I'm with a project in which I have a UIScrollView inside a UIView. Inside the UIScrollView has to see a list of buttons in 3 columns and X rows. I have the code that displays the buttons, but does not inserted into the UIScrollView, it prints over and does not scroll. Besides this, also cover the TabBar I have in the bottom of the view.
The code of the function that displais the buttons is
for (int y_axis=0; y_axis<=3; y_axis++)
{
for (int x_axis=0; x_axis<=2; x_axis++)
{
UIButton *btn=[[UIButton alloc] initWithFrame:CGRectMake(16+100*x_axis,100.0+115*y_axis,88.0 ,88.0)];
btn.backgroundColor=[UIColor brownColor];
[self.view addSubview:btn];
}
}
How can I do to display this in the UIScrollView? Thanks!!
Assuming you have a UIScrollView scroller, you have to change your last line to this;
[self.scroller addSubview:btn];
If not, you are adding it to the view, and not the scroller. Also, you have to change the scrollers contentsize, which is the X*Y if how much it contains. For it to contain the whole screen and nothing more;
[self.scroller setContentSize:CGSizeMake(320, 480)]
^ ^
Replace that with the width and the height you want to scroll. Each time you add a button below your new buttons, you should update the contentsize.
It's because you are adding buttons on view [self.view addSubview:btn]; not on ScrollView. Try to make a view with all you buttons. and set your view with buttons as contentview of your scrollview .
first you need the UIScrollViewDelegate in your .h file and then also check buttons are subview of yourScrollView or not also you add this button in your scrollview with code like this bellow...
[yourScrollView addSubview:yourbuttonname];
after that in your viewDidLoad method declare contentsize of your scrollview like this...
yourScrollView.contentSize=CGSizeMake(320, anyheight);///here define height which you want to scroll the view...
hope this help you....
:)
Try these steps:
for loop
{
create buttons along with the desired frames;
add those buttons to scrollview;
}
set the content size of the scrollview according to no of rows;
add the scroll view to main view i.e. self.view;
Related
Using storyboard i want to add UITextview in the UIScrollview and the scroll the TextView in the in the screen. please help me...
scroller.contentSize=CGSizeMake(320,846);
[scroller setScrollEnabled:YES];
int GetIndex = [GetSelectedIndex intValue];
label = [firstheading objectAtIndex:GetIndex];
labelheading.text=label;
textviews = [firstdesc objectAtIndex:GetIndex];
textview.text=textviews;
[scroller addSubview:textview];
NSLog(#"textview:%#",textview);
NSLog(#"image:%#",getimage);
Just a suggestion, you could try adding a UIView on your ViewController first.
Then drag the UIScrollView into your UIView.
Then drag a UITextView into that.
I have this arrangement in a Storyboard - because I have an image in the top level UIView as well as the UIScrollView
My UIScrollView is a ~4500px horizontal view that the user needs to scroll horizontally through to view the content.
I have set it up as follows:
- (void)viewDidLoad
{
[super viewDidLoad];
sview.frame = CGRectMake(0, 0, 568, 320);
sview.contentSize = CGSizeMake(4500, 320);
[sview setScrollEnabled:YES];
}
Yet the scroll view does nothing. Is there something obvious I missed? i've tried literally every tutorial on the web.
I got similar issue. I did following modifications and the scrollView started scrolling for me:
Select to check the 'Bounce Horizontally' property for UIScrollView
in xib.
Move the code following code to viewDidAppear instead of
viewDidLoad:
-(void) viewDidAppear:(BOOL)animated
{
[super viewDidAppear:animated];
sview.frame = CGRectMake(0, 0, 568, 320);
sview.contentSize = CGSizeMake(4500, 320);
[sview setScrollEnabled:YES];
}
I think this should help you.
I've explained it here, but there are so many answers to this problem that suggests turning off Auto Layout. That fixes the problem but that's not really the correct solution. Here's my answer:
Turning Auto Layout works, but that's not the solution. If you really need Auto Layout, then use it, if you don't need it, turn it off. But that is not the correct fix for this solution.
UIScrollView works differently with other views in Auto Layout. Here is Apple's release note on Auto Layout, I've copied the interesting bit:
Here are some notes regarding Auto Layout support for UIScrollView:
In general, Auto Layout considers the top, left, bottom, and right edges of a view to be the visible edges. That is, if you pin a view to
the left edge of its superview, you’re really pinning it to the
minimum x-value of the superview’s bounds. Changing the bounds origin
of the superview does not change the position of the view.
The UIScrollView class scrolls its content by changing the origin of its bounds. To make this work with Auto Layout, the top, left, bottom,
and right edges within a scroll view now mean the edges of its content
view.
The constraints on the subviews of the scroll view must result in a size to fill, which is then interpreted as the content size of the
scroll view. (This should not be confused with the
intrinsicContentSize method used for Auto Layout.) To size the scroll
view’s frame with Auto Layout, constraints must either be explicit
regarding the width and height of the scroll view, or the edges of the
scroll view must be tied to views outside of its subtree.
Note that you can make a subview of the scroll view appear to float (not scroll) over the other scrolling content by creating constraints
between the view and a view outside the scroll view’s subtree, such as
the scroll view’s superview.
Apple then goes on to show example of how to correctly use UIScrollView with Auto Layout.
As a general rule, one of the easiest fix is to create a constraint between the element to the bottom of the UIScrollView. So in the element that you want to be at the bottom of the UIScrollView, create this bottom space constraint:
Once again, if you do not want to use Auto Layout, then turn it off. You can then set the contentSize the usual way. But what you should understand is that this is an intended behaviour of Auto Layout.
First of all you have to add some content to UIScrollSiew as subview for scrolling,without content on UIScrollView how can you scroll?. Here is what i did,just add UIImageView to UIScrollView as subview of size same as size of UIScrollView...
In viewDidLoad method try the following code..
-(void)viewDidLoad
{
UIScrollView *scroll=[[UIScrollView alloc] init];
scroll.frame=CGRectMake(0, 0, 320, 460);
UIImageView *imageView=[[UIImageView alloc] init];
imageView.frame=CGRectMake(0, 0, 320,460);
imageView.image=[UIImage imageNamed:#"chiranjeevi.jpeg"];
scroll.contentSize = CGSizeMake(4500, 460);
[scroll setScrollEnabled:YES];
[scroll addSubview:imageView];
[self.view addSubview:scroll];
}
I tested this code it works well.I hope this code will be helpful to you..
I assume you are adding UISrollingView in your Xib file. This will work for you.
sview.delegate = self;
sview.backgroundColor=[UIColor clearColor];
[sview setCanCancelContentTouches:NO];
sview.indicatorStyle = UIScrollViewIndicatorStyleWhite;
sview.clipsToBounds = YES;
sview.scrollEnabled = YES;
sview.contentSize = CGSizeMake(320,570);
CGPoint topOffset = CGPointMake(0,0);
[sview setContentOffset:topOffset animated:YES];
Also, make sure to give IBOutlet connection in your Xib file.
I also faced the same issue.I added the scroll view in xib.I also added some subviews to this scroll view. The scroll view would stop scrolling after I added the subviews. The solution for this problem was in the xib for the view in file inspector Use Autolayout was checked. I unchecked it and the scroll view scrolled after adding the subviews.
The solution was uncheking the Use Autolayout in file inspector in xib.
I am new to iPad developer,
I made one Registration form in my application, when i see my application in Portrait mode,
i am able to see whole form with no scrolling, but when i see same form in Landscape mode, i am not able to see part which is at bottom of page, for that a scrolling should be there to see bottom part.
:
In my .h file when i replace
#interface ReminderPage : UIViewController{
...
...
}
:UIViewController with :UIScrollView
and then when i add label in my .m file like this,
UILabel *Lastpaidlbl = [[[UILabel alloc] initWithFrame:CGRectMake(70 ,400, 130, 50)]autorelease];
Lastpaidlbl.backgroundColor = [UIColor greenColor];
Lastpaidlbl.font=[UIFont systemFontOfSize:20];
Lastpaidlbl.text = #"Lastpaid on :";
[self.view addSubview:Lastpaidlbl];
I am getting error on last line Property view not found on object of type classname.
i am unable to add label in my view.
Any help will be appreciated.
The question appears to be really asking how can all the components on the screen be placed inside a UIScrollView, rather than a UIView. Using Xcode 4.6.3, I found I could achieve this by simply:
In Interface Builder, select all the sub-views inside the main UIView.
Choose Xcode menu item "Editor | Embed In | Scroll View".
The end result was a new scroll view embedded in the existing main UIView, will all the former sub-views of the UIView now as sub-views of the UIScrollView, with the same positioning.
If you want to replace your UIViewController with a UIScrollView, you will have to go a bit of refactoring to your code. The error you get is just an example of that:
the syntax:
[self.view addSubview:Lastpaidlbl];
is correct if self is a UIViewController; since you changed it to be UIScrollView, you should now do:
[self addSubview:Lastpaidlbl];
You will have quite a few changes like this one to make to your code and will face some issues.
Another approach would be this:
instantiate a UIScrollView (not derive from it);
add your UIView (such as you have defined it) to the scroll view;
define the contentSize of the scroll view so to include the whole UIView you have.
The scroll view acts as a container for your existing view (you add your controls to the scroll view, then add the scroll view to self.view); this way, you could integrate it within your existing controller:
1. UIScrollView* scrollView = <alloc/init>
2. [self.view addSubview:scrollView]; (in your controller)
3. [scrollView addSubview:<label>]; (for all of your labels and fields).
4. scrollView.contentSize = xxx;
I think the latter approach will be much easier.
Please put all of your UIComponents to the UIScrollview and then it will start scrolling.
please look in to content size. please change it according to the orientation of device.
You're subclassing UIScrollView, so there is no self.view because already self is the view (of the scrollview). You dont need to subclass the scrollview, you can just embed your components in a ivar scrollview and set its contentSize (in your case, you have to enable the scrolling just when the device is in landscape mode). In interface builder you can embed the selected elements in one click, Editor-> Embed in-> scrollview.
First create scrollview
UIScrollView * scr=[[UIScrollView alloc] initWithFrame:CGRectMake(10, 70, 756, 1000)];
scr.backgroundColor=[UIColor clearColor];
[ self.view addSubview:scr];
second
change [self.view addSubview:Lastpaidlbl];
to
[scr addSubview:Lastpaidlbl];
third
set height depends on content
UIView *view = nil;
NSArray *subviews = [scr subviews];
CGFloat curXLoc = 0;
for (view in subviews)
{
CGRect frame = view.frame;
curXLoc += (frame.size.height);
}
// set the content size so it can be scrollable
[scr setContentSize:CGSizeMake(756, curXLoc)];
Finally
- (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation {
// Override to allow orientations other than the default portrait orientation.
if (interfaceOrientation==UIInterfaceOrientationLandscapeLeft || interfaceOrientation==UIInterfaceOrientationLandscapeRight) {
self.scr.frame = CGRectMake(0, 0, 703,768);
} else {
self.scr.frame = CGRectMake(0, 0, 768, 1024);
}
return YES;
}
I created a segmentedControl and add it as subView during viewDidLoad. I faced a problem whereby it doesn't scroll.
How do I add a subView to be inside the scrollView?
Thanks.
Figured out...
[scrollView addSubview:segmentedControl];
[scrollView addSubview:segmentedControl];
scrollView.contentSize = CGSizeMake(s.frame.size.width, 1000);
change height accordingly your segmentedControl height.
if your segmentedControl is fit in scrollview it would not scroll.
I am pretty new to iphone programming. I just started about a month ago and have only been tinkering with small tutorial type applications but anyways, here is my question.
I currently have a UIScrollView thats scrollable and zoomable, that loads a UIImageView subview, and i want to add in some controls(UIButtons) over the image view but when i zoom in and out the whole group(the buttons and the image) zoom togeather.
If I add the UIButtons to my UIScrollView and zoom, the image zooms and the buttons stay in origional place
If I add the UIButtons to my UIImageView they zoom correctly but arent buttons anymore. IE they lose their interactivity.
Later ill add lots of buttons into an array and add them.
I would appreciate any help i can get
This is part of my mainViewController.m:
- (void)viewDidLoad
{
[scrollView2 setBackgroundColor:[UIColor blackColor]];
[scrollView2 setCanCancelContentTouches:NO];
scrollView2.clipsToBounds = YES; // default is NO, we want to restrict drawing within our scrollview
scrollView2.indicatorStyle = UIScrollViewIndicatorStyleWhite;
scroll2ImageView = [[UIImageView alloc] initWithImage:[UIImage imageNamed:#"bigNH.jpg"]];
[scrollView2 addSubview:scroll2ImageView];
[scrollView2 setContentSize:CGSizeMake(scroll2ImageView.frame.size.width, scroll2ImageView.frame.size.height)];
scrollView2.minimumZoomScale = .5;
scrollView2.maximumZoomScale = 3;
scrollView2.delegate = self;
[scrollView2 setScrollEnabled:YES];
UIButton *myButton = [UIButton buttonWithType:UIButtonTypeCustom];
CGRect newSize = CGRectMake(658, 435, 50, 50); // position in the parent view and set the size of the button
myButton.frame = newSize;
[myButton setImage:[UIImage imageNamed:#"redStop.png"] forState:UIControlStateNormal];
// add targets and actions
[myButton addTarget:self action:#selector(buttonClicked:) forControlEvents:UIControlEventTouchUpInside];
// add to a view
[scroll2ImageView addSubview:myButton];
[redLineArray addObject:myButton];
[scroll2ImageView release];
}
This might not help and it is not what it appears that you want to do.
However, when I want buttons associated with a scrollview, I add a parent view, add the buttons to that view and also add the scrollview to that view. The button(s) and the scrollview would be siblings. This allows the user to scroll around the contents of the scrollview, while insuring that the buttons are always in view.
-isdi-
By default, UIImageView has userInteraction disabled. Have you changed this?
Also, I would be really uneasy adding subviews to an UIImageView, it's really meant to hold one image. It would be better to create a normal UIView and add the UIButtons and UIImageView to that. It's very easy to control the ordering so that the buttons appears on top of the image.
P.S. Just to make your life easier, instead of :
[scrollView2 setContentSize:CGSizeMake(scroll2ImageView.frame.size.width, scroll2ImageView.frame.size.height)];
You can use :
[scrollView2 setContentSize:scroll2ImageView.frame.size];
Make a single view to contain all your zoomable content (everything it would appear), and call it say contentView. Now place everything you want in that contentView, the imageView and all your buttons etc.
In your UIScrollView delegate place this: (Be sure to set the scrollView's delegate if you haven't already)
- (UIView *)viewForZoomingInScrollView:(UIScrollView *)scrollView {
return self.contentView;
}
Only one view is allowed to zoom, but that one view can however contain other views that will scale because they're child views.
Also be sure to set the scrollView's contentSize value to the exact size of your zoomable contentView.