Using CoffeeScript and Docco, sections are created in the generated HTML which can then be used as links eg.
geometry.html#section-82
Does anyone know if there is a way to name these sections so it could instead be (for example):
geometry.html#vector
EDIT: It would seem this can be achieved by simply adding in the HTML manually:
**MARKDOWN**
# ## <section id='vector'>Vector:</section>
but is there any other, perhaps more elegant ways?
Currently the best way I can find to do this is as follows:
# ## <section id='vector'>Vector:</section>
It seems to work pretty well, wish I could add it to Markdown though.
Related
When I export the xml file of a multiple choice question, it contains the following lines:
<idnumber>arbitrary_id_set_by_user</idnumber>
<answernumbering>ABCD</answernumbering>
<tag></tag>
Is there a way to add idnumber, answernumbering and tag to the metainformation section of the question so that r-exams can export to moodle XML as <idnumber>idnumber</idnumber>,<answernumbering>ABCD</answernumbering>, <tag>tag1</tag>, and <tag>tag2</tag> etc?
The <answernumbering> tag can be set in exams2moodle() via the answernumbering= argument, see ?exams2moodle. The reason for this is that this is set in the same way for all exercises in a quiz. This is more consistent than setting it individually and potentially inconsistently in the meta-information of the different exercises.
The <idnumber> tag appears to be used by Moodle only for internal purposes. It is also not mentioned in the official Moodle XML documentation at https://docs.moodle.org/311/en/Moodle_XML_format. Hence we did not implement it in exams2moodle().
The <tag> is currently not supported in exams2moodle() because we felt that it would be more important to have tags in the Rmd (or Rnw) exercise itself and not the Moodle version of the exercise. For structuring the content on the Moodle side the exsection meta-information can be used, see boxhist for a worked example.
Finally, you can add arbitrary metainformation by using the exextra tag. This is used, for example, in the essayreg exercise template. However, there is no general way of using this extra metainformation to insert additional XML code in the exams2moodle() output. To do that, the source code underlying exams2moodle() would have to be adapted correspondingly.
I'm working on a theme for Wyam and I'm wondering if there's a way to set the layout that should be used in the markdown file for a particular page. As far as I have seen so far, it seems that each page created with markdown uses _Layout.cshtml
To be more specific. I'm creating an "about.md" page, which has a different layout then then other (default) pages.
So what I would like to do is use metadata to select the layout. For example
Layout: _About.cshtml
or
Layout: _About
Is this possible with Wyam?
In A Razor File
Pages in the Wyam recipes (I'm assuming you're using either the blog or docs recipe) are processed by Razor. The use of a _Layout.cshtml is by convention in the recipe, but alternate layouts can be specified using standard Razor syntax. You can do so by placing the following at the top of the about page .cshtml file (under your front matter):
#{
Layout = "_About.cshtml";
}
In A Markdown File
Markdown files are also processed by the Razor engine, so the technique above would work if it weren't for the Markdown processor escaping the # symbol. There's really no good way around that, and the simple answer to your question is you can't specify an alternate layout for a Markdown file.
However, one of the advantages of using a code-driven generator like Wyam is that you have a lot of control. In this case, you can replace the RenderPages pipeline with one that will do exactly what you want. Add the following to your wyam.config file:
int index = Pipelines.IndexOf(Blog.RenderPages);
Pipelines.Remove(Blog.RenderPages);
Pipelines.Insert(index, Blog.RenderPages,
(IPipeline)new Wyam.Web.Pipelines.RenderPages(
Blog.RenderPages,
new Wyam.Web.Pipelines.RenderPagesSettings
{
Pipelines = new string[] { "Pages" },
Layout = (doc, ctx) => doc.String("Layout", "/_Layout.cshtml")
}));
Then you'll be able to add a "Layout" value as front matter exactly like you wrote in your question.
This was a good idea in general, so I've also opened an issue to add this behavior to the recipe by default.
First, here is the Typoscript :
20 = TEXT
20 {
value {
field = field_title
wrap = |.txt
}
filelink {
stdWrap.wrap = <li>|</li>
path = fileadmin/txt-files/
}
}
The result I get is :
<li>
<a href="/fileadmin/txt-files/Title.txt">
<img src="typo3/sysext/frontend/Resources/Public/Icons/FileIcons/txt.png">
</a>
</li>
And what I need is :
<li>
<a href="/fileadmin/force_download_script.php?filepath=/fileadmin/txt-files/Title.txt">
<img src="typo3/sysext/frontend/Resources/Public/Icons/FileIcons/txt.png">
</a>
</li>
I need to make the link downloadable, rather than opening the file in the browser. For that I have a force_download_script.php, but when I do that :
wrap = fileadmin/force_download_script.php?filepath=|txt
instead of the current wrap, filelink doesn't find the file anymore.
I have tried using ATagBeforeWrap.wrap but it doesn't look like it's made for that purpose. I also tried typolinkConfiguration.wrap without any success.
Any idea of how to achieve that ? Using a COA maybe ?
Thank you !
I would not do this with a script, but with server configuration. If you use Apache and have .htaccess enabled, you can add the configuration to a .htaccess file in the directory where the files are located. See https://css-tricks.com/snippets/htaccess/force-files-to-download-not-open-in-browser/
Alternatively you can also use the HTML5 download attribute. This is not supported by Internet Explorer however (it is supported by Edge though).
The issue can get quite a bit complicated, but step by step:
your code above might be wrong if it's not just a copy & paste fault:
wrap = fileadmin/force_download_script.php?filepath=|.txt
The dot before txt was missing.
Nevertheless it is still interesting if the php-script is triggered.
It's possible that the script is not triggered due to some settings in typo3conf/LocalConfiguration.php respectively some settings in the install-tool.
Depending on the TYPO3-Version it's also possible that the script is not triggered at all because all scripts are being required now in an extension. That means you might need to create an extension for that script.
Also simple wrapping of the result with the script-path might not be enough, but you have to call it explicitly by TypoScript perhaps by including the script as user-function or lib.
The admin-panel might be useful to debug some things about your script but if not you've to include some debug-output first in your own code, if that's not enough in the core (temporary).
So you've to find out if your script is triggered and if not, the reason for it.
Are you sure .filelink is what you are looking for?
.filelink is for a set of files. For all files in the folder given by .path a link will be generated. see manual
From your description you want a text wrapped with a link to one single file. That would be more a problem for .typolink where you specify the link in .parameter.
if you really want a link list of multiple files, each wrapped with your script you need to modify .typolinkConfiguration.parameter which will be used internaly by .filelink.
Anyway it might be possible to do a wrap which then would be:
.typolinkConfiguration.parameter.wrap = /fileadmin/force_download_script.php?|
Maybe it is easier to build your list with .stdWrap.filelist, where you can use the filenames in any way to wrap your own href parameter for an A-tag.
To use the TYPO3 core solution with file links you can use this guide:
Create a file storage where you want your "secured" files in TYPO3 backend
Do not set the checkbox "Is public?" in the storage record
The links will be rendered with eID and file parameters
You can look into the FileDumpController handling these links: https://github.com/TYPO3/TYPO3.CMS/blob/2348992f8e3045610636666af096911436fa1c89/typo3/sysext/core/Classes/Controller/FileDumpController.php
You can use the included hook to extend this controller with your logic.
Unfortunately I can't find any official documentation for this feature, but will post it when I find something or wrote it myself. ;)
Maybe this can help you, too: https://extensions.typo3.org/extension/fal_securedownload/
Here is the official part, but it's not much: https://docs.typo3.org/typo3cms/CoreApiReference/ApiOverview/Fal/Administration/Storages.html?highlight=filedumpcontroller
In my mark-up I want to add a space ( ) between elements without always having to use CSS to do so. If I put in my markup, GWT throws errors. Is there a way around it?
For example:
<g:Label>One </g:Label><g:Label>Two</g:Label>
Should show:
One Two
And not:
OneTwo
As documented here, you just have to add this to the top of your XML file and it will work!
<!DOCTYPE ui:UiBinder SYSTEM "http://dl.google.com/gwt/DTD/xhtml.ent">
Note that the GWT compiler won't actually visit this URL to fetch the file, because a copy of it is baked into the compiler. However, your IDE may fetch it.
Rather than use a Label, which to me shouldn't allow character entities at all, I use an HTML widget. In order to set the content, though, I find I have to do it as the HTML attribute, not the body content (note that the uppercase HTML is important here, since the set method is setHTML, not setHtml)
<g:HTML HTML="One " />
I have a need to create a <br/> tag in the display label for a menu item generated using Zend_navigation, but don't seem to be able to find a way to do so.
My navigation item is defined in the XML config as:
<registermachine>
<label>Register your Slitter Rewinder</label>
<controller>service</controller>
<action>register</action>
<route>default</route>
</registermachine>
I want to force a tag in the output HTML between 'your' and 'slitter', such that it appears on two line as below:
Register your
Slitter Rewinder
However, I can't seem to do it. obviously using in the XML breaks parsing, and using html entities means that the lable is displayed as:
Register your <br/>Slitter Rewinder
Has anyone had experience of this that can offer advice?
Thanks in advance!
there is no such option built-in you have to use a partial
$partial = array('menu.phtml', 'default');
$this->navigation()->menu()->setPartial($partial);
echo $this->navigation()->menu()->render();
http://framework.zend.com/manual/en/zend.view.helpers.html#zend.view.helpers.initial.navigation.menu
you may also try a hack with <label><![CDATA[Menu label<br/>Second line]]></label>
I found a (hacky) solution:
I updated my navigation.xml to use {br} tokens wherever a <br/> tag is required, and then amended the base Zend/View/Helper/Navigation/Menu.php file as follows:
within htmlify function, changed
$this->view->escape($label)
to
str_replace("{br}", "<br/>", $label)
I could (and probably will) override the Zend Library Menu View Helper with my own at some point, but this at least cover it for now.
there is a escapeLabels boolean used to convert html tags and it's true by default.
You can set your navigation like this
$this->navigation()
->menu()
->escapeLabels(false)
->...
http://framework.zend.com/apidoc/2.0/classes/Zend.View.Helper.Navigation.Menu.html#escapeLabels