Duplicated data is coming in my report because source table has duplicate data. Without creating group, I want to hide duplicate data writing expression. So what I did: I select table row and put a expression for hidden property of table row.
The expression was like =(Previous(Fields!ID.Value) = Fields!ID.Value)
but it did not work ... Still duplicate data is showing. So tell me how to suppress duplicate rows in ssrs writing expression not by grouping.
You probably should try these options first:
Try to clean the duplicate data at the source.
Change your source query so the duplicates don't appear in the dataset. (e.g. SELECT DISTINCT)
If not, on the row's Visibility Hidden property you can use the Previous function:
=iif(Fields!YourField.Value = Previous(Fields!YourField.Value), True, False)
You would have to sort on the YourField column for it to work.
I was putting the expression above also until I started using the "Hide Duplicates" line in the properties pane. You basically just select the row, in the dropdown choose your Dataset and that's it. any duplicates will be hidden. Also if you just want to hide certain textboxes duplicates you can do the same as i stated earlier except click on the textbox and not the row. Just another alternative, i'm aware you said using an expression.
You can do it using expression or "Hide Duplicates" options from cell or row properties.
Expressions :
=IIF(Fields!YourField.Value = Previous(Fields!YourField.Value), True, False)
Hide Duplicates Steps:
Select row or cell
Click on F4 key on your Keyboard
Look for "Hide Duplicates"
Choose your DataSet from the dropdownlist
Done, I hope that helps
As an alternative option, you can do it by setting row groups. In a report I was trying to create, the Hide Duplicates property wouldn't behave correctly because of using the same dataset multiple times in a list container.
All you need to do is set the row group properties for the default row group (rightclick the grey row header, and go to Row Group then Group Properties), and add Group expressions on the General tab. Add as many as you need for each field. It's like the Remove Duplicates tool in Microsoft Excel
Sometimes the Hide Duplicates option does apply to the report content. If you add a =Sum(Field!Field_Name.Value) sum around field in the cell, it suppresses the copy from previous record. Of course, strictly speaking this is a solution where the incoming data set has NULL rows for the cells with the issue.
Since the using of Previous function in SSRS compare to the only record previous to it, thus it might cause the duplicate of records still shown if the repeated records not next to each other.
Use the sorting on each table you apply the Previous function, it should resolve the "non next to each other" duplicate records as well.
Related
I have my base record set filtered with a parameter. However, this leaves me with 6 records and I need to filter down to one particular record in each of my sections. If none of the records meet my criteria i cannot suppress the section, it will need to just stay there and blank.
Essentially, I need a method to filter down records that hit one of my sections but not affect the report as a whole.
A few notes:
I cannot use a subreport for this. I need to duplicate this effort over a couple of sections and if I add any more sub reports it just crashes crystal reports (I have a lot of data & a ticket with SAP)
Using a suppression formula hasn't worked yet because I need the section to exist, if it has a null value
Applying no filter doesn't help me because it will duplicate my section 6 times
2 options.
a)
Right Click on white space and choose Insert Group
Choose your field and select specified order or use another record that can filter your data
On the Specified Order Tab click New
Select equal to on the combo box and specified what record you need to be shown
or
b)
Right click on the record
Next to the suppress check box, click on x-2
Here you can create a formula to suppress the records that you don't need.
I'm using Tableau. So, instead of giving the [Column_name], Is it possible to give [Column_number] in column shelf?
- Hariharasudhan. R.
No -- for good reason.
Think of the data source as a template for a potential SQL (or MDX or TQL) query; specifying tables, joins, unions and possibly some where/having clauses for data source filters.
The actual SQL generated for any particular view will be an (optimized) query that only selects columns that are actually needed for that particular view, adds where/having clauses based on the filters being used etc.
So a column doesn't have a fixed number. The same column may be the first field selected in one situation, the last field in another situation, and left off completely in another.
If you want to change the name of column shelf:
Create a duplicate of variable and change original with duplicates and assign name as your wish by right-click on Edit Aliases and change as per your requirement.
Go to Data Source
On the middle right corner check on Show aliases
Go to column and right click on it. Go to Rename
I group my table by 3 attributes, and set page break on every group, and now i want to display that three attribute outside the table. I want to place them on the top of the report, and when i type the expression and i go in run view it's display only the first value, when i go to the next page nothing change
I tried to drag field from table, from data set, and nothing working.
In expression i type
=Fields!My_Field.Value.
Also if some of that three attributes i placed in table it normally displays values, but when i try to move it somewhere it stops displaying.
The issue is that a table is associated with a dataset but a text box is not.
You can reference a field from a text box using the Dataset field ( =Sum(Fields!AMOUNT.Value, "Dataset1") ) but you need to use an aggregate function like First, Last, or SUM.
It sounds like you don't want to use an aggregate since you are grouping by these fields, though.
display the three attribute outside the table
If your trying to display the current grouping in the table at the top of each page, add a new Row in your matrix above your header row and add your group fields there.
I've created a table from a procedure that will display a summary of all incentives from a given collection operation or recruiter in my report. But if the collection operation or recruiter has multiple incentives assigned to their drives during the time period, it will repeat the same collection operation or recruiter on each line. If possible, I'd like to only display the first time it occurs and then leave a blank space until it hits a new collection operation/recruiter.
See screenshot for example:
Is there a way to create an expression to handle this? Thanks,
The answer is Groupings. If you add a row grouping on your "Collection Operation" column it should do a trick. To add a group Right click on your details row. just like you would to add a row. There should be an option to add a parent group. Select that and tell it you want to group on "Collection Operation" and click "Ok". You may have to adjust your formatting a little, but I think this will achieve what you are going for.
I just noticed the recruiter Column. To make that only display once you will need to use an expression. Now that you have a loop you should be able to write an expression that determines your position within the group and blank it out when it isn't the first row.
Is it possible to have add a row to an SSRS 2008 Matrix that spans all of the matrix's columns?
This crude diagram shows roughly what I'm looking for:
The basic idea is that each line item is a person, and each column is a field in a form for that person. The fields themselves are dynamic (and implemented as column groups on the matrix). Additional column groups are included to append non-dynamic form fields, like the time the record was entered and who entered it. Under each person's record is a comments field, which should span all of the form fields above it.
At the moment I have the matrix embedded in another tablix, with the name and fields in the matrix and the comments in the parent tablix. This works for the data (each instance of the matrix ends up being one row), but the header repeats too often (once per person) because it's attached to the matrix. The only thought I have as to how to fix this is to create another matrix in the parent tablix with the same grouping and use it to display the headers... But this will require quite a lot of manual synchronization to keep the two matrices the same.
Edit: The key problem here is making the second row span multiple column groups.
Here's what you can do:
Select the column grouping you want to add above and right click and select
Add Group... Parent Group...
Group the column by something that will not aggregate the data. You'll have to select a field from your dataset to group by so that it creates an overlapping column grouping.
Check the Add group header box
You should now see something similar to this:
Now you just need to move the Value1 field and it's header over under the new column to the right beyond the matrix dividers. Once that's done, simply delete the ungrouped column where you just copied Value1 from and be sure to select Delete columns only checkbox.
Your finished product should look like this:
It is possible - And the above answers are partial answers leaving out one key step: Merging the cells of the child row.
First, right click on your grouped row, then select Insert Row -> Inside Group - Below and you will get two rows with the cells aligning on the columns
Second, ctrl click all the cells in your new row (ie row without the data) then right click on one of the highlighted cells, and then select Merge Cells.
Now you have the table you like. To add a value to the new row: first right click your new (multi column) cell,select Create Placeholder, and then add the dataset item you desire to the placeholder.
[Edit]
After several attempts, I'm going to say this isn't possible in SSRS. The best I could come up with is a group footer that spans columns 1,2, and 3, but not the User column.
[Original Response]
I recently did something similar to this.
First, what tool are you using to create SSRS reports? (I used SQL Server Business Intelligence Development Studio)
You'll want to create a row group (grouped on Person)
Append a row to your table in "Design" view (Right click, "Insert Row --> Inside Group - Below").
Add an expression to the row that pulls the value for your "Comment" column (=Fields!Comment.Value).
Let me know if that helps...
Try adding in you column group "header" with a grouping expression of (1=1). Then a detail field will need to be defined. If you define the other group with correct data then the "header" will stretch across all details columns. You may need to merger depending on other options.
The easiest way to do this is to create a Tablix with only one column, and your row grouping.
Then, you create two rows inside this group.
In the first row inside the group, you insert a Matrix, wich you can then subgroup as you prefer.
I just had a similar problem, and this was my solution.
I banged my head against the wall for a lot of time, until i realized the solution to my problem wasn't "making a cell span multiple column groups", but "making a cell split into multiple column groups".
You can accomplish the goal by using a subreport for each person. The subreport will receive the employee id and create the hierarchy for you. Make sure your subreport column widths match the widths of the parent report.