I am trying the simplest example I can, pulled directly from their website. Here is my entire html file, with code taken exactly from https://peerjs.com/index.html:
<script src="https://unpkg.com/peerjs#1.3.1/dist/peerjs.min.js"></script>
<script>
var peer = new Peer();
var conn = peer.connect('another-peers-id');
// on open will be launch when you successfully connect to PeerServer
conn.on('open', function(){
// here you have conn.id
conn.send('hi!');
});
</script>
In Chrome and Edge I get this in the console:
peerjs.min.js:64 GET https://0.peerjs.com/peerjs/id?ts=15956160926060.016464029424720694 net::ERR_CONNECTION_REFUSED
In Firefox I get this:
Cross-Origin Request Blocked: The Same Origin Policy disallows reading the remote resource at https://0.peerjs.com/peerjs/id?ts=15956162489620.8436734374800061. (Reason: CORS request did not succeed).
What am I doing wrong?
#reyad has requested "a full trace of requests and responses". Here's what I see in my network tab in Firefox:
And here's Chrome:
And a tiny bit more Chrome:
[Note: It would have been better if you could provide a full trace of requests and responses. This problem may occur for several reasons. I'll state two solutions. So, try those. If those doesn't work, provide full trace of requests and responses.]
1. First Solution:
Sometimes, this type of error occurs because of self-signed certificate. To solve this problem, open developer tools/options, then go to network tab. You'll see a list of requests. Select the request which was failed because of CORS(i.e. which gave you this Reason: CORS request did not succeed). Open it(i.e. click it). If your problem is related to cert you'll see the following error message:
AN ERROR OCCURED: SEC_ERROR_INADEQUATE_KEY_USAGE
To solve this problem, go to url that is the reason of this problem and accept the certificate manually.
2. Second solution:
Check the request(which is the reason of CORS) in the network tab of developers tools/options(same as described in 1. First Solution). You'll find a Transferred column. See, what's written in the Transferred column of the failed request. If it is written Blocked By Some Ad-Blocker, then disable the Ad-Blocker. Your request will work fine.
[P.S.]: These solutions are proposed on assumptions. Hope these works. If these two do not work, then please provide more info about requests and responses. And also check this.
3. Third and final solution:
[Note: This solution may not solve your problem directly, but it'll give you alternative solution and also insight about what your problem is and how to work around it]
Before reading the solution below, read this to understand how Access-Control-Allow-Origin works(it is the reason for CORS error).
Let me first explain how peerjs works:
PEERJS works based on PEER ID. So, you've to get some PEER ID either from the PEERJS CLOUD SERVER or you've to provide yourself one in the PEER CONSTRUCTOR i.e. new Peer("some-peer-id"). Peer id has to be unique, cause its necessary to detect all the users uniquely. And, peerjs uses this PEER ID to send and receive data from user to user.
Now, you should know that, you're using PEERJS CLOUD SERVER to get/generate unique peer id which is the default server PEERJS uses unless you specified some other server to use.
Now let me explain why you're facing this problem:
As you already know how CORS works, you may have already guessed, that https://unpkg.com/peerjs#1.3.1/dist/peerjs.min.js(the downloaded js file) is calling https://0.peerjs.com to retrieve/generate new unique PEER ID. But, this request by https://your.website.com does not have Access-Control-Allow-Origin access for some reason, it may also be a middleware problem. So, its difficult to tell where the problem is actually occuring. But one thing for sure, it's not your fault of writing code :D.
I hope all the concepts is clear to you I've stated above.
Now, to solutions:
Alternative-appraoch-1 (Using PEERJS CLOUD SERVER AND Your own provided id):
In this approach you've to generate your own unique PEER ID. So, "https://your.website.com" does not have to call "https://0.peerjs.com" for unique peer id. [Note: make your peer id large enough so that its always unique, at least 64 chars long]
In this way, you can avoid the CORS problem.
Update:
I just saw an new issue in github, which says the public peerjs cloud server is now unstable or does not work properly. It just gives error like: Firefox cannot establish a connection with the server at the address wss://0.peerjs.com/peerjs?key=peerjs&id=123222589562487856955685485555&token=ocyxworx62i and in Chrome: Error in connection establishment: net::ERR_CONNECTION_REFUSED. For details check here. So, its better, you use your own server(see the next approach).
Alternative-appraoch-2 (Using your own peerjs server):
You can host your own peerjs server instead of PEERJS CLOUD SERVER. In this way, you can allow access to anyone/any website you want. If you want know how to host a peerjs server, you may visit here.
[P.S.]: I have studied pearjs issues in github. After reading all those issues, it seems, it is better to use your own server rather than using pearjs cloud. There are a lot of various problems with each new release of peerjs. And mostly related with connection with peerjs cloud and also peerjs cloud is not stable I guess. They were hosting it in 0.peerjs.com:9000 before(not secure). But now in 0.peerjs.com:443.
I haven't use peerjs before nor set up peerjs server. If you want to set up one, I hope the community would be able help you on how to do that properly.
What I understand from your question is that there is an issue of (CORS => Cross-origin resource sharing ), Maybe what I am suggesting is not very intuitive.
First : download the "https://unpkg.com/peerjs#1.3.1/dist/peerjs.min.js" in your local directory . and then incklude the local javascript code to the html.
like: <script src="./peerjs.min.js"></script>
Second :
you are using var peer = new Peer();
but please provide an extra unique id from your side. for example, I just created a random id and provided it.
StackOverflow link: https://stackoverflow.com/questions/21216758/peerjs-set-your-own-peerid#:~:text=1%20Answer&text=Provide%20a%20peer%20id%20when,to%20under%20Create%20a%20peer.
var a_random_id = Math.random().toString(36).replace(/[^a-z]+/g, '').substr(2, 10);
var peer = new Peer(a_random_id, {key: 'myapikey'});
Third : the best option is to run PeerServer: A server for PeerJS of your own.
If you don't want to develop anything, just enter a few commands below.
Install the package globally:
$ npm install peer -g
Run the server:
$ peerjs --port 9000 --key peerjs --path /myapp
Started PeerServer on ::, port: 9000, path: /myapp (v. 0.3.2)
Check it: http://127.0.0.1:9000/myapp It should return JSON with name, description, and website fields.
details:https://github.com/peers/peerjs-server
I just started using Postman. I had this error "Error: socket hang up" when I was executing a collection runner. I've read a few post regarding socket hang up and it mention about sending a request and there's no response from the server side and probably timeout. How do I extend the length of time of the request in Postman Collection Runner?
For me it was because my application was switched to https and my postman requests still had http in them. Changing postman to https fixed it.
Socket hang up, error is port related error. I am sharing my experience. When you use same port for connecting database, which port is already in use for other service, then "Socket Hang up" error comes out.
eg:- port 6455 is dedicated port for some other service or connection. You cannot use same port (6455) for making a database connection on same server.
Sometimes, this error rises when a client waits for a response for a very long time. This can be resolved using the 202 (Accepted) Http code. This basically means that you will tell the server to start the job you want it to do, and then, every some-time-period check if it has finished the job.
If you are the one who wrote the server, this is relatively easy to implement. If not, check the documentation of the server you're using.
Postman was giving "Could not get response" "Error: socket hang up".
I solved this problem by adding the Content-Length http header to my request
Are you using nodemon, or some other file-watcher? In my case, I was generating some local files, uploading them, then sending the URL back to my user. Unfortunately nodemon would see the "changes" to the project, and trigger a restart before a response was sent. I ignored the build directories from my file-watcher and solved this issue.
Here is the Nodemon readme on ignoring files: https://github.com/remy/nodemon#ignoring-files
I have just faced the same problem and I fixed it by close my VPN. So I guess that's a network agent problem. You can check if you have some network proxy is on.
this happaned when client wait for response for long time
try to sync your API requests from postman
then make login post and your are done
I defined Authenticate method to generate a token and mentioned its return type as nullable string as:
public string? Authenticate(string username, string password)
{
if(!users.Any(u => u.Key==username && u.Value == password))
{
return null;
}
var tokenHandler = new JwtSecurityTokenHandler();
var tokenKey = Encoding.ASCII.GetBytes(key);
var tokenDescriptor = new SecurityTokenDescriptor()
{
Subject = new ClaimsIdentity(new Claim[]
{
new Claim(ClaimTypes.Name, username)
}),
Expires = DateTime.UtcNow.AddHours(1),
SigningCredentials = new SigningCredentials(new
SymmetricSecurityKey(tokenKey),
SecurityAlgorithms.HmacSha256Signature)
};
var token = tokenHandler.CreateToken(tokenDescriptor);
return tokenHandler.WriteToken(token);
}
Changing nullable string to simply string fixed "Socket Hang Up" issue for me!
If Postman doesn't get response within a specified time it will throw the error "socket hang up".
I was doing something like below to achieve 60 minutes of delay between each scenario in a collection:
get https://postman-echo.com/delay/10
pre request script :-
setTimeout(function(){}, [50000]);
I reduced time duration to 30 seconds:
setTimeout(function(){}, [20000]);
After that I stopped getting this error.
I solved this problem with disconnection my vpn. you should check if there is vpn connected.
What helped for me was replacing 'localhost' in the url to http://127.0.0.1 or whatever other address your local machine has assigned localhost to.
Socket hang up error could be due to the wrong URL of the API you are trying to access in the postman. please check the URL once carefully.
It's possible there are 2 things, happening at the same time.
The url contains a port which is not commonly used AND
you are using a VPN or proxy that does not support that port.
I had this problem. My server port was 45860 and I was using pSiphon anti-filter VPN. In that condition my Postman reported "connection hang-up" only when server's reply was an error with status codes bigger than 0. (It was fine when some text was returning from server with no error code.)
When I changed my web service port to 8080 on my server, WOW, it worked! even though pSiphon VPN was connected.
Following on Abhay's answer: double check the scheme. A server that is secured may disconnect if you call an https endpoint with http.
This happened to me while debugging an ASP.NET Core API running on localhost using the local cert. Took me a while to figure out since it was inside a Postman environment and also it was a Monday.
In my case, adding in the header the "Content-length" parameter did the job.
My environment is
Mac:
[Terminal command: sw_vers]
ProductName: macOS
ProductVersion: 12.0.1. (Monterey)
BuildVersion: 21A559
mysql:
[Terminal command: mysql --version]
Ver 8.0.27 for macos11.6 on x86_64 (Homebrew)
Apache:
[Terminal command: httpd -v]
Server version: Apache/2.4.48 (Unix)
Server built: Oct 1 2021 20:08:18.
*Laravel
[Terminal command: php artisan --version]
Laravel Framework 8.76.2
Postman
Version 9.1.5 (9.1.5)
socket hang up error can also occur due to backend API handling logic.
For example - I was trying to create an Nginx config file and restart the service by using the incoming API request body. This resulted in temporary disconnection of the Nginx service while handling the API request and resulted in socket hang up.
If you have tried all the steps mentioned in other comments, and still face the issue. I suggest you check the API handler code thoroughly.
I handled the above-mentioned example by calling the Nginx reset method with delay and a separate API to check the status of the prev reset request.
For me it was giving Socket Hung Up error only while running Collection Runner not with single request.
Adding a small delay (100-300ms) in the collection Runner solved issue for me.
In my case, I had to provide --ssl-client-key and --ssl-client-cert files to overcome these errors.
Great error, it is so general that for everyone something different helps.
In my case I was not able to fix it and what is really funny is fact that I am expecting to get multipart file on one endpoint. When I prepare request in postman I get "Error: socket hang up". If I change for other endpoint(even not existing) is exactly that same error. But when I call any endpoint without body that request works and after that all subsequent attempts works perfectly.
In my case this is purely postman issue. Any request using curl is never giving that error.
For me the issue was related to the mismatch of the http versions on the client and server.
Client was assuming http v2 while server (spring boot/ tomcat) in the case was http v1
When on the server I configured server to v2, the issue got resolved in a go.
In spring boot you can configure the http v2 as below:-
server.http2.enabled=true
Note - Also the scenario was related to using client auth mechanism (i.e. MTLS)
Without client auth/ MTLS it worked without issues but for client auth the version setting in spring boot was the important rescue point
"socket hang up" is proxy related issue. when we run same collection with the help of newman on jenkins then all test are passed.
change the proxy setting
https://docs.cloudfoundry.org/cf-cli/http-proxy.html
I had the same issue: "Error: socket hang up" when sending a request to store a file and backend logs mentioned a timeout as you described. In my case I was using mongoDB and the real problem was my collection’s array capacity was full. When I cleared the documents in that collection the error was dismissed. Hope this will help someone who faces a similar scenario.
"Socket Hung Up" can be on-premise issue some time's, because, of bottle neck in %temp% folder, try to free up the "temp" folder and give a try
I fixed this issue by disabling Postman token header. Screenshot:
I face the same issue in when calling a SOAP API with POSTMAN
by adding the following data in the header my issue was fixed
Key:Content-Length
Value:<calculated when request is sent>
In my case, I was incorrectly using a port reserved for https version of my api.
For example, I was supposed to use https://localhost:6211, but I was using http://localhost:6211.
It is port related error. I was trying to hit the API with an invalid port.
if it helps to anybody... In my case, i just forgot to use json parser (const jsonParser = express.json();) to have access to json type of objects sending to the server from the client. Be careful, don't waste your time =)
This happened to me while I was learning ASP.NET Web API.
In my case it was because the SSL certificate verification.
I was using VS Code so I oversee about SSL certificate verification and it came with https protocol.
I solved this with testing my endpoints with http protocol.
Another approach can be just disabling the SSL certificate Verification on Postman Settings.
This error was coming for me since the request url is not correct --> here you can see my url does not contains : after http
The url I was using was : http//locahost:9090/someApi
Solution
adding a colon new url is http://localhost:9090/someApi
the socket error was not coming
This is just my case may be your case is totally different as mentioned in the other answers :)
I have a FreeSWITCH v1.6.13 on my Debian 8( From git) and it is OK.
After that i installed the last FusionPBX to manage my PBX telephony FS.
But it gives me error : 403 You must define a domain called x.x.x.x in your directory...
Both i installed by FusionPBX guid in their web site.
FreeSWITCH and FusionPBX.
Im going crazy cause about 4 days i Am working and not a good result yet.
I know Fusion store data in DB and i give him a Pgsql user name and password.( not the default one it suggest after ./install command) and also FS with --enable-core-pgsql-supprt in ./configureaiton with -C.
And i searched a lot, and all says as this link.
But when i go to sip status from FusionPBX, it says that my ip is correct, and also i did what they say but no success.
Just one time it worked! and i did not why it work.
And after it does not work and again says 403 you must ....
And after that i create an extention, i go to FS terminal and type user_exist 101 (user i created in fusionpbx)it return me false.
Can it be DB issue?
I do not know why just one time it worked and after i after that again gave me 403 error.
Cause i did changed a lot i could not understand what was the cause to work it.
Is it a bug?
What exactly i am doing wrong??
Really any help will appreciate.
EDIT 1 :
My softphone is android zoiper for test the created extention in fusion.
Make sure you are using the "Extension" number as the username in zoiper. Also go to the extension's settings page to see the current password for that extension. I have used Zoiper on my android phone with FusionPBX. So I know it will work.
Zoiper account settings will be:
Account Name: Any name.
Hostname: ip/hostname of FusionPBX
Username: extension number
Password: extension password.
One thing that confused me a lot when I first tried fusionpbx is the "Users" vs "Extensions". From what I can tell "Users" are only for logging into the web UI of FusionPBX, for things like checking voicemail and managing other features. The "Users" are not SIP users.
I'm trying to send an email using Ansible, but I can't understand how it works as I don't know how to provide user and password for such service (not specified in the documentation).
Both my machine and the email server are in the same network, but I need to be authenticated in order to send the email.
This is my yml file:
---
- name: Testing email
hosts: localhost
tasks:
- name: Send email
local_action: mail
host=mail.server.com
port=993
subject="Ansible test mail"
body="Testing email"
from=my#email
to="y#email
charset=utf8
And this is the related content of the hosts' file:
[localhost]
localhost ansible_connection=local
Any idea about how should I configure it? Thanks in advance.
Looking at the source code for the mail module ( https://github.com/ansible/ansible/blob/d1effecb2ef073e478c67a7ca39cf56708a66a48/library/notification/mail ) it doesn't look like it supports SMTP authentication.
It shouldn't be too hard to add support for it however. It would require adding the username and password parameters to the module, detecting if they've both been supplied, and if so, calling smtp.login() with those parameters.
In fact, it looks like there's two pull requests to do exactly that at the moment here
https://github.com/ansible/ansible/pull/7213
and here
https://github.com/ansible/ansible/pull/6667
So support will most likely be added in dev soon.
I have just (for the first time) compiled and installed kamailio, following this guide. For configuration, I am following the documentation here
I am trying to test a new SIP user. I have created it with:
» kamctl add test testpasswd
The user is there:
» kamctl db show subscriber
|----+----------+--------------------+------------+---------------+----------------------------------+----------------------------------+------|
| id | username | domain | password | email_address | ha1 | ha1b | rpid |
|----+----------+--------------------+------------+---------------+----------------------------------+----------------------------------+------|
| 5 | test | tethys.wavilon.net | testpasswd | | 5cf40781f33c6f43a26244046564b67e | eb898de815bc16092e4c2e8c04bfe188 | NULL |
|----+----------+--------------------+------------+---------------+----------------------------------+----------------------------------+------|
I try to connect with my sip client, and the registration times out (Request Timeout (408)). I have tried to verify what is going on by doing:
» kamailio -l <my-ip> -E -ddddd -D 1
And I see lots of messages, one of them interesting:
0(15818) DEBUG: auth [api.c:86]: pre_auth(): auth:pre_auth: Credentials with realm '<my-ip>' not found
But I do not know how to solve this problem. How can I verify what credentials associated to realm <my-ip> are configured? What is a "realm"? I do not find any beginners guide for kamailio. Is there a simple how-to on how to setup a simple kamailio configuration?
The log message you pasted in the question is for debug purposes (hence DEBUG level) and it could be printed for first SIP requests that come with no credentioals (e.g., first REGISTER) -- in such case it is all ok. Those requests are challenged for authentication with 401 replies, then they are resent by phone with credentials in Autorization header.
If for those requests with credentials you don't get the same realm as used in challenge function parameters (e.g., www_challenge(), auth_challenge()...), then the SIP phone might be misconfigured. Typically the realm is the same as SIP domain in order to ensure it is unique, but that is not a must. With default kamailio configuration, the realm is the From header URI domain.
However, you say you get 408 timeout for registration, then the issues might be something else. When the credentials matching the realm are not found, then 401reply is sent back, not 408.
The reason for timeout could be that the REGISTER didn't get to kamailio or kamailio tries to send it somewhere else. You should look at the SIP traffic on the kamailio server to see what happens. You can use ngrep for that purpose, like:
ngrep -d any -qt -W byline . port 5060
Watch to see if the REGISTER comes to kamailio server and if it is attempted to be sent to another IP.
I got the same issue. I that add the alias record in kamailio.cfg and it works well.
alias="tethys.wavilon.net"
Kamailio is a proxy. It is not simple, so if you want something simple, try Asterisk instead. Kamailio configuration requires knowledge of SIP.
For this problem: you set the realm somewhere (in config file or in database) but are not using it for registration. Possible solutions would be to:
Remove the realm or set it to the correct domain name (and use it!). In the default config, that means disabling domains.
Use tethys.wavilon.net as you described in the subscriber table.
For more info, go to the Kamailio site and read this document.