command or just a non-command function (non-interactive), using command icicle-imenu-command or icicle-imenu-non-interactive-function.
These commands are multi-commands, meaning that they are actually browsers: you can trip among function definitions using keys C-RET or C-mouse-2 (direct jumps) and C-down (cycle). Hit RET or click mouse-2 to settle down at a final destination.
I use C-M-a and C-M-e to jump between the beginning and end of functions.
Otherwise, open up Speedbar and click the + icon next to a file name to view a list of functions contained in the file. Then click on the function names to jump to them directly.
How can I make Emacs to complete words that are in C include files ?
#include <stdio.h>
int main(){
print//<-- this is where I want it to complete printf
What's the simplest way? (something simpler than Cedet)
First generate tags for the source and include files you'd like to be able to autocomplete for. See my blogpost for tips on using tags if you didn't use tag tables before.
Now if you have a TAGS table that includes the stdio.h, then you can autocomplete 'printf' using the command `complete-tag'.
Perhaps bind `complete-tag' to a key:
(global-set-key [f3] 'complete-tag)
Unlike complete-tag, dabbrev-expand, or hippie-expand (which does dabbrev-expand like things), the CEDET suite does exactly what the question describes. When asked to perform a completion, it looks and sees that you have included stdio.h, and then looks there for possible completions.
CEDET does a lot of other things related to completion as well which will provide very focused and correct suggestions, not just vaguely similar suggestions. A side affect is that CEDET takes more effort to setup. You need to teach it where you include files are, for example, and sometimes how to deal with macros, and what the project you are working on is like.
There is more detail on this here:
link text
You might want to try out M-/ (dabbrev-expand). This command attempts to complete the identifier immediately preceding the point (ie, where your cursor is) using the contents of the current buffer and then the contents of other buffers of the same mode. If the first completion offered isn't the one you want, just keep typing M-/. If you have the habit of keeping a single emacs session open continuously (which, if you don't have, you should really acquire), and have a handful of files from the current project open, you're quite likely to be able to find an the expansion you want for any particular prefix.
So, to answer you're original question, M-/ will find the printf completion you're looking for if (a) you've used printf anywhere else in the buffer you're editing, or (b) it appears in any other .c or .h file you have open in emacs.
You might also try hippie-expand, which has additional options regarding where it looks for completion information. I bind M-/ to hippie-expand, and then modified the order of the elements in hippie-expand-try-functions-list as follows:
(global-set-key (kbd "M-/") 'hippie-expand)
(setq hippie-expand-try-functions-list '(try-expand-dabbrev try-expand-dabbrev-all-buffers try-expand-dabbrev-from-kill try-complete-file-name-partially try-complete-file-name try-expand-all-abbrevs try-expand-list try-expand-line try-complete-lisp-symbol-partially try-complete-lisp-symbol))
This makes hippie-expand act like the normal M-/ at first, but repeated presses will yield more possible expansions.
Surprisingly as you get good at vim, you can code even faster than standard IDEs such as Eclipse. But one thing I really miss is code completion, especially for long variable names and functions.
Is there any way to enable code completion for Perl in vim?
Ctrl-P (Get Previous Match) and Ctrl-N (Get Next Match) are kind of pseudo code completion. They basically search the file (Backwards for Ctrl-P, Forwards for Ctrl-N) you are editing (and any open buffers, and if you are using TAGS anything in your TAG file) for words that start with what you are typing and add a drop down list. It works surprisingly well for variables and function names, even if it isn't intellisense. Generally I use Ctrl-P as the variable or function I am looking for is usually behind in the code. Also if you keep the same copy of Vim open, it will search the files you have previously opened.
Vim 7 supports omni completion.
For example, I have this in my vimrc
autocmd FileType php set omnifunc=phpcomplete#CompletePHP
and then, when I press Ctrl-X Ctrl-O in Insert mode, I get a dropdown list of autocomplete possibilities.
Here's an omnicfunc for perl. No idea how well it works though.
Well, Vim's generic completion mechanism is surprisingly good, just using Ctrl-N in insert mode. Also, line completion is very handy, using C-x C-l.
Also check out this vim script for perl.
The standard Ctrl+N and Ctrl+P works even better if you add the following to your ~/.vim/ftplugin/perl.vim file:
set iskeyword+=:
Then it will autocomplete module names, etc.
The .vimrc clip in one of the other answers is slightly wrong. To turn your tab key into an auto-complete key, use this code:
inoremap <tab> <c-r>=InsertTabWrapper()<cr>
function! InsertTabWrapper()
let col = col('.') - 1
if !col || getline('.')[col - 1] !~ '\k'
return "\<tab>"
else
return "\<c-p>"
endif
endfunction
You can find this, and tons of other vim tricks in this thread at Perlmonks--which links to even more threads with lots more customizations.
You should look at the SuperTab plugin:
http://www.vim.org/scripts/script.php?script_id=1643
It let's you do completion (either the OmniCompletion or the regular completion) using tab and shift-tab instead of ^N and ^P.
https://github.com/c9s/perlomni.vim
Ctrl+N
This is explained in the Perl Hacks book, along with how to do Package completion. Highly recommended.