Here are the problems that I'm facing with a small jQuery script :
In the input with value hello after I click on add button followed by clicking on remove, The link to add vanishes. What triggers this in jQuery?
Upon clicking on add below the second input, a new link for remove is added for each input field that is added, I would want only one remove link that would remove the most recently added input field.
Check out My jsFiddle to see the problems in action.
****** MIND READING MODE ON ******
I think this is what you need:
http://jsfiddle.net/nicolapeluchetti/pgDcq/4/
Tell me if it's ok
UPDATE
****** MIND READING MODE OFF******
Mission accomplished
Related
please bear with me while I try to explain my problem. I am opening a form in Add mode; the form is bound to a single table but contains a subform linked to another table - the 2 tables have a 1 to many relationship. I enter some data which triggers the autoref to populate on the main form, and create a linked record on the subform. I then click a button on the main form to open another form. Using vba on the OnClick event of this button, I save the record on the current form and create a new record in a different table. This table is the data source for the 2nd form, and I open the form filtered to the newly created record. I enter some data in this secondary form and then click a button which takes a calculated value and populates a field on the main form and then closes the second form. The problem is that when it returns to the main form it seems to have lost the original record, as if it's back in Add mode. However, if I enter data on the main form and then simply close it, I can re-open it (in Edit mode) and open the 2nd form and back again without any problem. Sorry for the long-winded explanation but hope someone can help.
I've been programming Access for almost 20 years, and I've never found a use for Add mode. In other words, it has always been more trouble than it is worth.
Since you are coding already, I would just use DoCmd.GoToRecord , , acNewRec where needed to take you to a new record. Just make sure AllowAdditions is set to Yes in form properties.
Since this question is very general, it is hard to get any more specific than this. But if you do run into a specific problem that you can demonstrate in your code, update your question and I'll take a look.
What I am trying to accomplish:
Use button to open a form, filter the form, and set specific value to an unbound textbox in the opened form's header. There are multiple buttons being used open the same form and I would like this textbox to changed every time a specific button is clicked.
What I have done so far:
Used a macro to open the form and the "where" condition to filter the records. I also used "SetProperty" to change the value of the unbound textbox in the opened form's header depending on which button was clicked. When I do used the SetProperty option in the macro I get the error "The control name ... is misspelled or refers to a control that doesn't exist. Error 32004
I have verified numerous times that this is the correct name for the textbox and everything. I am pretty new to access and don't do VBA all that much so any assistance would be greatly appreciated. Thanks.
First Form and Macro for the "Physical Security" Button
Second form with error and unbound txt box I want to change to "Physical Security"
A few Ideas to track down your problem:
Maybe there's a problem with opening and (immediately) accessing the forms controls(?) You could try to fire a macro from within the same from that (only) changes the value of this text-box to make sure it definitely works there. Of course you'd want to make it work there if it failed before you'd go back to your original problem.
Is the property called value? Could it be text?
Are you sure you need to separate (all) hierarchies using !? Just by desperation: Maybe try using Forms!frmVW.txtXY or Forms.frmVW.txtXY
If that doesn't solve it:
It's often best to reduce your problem to it's very basics. Copy your application (!!!!) and radically delete unneeded stuff. Or start a short experiment from scratch (one or two forms, maybe only a button and a textbox, a macro, most probably not even a single Datatable/Source).
I have taken over development of a tool that helps our company fill out standardized contracts. It is a Visual Basic form in Word.
There is one very small issue left, but it is annoying.
So we have a form that starts when a new document created from the template and this works just fine, however before the form is presented to the user, another form(at least that's what it looks like) appears. It have a text input field and an OK and a Cancel button. The title of the window is Referencenumber.
I have searched all the code for this title and can not find it. It also doesn't matter what you put in the input field, it is not put in the final document. And it also doesn't matter whether you press OK or Cancel.
Could you help figure what it is or how I can remove it?
I'm going out on a limb here and guessing it's an ASK or FILLIN field in the document (probably ASK since you're not seeing the result in the document).
Press Alt+F9 to toggle on the field code display then, if you don't see { ASK [other stuff here ] } immediately you can do a Find on: ^d ASK
ASK writes the user input to a bookmark which can then be used (referenced) elsewhere on by the object model. You should be able to simply delete the field and request the input in your form. But do watch out for REF fields referencing the bookmark information. Ctrl+A, F9 (update all the fields in the main story) should show up an ERROR! if the field (and its bookmark) are deleted.
If it's not one of these fields then it could be something popping up from another add-in. But if that's the case you'd see it with other documents, as well...
I have a large form with a image upload field working ok.
Field is defined in model as:
$this->add('filestore/Field_Image','thumbnail_id');
Then I created two tabs inside form:
$tabs=$form->add('Tabs');
$main=$tabs->addTab('General');
$design=$tabs->addTab('Design');
And moved image field to design tab:
$design->add($form->getElement('thumbnail_id'));
Now I can't upload files. When I try I get the following javascript error
Error: cannot call methods on atk4_form prior to initialization; attempted to call method 'submitPlain
Is there any other way to move the field or have upload working again after moving it?
I was trying to use the same method ($design->add($form->getElement('my_element'));) to move a slider into another place on the page. That didn't work - I think it was because the slider input field is not placed on the page the same way as other input fields.
So I tried with the jQuery appendTo-method (I found the hint in a comment from romanish in a documentation page). That worked. But then I experienced the same problem as you - and in the end I gave up and solved the problem by editing the slider-class page.
So I can't help you, sorry, but I guess this points out that there is a general problem related to getting input from moved form elements.
I'm trying to put TinyMCE on my website. I figured out how to get it to show up, but I'm lost on how to process the content. In their example, they just have a link that references the top of the page and clicking on it somehow magically causes their dump.php script to execute. I don't understand what's going on here. Here is the link:
http://www.tinymce.com/tryit/basic.php
The "Submit" button at the bottom is really a link in a span element with href="#". The form action is dump.php. I want to know how they configured this to run without an actual submit button. Any help in understanding this is greatly appreciated!
To Get Content From Tinymce You Can Use GetContent Method of Currently ActiveEditor Instance
tinyMCE.activeEditor.getContent();
method is used to getting Content .. to Set The Content
tinyMCE.activeEditor.setContent("I Want Text To Be in Tinymce");
to find a perticular element in tinymce get body and find element
var body = tinyMCE.activeEditor.getBody();
$(body).find("#elem_id")
to get a full html
tinyMCE.activeEditor.getDoc().documentElement.innerHTML
hope that helps ..
Since I use PHP, I found this which is also useful:
http://www.tinymce.com/wiki.php/TinyMCE3x:How-to_implement_TinyMCE_in_PHP