Is it posible in code to check on iPhone/iPad if the system time is automatic (NITZ from carrier, NTP or GPS set by OS) or set manually by user?
I would connect to ntp.apple.com and compare the system time with the result I get back.
Check out the ios-ntp project for accessing NTP in Obj-C
Hope this helps.
Related
I have a requirement where I need to set the internal clock of iPad from inside my code. I did some google on it with no fruitful result. Is it at all possible to do it and if yes, how ?
I'm afraid you can't using official APIs, it's up to the user to change the time on the device. Moreover, the user can't even control when it's set/updated if it's using Apple's time servers.
You can however maintain your own time inside your app using for example this:
https://code.google.com/p/ios-ntp/
If you really need to change the clock, you might have a look on Cydia, this app for instance can change the device's internal clock connecting to custom NTP servers.
Also, some time ago I read this article about how time synchronisation works on iOS that you might find helpful.
It is not possible unless you jailbreak. That is a setting for the user, not for your app.
In my view, No its not possible. Setting system settings is out of the purview of the iPhone developers' SDK. The API's to access such functions are not documented for users to set.
In my application i want to run an internal clock in background mode [while application is not running in foreground].
The whole functionality will be like this:
The objective is to get the server time to use in the application, because using device time may sometimes cause issues. The issues may be in situations like somebody has changed the user's iPhone time etc. So i am following the below method.
-Running an internal clock in my application background even if the application is not running.
-Communicate with server every 15 minutes to get the real time and run a timer.
-If net is disconnected in between,timer will continue and take the timer time.
My application is heavily depended on this time factor as this is a ticket booking system.Kindly help me to implement this or please confirm whether this is possible or not?
I am developing an iPhone application which involves Ticket Booking System. I registered my application as location based beacuse it is using user's location taken in background for a purpose.
My problem is that i need to run an internal clock in my application in background mode. I need to write the codes for internal clock in core location delegate methods, so that internal clock will also run along with the location bsed services. Will my app get rejected? Is anything wrong in doing like this?
I need to get the correct time to use in my app, so that i am running this internal clock. I can use NSDate, but that will return the device time. Anyone can change the device time. So once somebody chaged, wrong time will affect the smooth functioning of the app. Kindly some body suggest to get the correct time with out running the internal clock ?
Update: Sorry to say my original answer isn't correct. When the device goes to sleep (can happen sometime after it's locked) the internal CPU clock stops ticking, and mach_absolute_time won't update either. Theoretically it will return the exact same value if you call it right before the device went to sleep, and after it awakes.
The best available way I know of to check for date changes is kern.boottime, it holds the boot time, and is modified whenever the system time changes. Among other things, kern.boottime will be updated if the user changes the time, or if the OS changes the time itself according to info from cell towers.
So, in your case, you can take the original time you calculated and modify it according to the modifications in kern.boottime. If you see kern.boottime changed significantly, it may mean that the device was turned off, and in this case you will need to contact the server to ask it for the time until the flight.
Relevant code:
time_t getBootTimeSecs(void)
{
struct timeval boottime;
size_t size = sizeof(boottime);
int ret = sysctlbyname("kern.boottime", &boottime, &size, NULL, 0);
assert(ret == 0);
return boottime.tv_sec;
}
Original (incorrect) answer: You can use mach_absolute_time which isn't affected by date changes made by the user.
When you book the ticket, get the correct date from the server and record mach_absolute_time. Now you will always be able to call mach_absolute_time whenever you want, calculate the difference from the one you recorded initially, and display the correct date.
This will only work as long as the device wasn't shut down, in that case it makes sense for the app to re-connect to the server to get the correct date.
You can also either Local or Push Notifications to alert the user when the target date is getting closer, even if the app isn't running.
apple is support small task for background mode which will work for approximate 10 sec only.
so you can do one thing when app is active then get time form server and update your local time according that.
I think that you can only detect that the date of the iOs device has been changed (using NSSystemClockDidChangeNotification).
I guess you to use this notification and force reload the real date of your application from your server (With a WebService).
EDIT: You can use the systemUptime in NSProcessInfo:
NSLog(#"ProcessInfo System uptime: %f",[NSProcessInfo processInfo].systemUptime);
but it will not solve your problem if the Device is restarted.
I think there are 2 ways you can go about solving your problem.
Never use system time. In other words, never call [NSDate date] in your code. When you need the current time, call an NTP server. This will of course cause latency in your app, but will guarantee accuracy.
When the app launches, or enters foreground, verify that the system time is reasonably accurate against an NTP server. If the system time is off by more than your tolerance level, then do not let them continue running the app until they address it. If the system time is okay, then start monitoring to ensure they don't change the system time while running the app (NSSystemClockDidChangeNotification). If they pass the initial check, but the move the clock forward, you can catch that and disable the app til they change it back to being accurate.
Here is an iOS NTP implementation which could be helpful in implementing either solution above. http://code.google.com/p/ios-ntp/
EDIT: The Ticketmaster app uses technique #2, so this seems like a reasonable solution for a ticketing app that requires your system time to be correct.
timezone settings should not affect time as in UTC
your app cannot run in the background. Abusing the location requirement for this will cause your app to be rejected by Apple
so my suggestion: do the logic server side with push notification
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
Internal clock in iPhone background mode
I am developing an iPhone application which involves Ticket Booking System. I registered my application as location based beacuse it is using user's location taken in background for a purpose.
My problem is that i need to run an internal clock in my application in background mode. I need to write the codes for internal clock in core location delegate methods, so that internal clock will also run along with the location bsed services. Will my app get rejected? Is anything wrong in doing like this?
I need to get the correct time to use in my app, so that i am running this internal clock. I can use NSDate, but that will return the device time. Anyone can change the device time. So once somebody chaged, wrong time will affect the smooth functioning of the app. Kindly some body suggest to get the correct time with out running the internal clock ?
You can't in background mode.
The only way the device knows what time it is is when the user tells it (yes, there's automatic time updates but that can just be turned off)
If you wanted to know the 'actual' tone, you would have to ask an external source (I guess your server) while your app was running.
However, you might be able to keep track of the time by recording the time stamp each time the location is found in the background. Then when your app is started you can compare them all; if they look odd, compensate for the clock change.
When I try to profile my application with instruments, when it launches, it displays this annoying message:
The device '<my device>' has a date and/or time
set too distant from the host machine.
Please detach the device, set the time correctly,
and then re-attach the device to use with Instruments.
I set the time automatically, and it's the same than my machine. I tried to detach and re attach, to reboot etc... but it keep on happening.
Does anyone have any thoughts as to how to fix this?
Reset your mobile device date time.
I got the same problem,and resolved by reseting my iPad date format for“12h” to “24h”, just like the mac date format.
I need to write an application, that every 10 minutes it should be awaken from suspended mode, get user location via gps and send this information to the server by network.
Depending on the response it should return to the suspended mode or show local notification to the user.
Is there a way to do this on iOS 4?
I've tried different approaches, but the only working for me was to start monitoring user location in backgroind and declare the application as location background application. In that case it worked in background and has a network connection. But this approach takes a lot of power and not accepted cause application should work 24/7.
May be there is a way to write some daemon that should work in background and wake my application every 10 minutes?
Apparently, Pastebot tried to do something similar with the 'audio' multitasking declaration (by playing a silent audiofile) and got rejected.. UNTIL they actually presented a option to the user to pick which audiofile they wanted to play. It's in the appstore now. :)
In this case: What is your reason for not wanting to use the location updates? If battery-usage is a concern, you can use the 'significant location changes only' option, after which you can temporarily change to a more accurate option.
This isn't possible outside of the method you have already tried.
The iPhone background task API will allow you to run a location service in the background.
There is no way to write daemons for the iPhone without jailbreaking, and that is not something I'm able/prepared to help you with.
App store friendly: use new APIs in iOS4, which allows u to make use of GPS location
Anti App store: create a daemon by adding a specific plist file to System/Library/LaunchDaemons/ and put ur app under Applications/. this approach requires a jailbroken iPhone however...
detailed information plz google the following keywords: daemon, multitask, background, etc...
cheers, Lloyd