How to connect two query results? - postgresql

I want to retrieve all ids within a certain timespan. The timestamps however,
are stored in a different table:
Table A has column my_id
Table B has columns my_id, timestamp
I would want something like
SELECT
id,
time
FROM
(SELECT my_id AS id FROM A) q1,
(SELECT timestamp AS time FROM B WHERE my_id = id) q2
;
But how can I get the value of id within a different subquery? Is there
an elegant solution for this problem?

I see that in the second subquery you try to link the two tables:
(SELECT my_id AS id FROM A) q1,
(SELECT timestamp AS time FROM B WHERE my_id = id) q2
If both ids must be equals:
SELECT a.my_id as id, b.timestamp as time
FROM A a
JOIN B b ON (a.my_id = b.my_id);
I hope this helps.

Simpler:
SELECT my_id AS id, b.my_ts
FROM a
JOIN b USING (my_id);
FROM A a (like has been advised) is nonsense because, I quote the manual:
Quoting an identifier also makes it case-sensitive, whereas unquoted
names are always folded to lower case.
While being allowed in PostgreSQL, the type names time and timestamp are reserved words in every SQL standard and should not be used as identifiers.
USING is a syntactical shorthand, mostly.

Related

postgresql selecting the most representative value

I have a table in which objects have ids and they have names. The ids are correct by definition, the names are almost always correct, but sometimes dirty incoming data causes names to be null or even wrong.
So I do a query like
SELECT id, name, AGGR1(a) as a, AGGR2(b) as b, AGGR3(c) as c
FROM my_table
WHERE d = 3
GROUP BY id
I'd like to have name in the results, but of course the above is wrong. I'd have to group on id, name, in which case what should be one row sometimes becomes more than one -- say, id 2 has names 'John' (correct), 'Jon' (no, but only 1%), or NULL (also a small fraction).
Is there a construct or idiom in postgresql that lets me select what a human looking at the list would say is obviously the consensus name?
(I hear our postgres installation is finally being upgraded soon, if that matters here.)
sample output, in case prose wasn't clear
SELECT id, name, COUNT(id) as c
FROM my_table
WHERE d = 3
GROUP BY id
id name c
2 John 2000
2 Jon 3
2 (NULL) 5
vs
id name c
2 John 2008
You can get the names with
WITH names as (
SELECT
id,
name,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY COUNT(1) DESC) as rn
FROM my_table
GROUP BY id, name
)
SELECT id, name
FROM names
WHERE rn=1;
and then do your calculations by id only, joining names from this query.

How to find the distinct row of max value which have unique phone number [duplicate]

Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
This question already has answers here:
Retrieving the last record in each group - MySQL
(33 answers)
Closed 3 years ago.
I have this table for documents (simplified version here):
id
rev
content
1
1
...
2
1
...
1
2
...
1
3
...
How do I select one row per id and only the greatest rev?
With the above data, the result should contain two rows: [1, 3, ...] and [2, 1, ..]. I'm using MySQL.
Currently I use checks in the while loop to detect and over-write old revs from the resultset. But is this the only method to achieve the result? Isn't there a SQL solution?
At first glance...
All you need is a GROUP BY clause with the MAX aggregate function:
SELECT id, MAX(rev)
FROM YourTable
GROUP BY id
It's never that simple, is it?
I just noticed you need the content column as well.
This is a very common question in SQL: find the whole data for the row with some max value in a column per some group identifier. I heard that a lot during my career. Actually, it was one the questions I answered in my current job's technical interview.
It is, actually, so common that Stack Overflow community has created a single tag just to deal with questions like that: greatest-n-per-group.
Basically, you have two approaches to solve that problem:
Joining with simple group-identifier, max-value-in-group Sub-query
In this approach, you first find the group-identifier, max-value-in-group (already solved above) in a sub-query. Then you join your table to the sub-query with equality on both group-identifier and max-value-in-group:
SELECT a.id, a.rev, a.contents
FROM YourTable a
INNER JOIN (
SELECT id, MAX(rev) rev
FROM YourTable
GROUP BY id
) b ON a.id = b.id AND a.rev = b.rev
Left Joining with self, tweaking join conditions and filters
In this approach, you left join the table with itself. Equality goes in the group-identifier. Then, 2 smart moves:
The second join condition is having left side value less than right value
When you do step 1, the row(s) that actually have the max value will have NULL in the right side (it's a LEFT JOIN, remember?). Then, we filter the joined result, showing only the rows where the right side is NULL.
So you end up with:
SELECT a.*
FROM YourTable a
LEFT OUTER JOIN YourTable b
ON a.id = b.id AND a.rev < b.rev
WHERE b.id IS NULL;
Conclusion
Both approaches bring the exact same result.
If you have two rows with max-value-in-group for group-identifier, both rows will be in the result in both approaches.
Both approaches are SQL ANSI compatible, thus, will work with your favorite RDBMS, regardless of its "flavor".
Both approaches are also performance friendly, however your mileage may vary (RDBMS, DB Structure, Indexes, etc.). So when you pick one approach over the other, benchmark. And make sure you pick the one which make most of sense to you.
My preference is to use as little code as possible...
You can do it using IN
try this:
SELECT *
FROM t1 WHERE (id,rev) IN
( SELECT id, MAX(rev)
FROM t1
GROUP BY id
)
to my mind it is less complicated... easier to read and maintain.
I am flabbergasted that no answer offered SQL window function solution:
SELECT a.id, a.rev, a.contents
FROM (SELECT id, rev, contents,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) ranked_order
FROM YourTable) a
WHERE a.ranked_order = 1
Added in SQL standard ANSI/ISO Standard SQL:2003 and later extended with ANSI/ISO Standard SQL:2008, window (or windowing) functions are available with all major vendors now. There are more types of rank functions available to deal with a tie issue: RANK, DENSE_RANK, PERSENT_RANK.
Yet another solution is to use a correlated subquery:
select yt.id, yt.rev, yt.contents
from YourTable yt
where rev =
(select max(rev) from YourTable st where yt.id=st.id)
Having an index on (id,rev) renders the subquery almost as a simple lookup...
Following are comparisons to the solutions in #AdrianCarneiro's answer (subquery, leftjoin), based on MySQL measurements with InnoDB table of ~1million records, group size being: 1-3.
While for full table scans subquery/leftjoin/correlated timings relate to each other as 6/8/9, when it comes to direct lookups or batch (id in (1,2,3)), subquery is much slower then the others (Due to rerunning the subquery). However I couldnt differentiate between leftjoin and correlated solutions in speed.
One final note, as leftjoin creates n*(n+1)/2 joins in groups, its performance can be heavily affected by the size of groups...
I can't vouch for the performance, but here's a trick inspired by the limitations of Microsoft Excel. It has some good features
GOOD STUFF
It should force return of only one "max record" even if there is a tie (sometimes useful)
It doesn't require a join
APPROACH
It is a little bit ugly and requires that you know something about the range of valid values of the rev column. Let us assume that we know the rev column is a number between 0.00 and 999 including decimals but that there will only ever be two digits to the right of the decimal point (e.g. 34.17 would be a valid value).
The gist of the thing is that you create a single synthetic column by string concatenating/packing the primary comparison field along with the data you want. In this way, you can force SQL's MAX() aggregate function to return all of the data (because it has been packed into a single column). Then you have to unpack the data.
Here's how it looks with the above example, written in SQL
SELECT id,
CAST(SUBSTRING(max(packed_col) FROM 2 FOR 6) AS float) as max_rev,
SUBSTRING(max(packed_col) FROM 11) AS content_for_max_rev
FROM (SELECT id,
CAST(1000 + rev + .001 as CHAR) || '---' || CAST(content AS char) AS packed_col
FROM yourtable
)
GROUP BY id
The packing begins by forcing the rev column to be a number of known character length regardless of the value of rev so that for example
3.2 becomes 1003.201
57 becomes 1057.001
923.88 becomes 1923.881
If you do it right, string comparison of two numbers should yield the same "max" as numeric comparison of the two numbers and it's easy to convert back to the original number using the substring function (which is available in one form or another pretty much everywhere).
Unique Identifiers? Yes! Unique identifiers!
One of the best ways to develop a MySQL DB is to have each id AUTOINCREMENT (Source MySQL.com). This allows a variety of advantages, too many to cover here. The problem with the question is that its example has duplicate ids. This disregards these tremendous advantages of unique identifiers, and at the same time, is confusing to those familiar with this already.
Cleanest Solution
DB Fiddle
Newer versions of MySQL come with ONLY_FULL_GROUP_BY enabled by default, and many of the solutions here will fail in testing with this condition.
Even so, we can simply select DISTINCT someuniquefield, MAX( whateverotherfieldtoselect ), ( *somethirdfield ), etc., and have no worries understanding the result or how the query works :
SELECT DISTINCT t1.id, MAX(t1.rev), MAX(t2.content)
FROM Table1 AS t1
JOIN Table1 AS t2 ON t2.id = t1.id AND t2.rev = (
SELECT MAX(rev) FROM Table1 t3 WHERE t3.id = t1.id
)
GROUP BY t1.id;
SELECT DISTINCT Table1.id, max(Table1.rev), max(Table2.content) : Return DISTINCT somefield, MAX() some otherfield, the last MAX() is redundant, because I know it's just one row, but it's required by the query.
FROM Employee : Table searched on.
JOIN Table1 AS Table2 ON Table2.rev = Table1.rev : Join the second table on the first, because, we need to get the max(table1.rev)'s comment.
GROUP BY Table1.id: Force the top-sorted, Salary row of each employee to be the returned result.
Note that since "content" was "..." in OP's question, there's no way to test that this works. So, I changed that to "..a", "..b", so, we can actually now see that the results are correct:
id max(Table1.rev) max(Table2.content)
1 3 ..d
2 1 ..b
Why is it clean? DISTINCT(), MAX(), etc., all make wonderful use of MySQL indices. This will be faster. Or, it will be much faster, if you have indexing, and you compare it to a query that looks at all rows.
Original Solution
With ONLY_FULL_GROUP_BY disabled, we can use still use GROUP BY, but then we are only using it on the Salary, and not the id:
SELECT *
FROM
(SELECT *
FROM Employee
ORDER BY Salary DESC)
AS employeesub
GROUP BY employeesub.Salary;
SELECT * : Return all fields.
FROM Employee : Table searched on.
(SELECT *...) subquery : Return all people, sorted by Salary.
GROUP BY employeesub.Salary: Force the top-sorted, Salary row of each employee to be the returned result.
Unique-Row Solution
Note the Definition of a Relational Database: "Each row in a table has its own unique key." This would mean that, in the question's example, id would have to be unique, and in that case, we can just do :
SELECT *
FROM Employee
WHERE Employee.id = 12345
ORDER BY Employee.Salary DESC
LIMIT 1
Hopefully this is a solution that solves the problem and helps everyone better understand what's happening in the DB.
Another manner to do the job is using MAX() analytic function in OVER PARTITION clause
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,MAX(rev) OVER (PARTITION BY id) as max_rev
FROM YourTable
) t
WHERE t.rev = t.max_rev
The other ROW_NUMBER() OVER PARTITION solution already documented in this post is
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) rank
FROM YourTable
) t
WHERE t.rank = 1
This 2 SELECT work well on Oracle 10g.
MAX() solution runs certainly FASTER that ROW_NUMBER() solution because MAX() complexity is O(n) while ROW_NUMBER() complexity is at minimum O(n.log(n)) where n represent the number of records in table !
Something like this?
SELECT yourtable.id, rev, content
FROM yourtable
INNER JOIN (
SELECT id, max(rev) as maxrev
FROM yourtable
GROUP BY id
) AS child ON (yourtable.id = child.id) AND (yourtable.rev = maxrev)
I like to use a NOT EXIST-based solution for this problem:
SELECT
id,
rev
-- you can select other columns here
FROM YourTable t
WHERE NOT EXISTS (
SELECT * FROM YourTable t WHERE t.id = id AND rev > t.rev
)
This will select all records with max value within the group and allows you to select other columns.
SELECT *
FROM Employee
where Employee.Salary in (select max(salary) from Employee group by Employe_id)
ORDER BY Employee.Salary
Note: I probably wouldn't recommend this anymore in MySQL 8+ days. Haven't used it in years.
A third solution I hardly ever see mentioned is MySQL specific and looks like this:
SELECT id, MAX(rev) AS rev
, 0+SUBSTRING_INDEX(GROUP_CONCAT(numeric_content ORDER BY rev DESC), ',', 1) AS numeric_content
FROM t1
GROUP BY id
Yes it looks awful (converting to string and back etc.) but in my experience it's usually faster than the other solutions. Maybe that's just for my use cases, but I have used it on tables with millions of records and many unique ids. Maybe it's because MySQL is pretty bad at optimizing the other solutions (at least in the 5.0 days when I came up with this solution).
One important thing is that GROUP_CONCAT has a maximum length for the string it can build up. You probably want to raise this limit by setting the group_concat_max_len variable. And keep in mind that this will be a limit on scaling if you have a large number of rows.
Anyway, the above doesn't directly work if your content field is already text. In that case you probably want to use a different separator, like \0 maybe. You'll also run into the group_concat_max_len limit quicker.
I think, You want this?
select * from docs where (id, rev) IN (select id, max(rev) as rev from docs group by id order by id)
SQL Fiddle :
Check here
NOT mySQL, but for other people finding this question and using SQL, another way to resolve the greatest-n-per-group problem is using Cross Apply in MS SQL
WITH DocIds AS (SELECT DISTINCT id FROM docs)
SELECT d2.id, d2.rev, d2.content
FROM DocIds d1
CROSS APPLY (
SELECT Top 1 * FROM docs d
WHERE d.id = d1.id
ORDER BY rev DESC
) d2
Here's an example in SqlFiddle
I would use this:
select t.*
from test as t
join
(select max(rev) as rev
from test
group by id) as o
on o.rev = t.rev
Subquery SELECT is not too eficient maybe, but in JOIN clause seems to be usable. I'm not an expert in optimizing queries, but I've tried at MySQL, PostgreSQL, FireBird and it does work very good.
You can use this schema in multiple joins and with WHERE clause. It is my working example (solving identical to yours problem with table "firmy"):
select *
from platnosci as p
join firmy as f
on p.id_rel_firmy = f.id_rel
join (select max(id_obj) as id_obj
from firmy
group by id_rel) as o
on o.id_obj = f.id_obj and p.od > '2014-03-01'
It is asked on tables having teens thusands of records, and it takes less then 0,01 second on really not too strong machine.
I wouldn't use IN clause (as it is mentioned somewhere above). IN is given to use with short lists of constans, and not as to be the query filter built on subquery. It is because subquery in IN is performed for every scanned record which can made query taking very loooong time.
Since this is most popular question with regard to this problem, I'll re-post another answer to it here as well:
It looks like there is simpler way to do this (but only in MySQL):
select *
from (select * from mytable order by id, rev desc ) x
group by id
Please credit answer of user Bohemian in this question for providing such a concise and elegant answer to this problem.
Edit: though this solution works for many people it may not be stable in the long run, since MySQL doesn't guarantee that GROUP BY statement will return meaningful values for columns not in GROUP BY list. So use this solution at your own risk!
If you have many fields in select statement and you want latest value for all of those fields through optimized code:
select * from
(select * from table_name
order by id,rev desc) temp
group by id
How about this:
SELECT all_fields.*
FROM (SELECT id, MAX(rev) FROM yourtable GROUP BY id) AS max_recs
LEFT OUTER JOIN yourtable AS all_fields
ON max_recs.id = all_fields.id
This solution makes only one selection from YourTable, therefore it's faster. It works only for MySQL and SQLite(for SQLite remove DESC) according to test on sqlfiddle.com. Maybe it can be tweaked to work on other languages which I am not familiar with.
SELECT *
FROM ( SELECT *
FROM ( SELECT 1 as id, 1 as rev, 'content1' as content
UNION
SELECT 2, 1, 'content2'
UNION
SELECT 1, 2, 'content3'
UNION
SELECT 1, 3, 'content4'
) as YourTable
ORDER BY id, rev DESC
) as YourTable
GROUP BY id
Here is a nice way of doing that
Use following code :
with temp as (
select count(field1) as summ , field1
from table_name
group by field1 )
select * from temp where summ = (select max(summ) from temp)
I like to do this by ranking the records by some column. In this case, rank rev values grouped by id. Those with higher rev will have lower rankings. So highest rev will have ranking of 1.
select id, rev, content
from
(select
#rowNum := if(#prevValue = id, #rowNum+1, 1) as row_num,
id, rev, content,
#prevValue := id
from
(select id, rev, content from YOURTABLE order by id asc, rev desc) TEMP,
(select #rowNum := 1 from DUAL) X,
(select #prevValue := -1 from DUAL) Y) TEMP
where row_num = 1;
Not sure if introducing variables makes the whole thing slower. But at least I'm not querying YOURTABLE twice.
here is another solution hope it will help someone
Select a.id , a.rev, a.content from Table1 a
inner join
(SELECT id, max(rev) rev FROM Table1 GROUP BY id) x on x.id =a.id and x.rev =a.rev
None of these answers have worked for me.
This is what worked for me.
with score as (select max(score_up) from history)
select history.* from score, history where history.score_up = score.max
Here's another solution to retrieving the records only with a field that has the maximum value for that field. This works for SQL400 which is the platform I work on. In this example, the records with the maximum value in field FIELD5 will be retrieved by the following SQL statement.
SELECT A.KEYFIELD1, A.KEYFIELD2, A.FIELD3, A.FIELD4, A.FIELD5
FROM MYFILE A
WHERE RRN(A) IN
(SELECT RRN(B)
FROM MYFILE B
WHERE B.KEYFIELD1 = A.KEYFIELD1 AND B.KEYFIELD2 = A.KEYFIELD2
ORDER BY B.FIELD5 DESC
FETCH FIRST ROW ONLY)
Sorted the rev field in reverse order and then grouped by id which gave the first row of each grouping which is the one with the highest rev value.
SELECT * FROM (SELECT * FROM table1 ORDER BY id, rev DESC) X GROUP BY X.id;
Tested in http://sqlfiddle.com/ with the following data
CREATE TABLE table1
(`id` int, `rev` int, `content` varchar(11));
INSERT INTO table1
(`id`, `rev`, `content`)
VALUES
(1, 1, 'One-One'),
(1, 2, 'One-Two'),
(2, 1, 'Two-One'),
(2, 2, 'Two-Two'),
(3, 2, 'Three-Two'),
(3, 1, 'Three-One'),
(3, 3, 'Three-Three')
;
This gave the following result in MySql 5.5 and 5.6
id rev content
1 2 One-Two
2 2 Two-Two
3 3 Three-Two
You can make the select without a join when you combine the rev and id into one maxRevId value for MAX() and then split it back to original values:
SELECT maxRevId & ((1 << 32) - 1) as id, maxRevId >> 32 AS rev
FROM (SELECT MAX(((rev << 32) | id)) AS maxRevId
FROM YourTable
GROUP BY id) x;
This is especially fast when there is a complex join instead of a single table. With the traditional approaches the complex join would be done twice.
The above combination is simple with bit functions when rev and id are INT UNSIGNED (32 bit) and combined value fits to BIGINT UNSIGNED (64 bit). When the id & rev are larger than 32-bit values or made of multiple columns, you need combine the value into e.g. a binary value with suitable padding for MAX().
Explanation
This is not pure SQL. This will use the SQLAlchemy ORM.
I came here looking for SQLAlchemy help, so I will duplicate Adrian Carneiro's answer with the python/SQLAlchemy version, specifically the outer join part.
This query answers the question of:
"Can you return me the records in this group of records (based on same id) that have the highest version number".
This allows me to duplicate the record, update it, increment its version number, and have the copy of the old version in such a way that I can show change over time.
Code
MyTableAlias = aliased(MyTable)
newest_records = appdb.session.query(MyTable).select_from(join(
MyTable,
MyTableAlias,
onclause=and_(
MyTable.id == MyTableAlias.id,
MyTable.version_int < MyTableAlias.version_int
),
isouter=True
)
).filter(
MyTableAlias.id == None,
).all()
Tested on a PostgreSQL database.
I used the below to solve a problem of my own. I first created a temp table and inserted the max rev value per unique id.
CREATE TABLE #temp1
(
id varchar(20)
, rev int
)
INSERT INTO #temp1
SELECT a.id, MAX(a.rev) as rev
FROM
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as a
GROUP BY a.id
ORDER BY a.id
I then joined these max values (#temp1) to all of the possible id/content combinations. By doing this, I naturally filter out the non-maximum id/content combinations, and am left with the only max rev values for each.
SELECT a.id, a.rev, content
FROM #temp1 as a
LEFT JOIN
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as b on a.id = b.id and a.rev = b.rev
GROUP BY a.id, a.rev, b.content
ORDER BY a.id

How to update counts by date in table A with the counts by date returned from join of table B and table C

I can do this using a temporary table. Is it possible to do these two steps in a single update query?
All possible dates already exist in the TargetTable (no inserts are necessary).
I'm hoping to make this more efficient since it is run often as batches of data periodically pour into table T2.
Table T1: list of individual dates inserted or updated in this batch
Table T2: datetime2(3) field followed by several data fields, may be thousands for any particular date
Goal: update TargetTable: date field followed by int field to hold the total records by date (may have just come in to T2 or may be additional records appended to existing records already in T2)
select T1.date as TargetDate, count(*) as CountF1
into #Temp
from T1 inner join T2
on T1.date = cast(T2.DateTime as date)
group by T1.date
update TargetTable
set TargetField1 = CountF1
from #Temp inner join TargetTable
on TargetDate = TargetTable.Date
I agree with the recommendation of Zohar Peled. Use a "Common Table Expression" which is often abbreviated as "CTE". A CTE can replace the temporary table in your scenario. You write a CTE by using the WITH keyword, and remember that in many cases you will need to have a semicolon before the WITH keyword (or at the end of the previous statement, if you prefer). The solution then looks like this:
;WITH CTE AS
(
SELECT T1.date AS TargetDate, Count(*) AS CountF1
FROM T1 INNER JOIN T2
ON T1.date = Cast(T2.DateTime AS DATE)
GROUP BY T1.date
)
UPDATE TargetTable
SET TargetField1 = CTE.CountF1
FROM CTE INNER JOIN TargetTable
ON CTE.TargetDate = TargetTable.Date;
Here is more information on Common Table Expressions:
https://learn.microsoft.com/en-us/sql/t-sql/queries/with-common-table-expression-transact-sql
After having done this, then another thing you might benefit from is to add a new column to table T2, with the datatype DATE. This new column could have the value of Cast(T2.DateTime AS DATE). It might even be a (persisted) computed column. Then add an index on that new column. If you then join on the new column (instead of joining on the expression Cast(...) ) it might run faster depending on the distribution of the data. The only way to tell if it runs faster is to try it out.

MySQL Between advise [duplicate]

Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
This question already has answers here:
Retrieving the last record in each group - MySQL
(33 answers)
Closed 3 years ago.
I have this table for documents (simplified version here):
id
rev
content
1
1
...
2
1
...
1
2
...
1
3
...
How do I select one row per id and only the greatest rev?
With the above data, the result should contain two rows: [1, 3, ...] and [2, 1, ..]. I'm using MySQL.
Currently I use checks in the while loop to detect and over-write old revs from the resultset. But is this the only method to achieve the result? Isn't there a SQL solution?
At first glance...
All you need is a GROUP BY clause with the MAX aggregate function:
SELECT id, MAX(rev)
FROM YourTable
GROUP BY id
It's never that simple, is it?
I just noticed you need the content column as well.
This is a very common question in SQL: find the whole data for the row with some max value in a column per some group identifier. I heard that a lot during my career. Actually, it was one the questions I answered in my current job's technical interview.
It is, actually, so common that Stack Overflow community has created a single tag just to deal with questions like that: greatest-n-per-group.
Basically, you have two approaches to solve that problem:
Joining with simple group-identifier, max-value-in-group Sub-query
In this approach, you first find the group-identifier, max-value-in-group (already solved above) in a sub-query. Then you join your table to the sub-query with equality on both group-identifier and max-value-in-group:
SELECT a.id, a.rev, a.contents
FROM YourTable a
INNER JOIN (
SELECT id, MAX(rev) rev
FROM YourTable
GROUP BY id
) b ON a.id = b.id AND a.rev = b.rev
Left Joining with self, tweaking join conditions and filters
In this approach, you left join the table with itself. Equality goes in the group-identifier. Then, 2 smart moves:
The second join condition is having left side value less than right value
When you do step 1, the row(s) that actually have the max value will have NULL in the right side (it's a LEFT JOIN, remember?). Then, we filter the joined result, showing only the rows where the right side is NULL.
So you end up with:
SELECT a.*
FROM YourTable a
LEFT OUTER JOIN YourTable b
ON a.id = b.id AND a.rev < b.rev
WHERE b.id IS NULL;
Conclusion
Both approaches bring the exact same result.
If you have two rows with max-value-in-group for group-identifier, both rows will be in the result in both approaches.
Both approaches are SQL ANSI compatible, thus, will work with your favorite RDBMS, regardless of its "flavor".
Both approaches are also performance friendly, however your mileage may vary (RDBMS, DB Structure, Indexes, etc.). So when you pick one approach over the other, benchmark. And make sure you pick the one which make most of sense to you.
My preference is to use as little code as possible...
You can do it using IN
try this:
SELECT *
FROM t1 WHERE (id,rev) IN
( SELECT id, MAX(rev)
FROM t1
GROUP BY id
)
to my mind it is less complicated... easier to read and maintain.
I am flabbergasted that no answer offered SQL window function solution:
SELECT a.id, a.rev, a.contents
FROM (SELECT id, rev, contents,
ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) ranked_order
FROM YourTable) a
WHERE a.ranked_order = 1
Added in SQL standard ANSI/ISO Standard SQL:2003 and later extended with ANSI/ISO Standard SQL:2008, window (or windowing) functions are available with all major vendors now. There are more types of rank functions available to deal with a tie issue: RANK, DENSE_RANK, PERSENT_RANK.
Yet another solution is to use a correlated subquery:
select yt.id, yt.rev, yt.contents
from YourTable yt
where rev =
(select max(rev) from YourTable st where yt.id=st.id)
Having an index on (id,rev) renders the subquery almost as a simple lookup...
Following are comparisons to the solutions in #AdrianCarneiro's answer (subquery, leftjoin), based on MySQL measurements with InnoDB table of ~1million records, group size being: 1-3.
While for full table scans subquery/leftjoin/correlated timings relate to each other as 6/8/9, when it comes to direct lookups or batch (id in (1,2,3)), subquery is much slower then the others (Due to rerunning the subquery). However I couldnt differentiate between leftjoin and correlated solutions in speed.
One final note, as leftjoin creates n*(n+1)/2 joins in groups, its performance can be heavily affected by the size of groups...
I can't vouch for the performance, but here's a trick inspired by the limitations of Microsoft Excel. It has some good features
GOOD STUFF
It should force return of only one "max record" even if there is a tie (sometimes useful)
It doesn't require a join
APPROACH
It is a little bit ugly and requires that you know something about the range of valid values of the rev column. Let us assume that we know the rev column is a number between 0.00 and 999 including decimals but that there will only ever be two digits to the right of the decimal point (e.g. 34.17 would be a valid value).
The gist of the thing is that you create a single synthetic column by string concatenating/packing the primary comparison field along with the data you want. In this way, you can force SQL's MAX() aggregate function to return all of the data (because it has been packed into a single column). Then you have to unpack the data.
Here's how it looks with the above example, written in SQL
SELECT id,
CAST(SUBSTRING(max(packed_col) FROM 2 FOR 6) AS float) as max_rev,
SUBSTRING(max(packed_col) FROM 11) AS content_for_max_rev
FROM (SELECT id,
CAST(1000 + rev + .001 as CHAR) || '---' || CAST(content AS char) AS packed_col
FROM yourtable
)
GROUP BY id
The packing begins by forcing the rev column to be a number of known character length regardless of the value of rev so that for example
3.2 becomes 1003.201
57 becomes 1057.001
923.88 becomes 1923.881
If you do it right, string comparison of two numbers should yield the same "max" as numeric comparison of the two numbers and it's easy to convert back to the original number using the substring function (which is available in one form or another pretty much everywhere).
Unique Identifiers? Yes! Unique identifiers!
One of the best ways to develop a MySQL DB is to have each id AUTOINCREMENT (Source MySQL.com). This allows a variety of advantages, too many to cover here. The problem with the question is that its example has duplicate ids. This disregards these tremendous advantages of unique identifiers, and at the same time, is confusing to those familiar with this already.
Cleanest Solution
DB Fiddle
Newer versions of MySQL come with ONLY_FULL_GROUP_BY enabled by default, and many of the solutions here will fail in testing with this condition.
Even so, we can simply select DISTINCT someuniquefield, MAX( whateverotherfieldtoselect ), ( *somethirdfield ), etc., and have no worries understanding the result or how the query works :
SELECT DISTINCT t1.id, MAX(t1.rev), MAX(t2.content)
FROM Table1 AS t1
JOIN Table1 AS t2 ON t2.id = t1.id AND t2.rev = (
SELECT MAX(rev) FROM Table1 t3 WHERE t3.id = t1.id
)
GROUP BY t1.id;
SELECT DISTINCT Table1.id, max(Table1.rev), max(Table2.content) : Return DISTINCT somefield, MAX() some otherfield, the last MAX() is redundant, because I know it's just one row, but it's required by the query.
FROM Employee : Table searched on.
JOIN Table1 AS Table2 ON Table2.rev = Table1.rev : Join the second table on the first, because, we need to get the max(table1.rev)'s comment.
GROUP BY Table1.id: Force the top-sorted, Salary row of each employee to be the returned result.
Note that since "content" was "..." in OP's question, there's no way to test that this works. So, I changed that to "..a", "..b", so, we can actually now see that the results are correct:
id max(Table1.rev) max(Table2.content)
1 3 ..d
2 1 ..b
Why is it clean? DISTINCT(), MAX(), etc., all make wonderful use of MySQL indices. This will be faster. Or, it will be much faster, if you have indexing, and you compare it to a query that looks at all rows.
Original Solution
With ONLY_FULL_GROUP_BY disabled, we can use still use GROUP BY, but then we are only using it on the Salary, and not the id:
SELECT *
FROM
(SELECT *
FROM Employee
ORDER BY Salary DESC)
AS employeesub
GROUP BY employeesub.Salary;
SELECT * : Return all fields.
FROM Employee : Table searched on.
(SELECT *...) subquery : Return all people, sorted by Salary.
GROUP BY employeesub.Salary: Force the top-sorted, Salary row of each employee to be the returned result.
Unique-Row Solution
Note the Definition of a Relational Database: "Each row in a table has its own unique key." This would mean that, in the question's example, id would have to be unique, and in that case, we can just do :
SELECT *
FROM Employee
WHERE Employee.id = 12345
ORDER BY Employee.Salary DESC
LIMIT 1
Hopefully this is a solution that solves the problem and helps everyone better understand what's happening in the DB.
Another manner to do the job is using MAX() analytic function in OVER PARTITION clause
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,MAX(rev) OVER (PARTITION BY id) as max_rev
FROM YourTable
) t
WHERE t.rev = t.max_rev
The other ROW_NUMBER() OVER PARTITION solution already documented in this post is
SELECT t.*
FROM
(
SELECT id
,rev
,contents
,ROW_NUMBER() OVER (PARTITION BY id ORDER BY rev DESC) rank
FROM YourTable
) t
WHERE t.rank = 1
This 2 SELECT work well on Oracle 10g.
MAX() solution runs certainly FASTER that ROW_NUMBER() solution because MAX() complexity is O(n) while ROW_NUMBER() complexity is at minimum O(n.log(n)) where n represent the number of records in table !
Something like this?
SELECT yourtable.id, rev, content
FROM yourtable
INNER JOIN (
SELECT id, max(rev) as maxrev
FROM yourtable
GROUP BY id
) AS child ON (yourtable.id = child.id) AND (yourtable.rev = maxrev)
I like to use a NOT EXIST-based solution for this problem:
SELECT
id,
rev
-- you can select other columns here
FROM YourTable t
WHERE NOT EXISTS (
SELECT * FROM YourTable t WHERE t.id = id AND rev > t.rev
)
This will select all records with max value within the group and allows you to select other columns.
SELECT *
FROM Employee
where Employee.Salary in (select max(salary) from Employee group by Employe_id)
ORDER BY Employee.Salary
Note: I probably wouldn't recommend this anymore in MySQL 8+ days. Haven't used it in years.
A third solution I hardly ever see mentioned is MySQL specific and looks like this:
SELECT id, MAX(rev) AS rev
, 0+SUBSTRING_INDEX(GROUP_CONCAT(numeric_content ORDER BY rev DESC), ',', 1) AS numeric_content
FROM t1
GROUP BY id
Yes it looks awful (converting to string and back etc.) but in my experience it's usually faster than the other solutions. Maybe that's just for my use cases, but I have used it on tables with millions of records and many unique ids. Maybe it's because MySQL is pretty bad at optimizing the other solutions (at least in the 5.0 days when I came up with this solution).
One important thing is that GROUP_CONCAT has a maximum length for the string it can build up. You probably want to raise this limit by setting the group_concat_max_len variable. And keep in mind that this will be a limit on scaling if you have a large number of rows.
Anyway, the above doesn't directly work if your content field is already text. In that case you probably want to use a different separator, like \0 maybe. You'll also run into the group_concat_max_len limit quicker.
I think, You want this?
select * from docs where (id, rev) IN (select id, max(rev) as rev from docs group by id order by id)
SQL Fiddle :
Check here
NOT mySQL, but for other people finding this question and using SQL, another way to resolve the greatest-n-per-group problem is using Cross Apply in MS SQL
WITH DocIds AS (SELECT DISTINCT id FROM docs)
SELECT d2.id, d2.rev, d2.content
FROM DocIds d1
CROSS APPLY (
SELECT Top 1 * FROM docs d
WHERE d.id = d1.id
ORDER BY rev DESC
) d2
Here's an example in SqlFiddle
I would use this:
select t.*
from test as t
join
(select max(rev) as rev
from test
group by id) as o
on o.rev = t.rev
Subquery SELECT is not too eficient maybe, but in JOIN clause seems to be usable. I'm not an expert in optimizing queries, but I've tried at MySQL, PostgreSQL, FireBird and it does work very good.
You can use this schema in multiple joins and with WHERE clause. It is my working example (solving identical to yours problem with table "firmy"):
select *
from platnosci as p
join firmy as f
on p.id_rel_firmy = f.id_rel
join (select max(id_obj) as id_obj
from firmy
group by id_rel) as o
on o.id_obj = f.id_obj and p.od > '2014-03-01'
It is asked on tables having teens thusands of records, and it takes less then 0,01 second on really not too strong machine.
I wouldn't use IN clause (as it is mentioned somewhere above). IN is given to use with short lists of constans, and not as to be the query filter built on subquery. It is because subquery in IN is performed for every scanned record which can made query taking very loooong time.
Since this is most popular question with regard to this problem, I'll re-post another answer to it here as well:
It looks like there is simpler way to do this (but only in MySQL):
select *
from (select * from mytable order by id, rev desc ) x
group by id
Please credit answer of user Bohemian in this question for providing such a concise and elegant answer to this problem.
Edit: though this solution works for many people it may not be stable in the long run, since MySQL doesn't guarantee that GROUP BY statement will return meaningful values for columns not in GROUP BY list. So use this solution at your own risk!
If you have many fields in select statement and you want latest value for all of those fields through optimized code:
select * from
(select * from table_name
order by id,rev desc) temp
group by id
How about this:
SELECT all_fields.*
FROM (SELECT id, MAX(rev) FROM yourtable GROUP BY id) AS max_recs
LEFT OUTER JOIN yourtable AS all_fields
ON max_recs.id = all_fields.id
This solution makes only one selection from YourTable, therefore it's faster. It works only for MySQL and SQLite(for SQLite remove DESC) according to test on sqlfiddle.com. Maybe it can be tweaked to work on other languages which I am not familiar with.
SELECT *
FROM ( SELECT *
FROM ( SELECT 1 as id, 1 as rev, 'content1' as content
UNION
SELECT 2, 1, 'content2'
UNION
SELECT 1, 2, 'content3'
UNION
SELECT 1, 3, 'content4'
) as YourTable
ORDER BY id, rev DESC
) as YourTable
GROUP BY id
Here is a nice way of doing that
Use following code :
with temp as (
select count(field1) as summ , field1
from table_name
group by field1 )
select * from temp where summ = (select max(summ) from temp)
I like to do this by ranking the records by some column. In this case, rank rev values grouped by id. Those with higher rev will have lower rankings. So highest rev will have ranking of 1.
select id, rev, content
from
(select
#rowNum := if(#prevValue = id, #rowNum+1, 1) as row_num,
id, rev, content,
#prevValue := id
from
(select id, rev, content from YOURTABLE order by id asc, rev desc) TEMP,
(select #rowNum := 1 from DUAL) X,
(select #prevValue := -1 from DUAL) Y) TEMP
where row_num = 1;
Not sure if introducing variables makes the whole thing slower. But at least I'm not querying YOURTABLE twice.
here is another solution hope it will help someone
Select a.id , a.rev, a.content from Table1 a
inner join
(SELECT id, max(rev) rev FROM Table1 GROUP BY id) x on x.id =a.id and x.rev =a.rev
None of these answers have worked for me.
This is what worked for me.
with score as (select max(score_up) from history)
select history.* from score, history where history.score_up = score.max
Here's another solution to retrieving the records only with a field that has the maximum value for that field. This works for SQL400 which is the platform I work on. In this example, the records with the maximum value in field FIELD5 will be retrieved by the following SQL statement.
SELECT A.KEYFIELD1, A.KEYFIELD2, A.FIELD3, A.FIELD4, A.FIELD5
FROM MYFILE A
WHERE RRN(A) IN
(SELECT RRN(B)
FROM MYFILE B
WHERE B.KEYFIELD1 = A.KEYFIELD1 AND B.KEYFIELD2 = A.KEYFIELD2
ORDER BY B.FIELD5 DESC
FETCH FIRST ROW ONLY)
Sorted the rev field in reverse order and then grouped by id which gave the first row of each grouping which is the one with the highest rev value.
SELECT * FROM (SELECT * FROM table1 ORDER BY id, rev DESC) X GROUP BY X.id;
Tested in http://sqlfiddle.com/ with the following data
CREATE TABLE table1
(`id` int, `rev` int, `content` varchar(11));
INSERT INTO table1
(`id`, `rev`, `content`)
VALUES
(1, 1, 'One-One'),
(1, 2, 'One-Two'),
(2, 1, 'Two-One'),
(2, 2, 'Two-Two'),
(3, 2, 'Three-Two'),
(3, 1, 'Three-One'),
(3, 3, 'Three-Three')
;
This gave the following result in MySql 5.5 and 5.6
id rev content
1 2 One-Two
2 2 Two-Two
3 3 Three-Two
You can make the select without a join when you combine the rev and id into one maxRevId value for MAX() and then split it back to original values:
SELECT maxRevId & ((1 << 32) - 1) as id, maxRevId >> 32 AS rev
FROM (SELECT MAX(((rev << 32) | id)) AS maxRevId
FROM YourTable
GROUP BY id) x;
This is especially fast when there is a complex join instead of a single table. With the traditional approaches the complex join would be done twice.
The above combination is simple with bit functions when rev and id are INT UNSIGNED (32 bit) and combined value fits to BIGINT UNSIGNED (64 bit). When the id & rev are larger than 32-bit values or made of multiple columns, you need combine the value into e.g. a binary value with suitable padding for MAX().
Explanation
This is not pure SQL. This will use the SQLAlchemy ORM.
I came here looking for SQLAlchemy help, so I will duplicate Adrian Carneiro's answer with the python/SQLAlchemy version, specifically the outer join part.
This query answers the question of:
"Can you return me the records in this group of records (based on same id) that have the highest version number".
This allows me to duplicate the record, update it, increment its version number, and have the copy of the old version in such a way that I can show change over time.
Code
MyTableAlias = aliased(MyTable)
newest_records = appdb.session.query(MyTable).select_from(join(
MyTable,
MyTableAlias,
onclause=and_(
MyTable.id == MyTableAlias.id,
MyTable.version_int < MyTableAlias.version_int
),
isouter=True
)
).filter(
MyTableAlias.id == None,
).all()
Tested on a PostgreSQL database.
I used the below to solve a problem of my own. I first created a temp table and inserted the max rev value per unique id.
CREATE TABLE #temp1
(
id varchar(20)
, rev int
)
INSERT INTO #temp1
SELECT a.id, MAX(a.rev) as rev
FROM
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as a
GROUP BY a.id
ORDER BY a.id
I then joined these max values (#temp1) to all of the possible id/content combinations. By doing this, I naturally filter out the non-maximum id/content combinations, and am left with the only max rev values for each.
SELECT a.id, a.rev, content
FROM #temp1 as a
LEFT JOIN
(
SELECT id, content, SUM(rev) as rev
FROM YourTable
GROUP BY id, content
) as b on a.id = b.id and a.rev = b.rev
GROUP BY a.id, a.rev, b.content
ORDER BY a.id

PostgreSQL: custom logic for determining distinct rows?

Here's my problem. Suppose I have a table called persons containing, among other things, fields for the person's name and national identification number, with the latter being optional. There can be multiple rows for each actual person.
Now suppose I want to select exactly one row for each actual person. For the purposes of the application, two rows are considered to refer to the same person if a) their ID numbers match, or b) their names match and the ID number of one or both is NULL. SELECT DISTINCT is no good here: I cannot do a DISTINCT ON (name, id) because then two rows with the same name where the ID of one is NULL wouldn't match (which is incorrect, they should be considered the same). I cannot do a DISTINCT ON (name) because then rows with the same name but different IDs would match (again incorrect, they should be considered different). And I cannot do a DISTINCT ON (id) because then all the rows where ID is NULL would be considered the same (obviously incorrect).
Is there any way to redefine the way PostgreSQL compares rows to determine whether or not they're identical? I guess the default behaviour for DISTINCT ON (name, id) would be something like IF a.name = b.name AND a.id = b.id THEN IDENTICAL ELSE DISTINCT. I'd like to redefine it to something like IF a.id = b.id OR (a.name = b.name AND (a.id IS NULL OR b.id IS NULL)) THEN IDENTICAL ELSE DISTINCT.
It's pretty late and I might have missed something obvious, so other suggestions on how to achieve what I want would also be welcome. Anything to enable me to select distinct rows based on more complex criteria than a simple list of columns. Thanks in advance.
With Window Functions
--
-- First, SELECT those names with NULL national IDs not shadowed by the same
-- name with a national ID. Each one is a unique person.
--
SELECT name, id
FROM persons
WHERE NOT EXISTS (SELECT 1
FROM persons p
WHERE p.name = persons.name AND p.id IS NOT NULL)
--
-- Second, collapse each national ID into the "first" row with that ID,
-- whatever the name. Each ID is a unique person.
--
UNION ALL
SELECT name, id
FROM (SELECT name, id, ROW_NUMBER() OVER (PARTITION BY id)
FROM persons
WHERE id IS NOT NULL) d
WHERE d.row_number = 1;
Without Window Functions
Replace the above UNION with a GROUP BY the first (MIN()) name for each non-NULL id:
...
UNION ALL
SELECT MIN(name) AS name, id
FROM persons
WHERE id IS NOT NULL
GROUP BY id
It seems like the main problem is the layout of your database. I don't know the details of your specific application, but having multiple rows and null IDs for the same person is usually a bad idea. If possible you may want to consider creating a separate table for any of the information that requires multiple rows, with persons only containing one row per person and a unique identifier for each row.
But, if you can't do that... I don't think just a distinct is going to solve this problem.
What's the problem with:
select distinct name, id
from persons
where id is not null
Do you have some persons that have a name, but not an ID? Or do you need some specific data from the other rows?
Here's another problem: if there are two rows with the same name and null IDs, and multiple people with the same name and different IDs, how do you know which person the null rows match?