Navigate from a ViewController to another - iphone

I have this design in my storyboard:
As you see the middle ViewController is connected to a Navigation Controller ( I just made the navigation bar invisible). In this middle page I add all the controls programmatically ( using Parse mobile platform login wizard ).
The thing is I want to navigate to the third page, when Login is done successfully.
- (void)logInViewController:(PFLogInViewController *)logInController didLogInUser:(PFUser *)user {
[self dismissModalViewControllerAnimated:YES];
ViewController2 *viewController = [[[ViewController2 alloc] init] autorelease];
[self.navigationController pushViewController:viewController animated:YES];
printf("%s", [#"Ali" UTF8String]);
}
the message will be printed, but the navigation is failed. Can you help? Perhaps I need to fix something in storyboard.

I'm not sure you should be sending the dismissModalViewControllerAnimated: message. Are you presenting another view controller modally on top of your login view controller?
Anyway, when you have configured a view controller in a storyboard, you can't create the view controller using alloc and init. You need to ask the storyboard to create it. There are a couple of ways to do this.
One way
One way to get the storyboard to create your ViewController2 is to make a push segue in your storyboard.
Open your storyboard.
Control-drag from the login view controller to the ViewController2.
Choose the “push” segue type.
Click on the segue.
Choose View > Utilities > Show Attributes Inspector.
In the Attributes Inspector (right-hand side of the window), set the segue identifier to “didLogIn”.
To execute the segue, do this:
- (void)logInViewController:(PFLogInViewController *)logInController didLogInUser:(PFUser *)user {
[self dismissModalViewControllerAnimated:YES];
[self performSegueWithIdentifier:#"didLogIn" sender:self];
}
Another way
Another way to get the storyboard to create your ViewController2 is to give it a storyboard ID and ask the storyboard to instantiate the view controller by ID. Then you can push the view controller.
Before you can ask the storyboard to create it, you must give a “storyboard ID” to the ViewController2 instance in your storyboard.
Open your storyboard.
Select the ViewController2 instance.
Choose View > Utilities > Show Identity Inspector.
In the Identity Inspector (right-hand side of the window), enter “viewController2”. Case is important!
Then, in your code, ask the storyboard to instantiate viewController2:
- (void)logInViewController:(PFLogInViewController *)logInController didLogInUser:(PFUser *)user {
[self dismissModalViewControllerAnimated:YES]; // Should this be here?
ViewController2 *viewController = [[[ViewController2 alloc] init] autorelease];
[self.navigationController pushViewController:viewController animated:YES];
}

Try this way,
ViewController2 *myViewController=[storyboard instantiateViewControllerWithIdentifier:#"TheNameOfYourController"]
[self.navigationController pushViewController:myViewController animated:YES];

Because a lot of relevant code/settings is missing I would suggest the following:
Use this code:
-(void)logInViewController:(PFLogInViewController *)logInController didLogInUser:(PFUser *)user {
[self dismissViewControllerAnimated:YES completion:NULL];
Class klass = [[NSBundle mainBundle] classNamed:#"ViewController2"];
ViewController2 *viewController = [[klass alloc] init];
[self.navigationController pushViewController:viewController animated:YES];
[viewController release];
NSLog("%#", #"Ali");
}
If that doesn't work check how you suppose to initialize ViewController2.
If all this doesn't help please try to post more relevant code.

To move next viewController using Storyboard Identifier
nextViewController *objnextViewController = [self.storyboard instantiateViewControllerWithIdentifier:#"nextViewControllerIdentifier"];
[self.navigationController pushViewController: objnextViewController animated:YES];

Related

switching view black page

I'm trying to do a switch view. My first view is a storyboard and i want to switch for view2, i have no problem when click the botton in my first view everything is fine. The prolem is when i am trying to go back, the screen is going black and is not going back to the first view. Here the code that i'm using.
ViewController.h
- (IBAction)View2:(id)sender;
ViewController.m
- (IBAction)View2:(id)sender {
View2 *second = [[View2 alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:second animated:YES];
}
And here the code that i am using to go back from the second view to the first.
view2.h
- (IBAction)back:(id)sender;
View2.m
- (IBAction)back:(id)sender {
ViewController *second = [[ViewController2 alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:second animated:YES];
}
Am I doing some kind of error?
Thanks
Your issue is in View2.m
- (IBAction)back:(id)sender {
[self dismissModalViewControllerAnimated:YES];
}
should do the trick
Apple has a View Controller Programming Guide that I suggest skimming through
UPDATE
If you need to jump back more that one ViewController, you should use NSNotificationCenter or keep a reference to the viewController you need to jump back to.
In my experiences, the following line does 1 of 2 things (where self is a subclass of UIViewController)
[self dismissModalViewControllerAnimated:YES];
1) If self has presented another view controller, the line above will dismiss all view controllers that have been presented on top of self
2) If self has not presented any other view controller, the line above will dismiss self back to the previous view controller

Switching Views gives me a SIGABRT Message

I'm having a little predicament switching between views, here.
Alright, so, I have this view controller class in my iPhone project called "BaseViewController," which is the default, which has a button called "GoToNextView." I added another ViewController to the storyboard called "NextViewController," and then I created another custom view controller class called "NextViewController." Under the inspector window for NextViewController on the storyboard I changed its custom class to "NextViewController;" I'm assuming everything should be hooked up, now. When I click on the "GoToNextView" button, though, the application stops with a SIGABRT message.
Here's the code for my button click action in the BaseViewController class.
- (IBAction)Transition_Next:(id)sender
{
nextViewController = [[NextViewController alloc]
initWithNibName:#"SecondView"
bundle:[NSBundle mainBundle]];
[self.view addSubview:nextViewController.view];
}
What might I be doing wrong, here?
Thanks in advance...
You can use:
- (IBAction)Transition_Next:(id)sender
nextViewController.modalTransitionStyle = UIModalTransitionStyleFlipHorizontal;
[self presentModalViewController:nextViewController animated:YES];
}
Instead of your code and it should work! Hope that helps!
You can use [self.navigationController pushViewController:nextViewController animated:NO]; or if you don't have a navigation controller, you may use
[self presentModalViewController:nextViewController animated:NO]; instead of [self.view addSubview:nextViewController.view];

Storyboard and Switch Views?

I have an iPad app that uses the storyboard board feature and then I have a separate .xib file for another view. I can switch to the separate view and its fine:
-(IBAction)SecondView:(id)sender{
SecondView *Second = [[SecondView alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:Second animated:NO];
}
But when I am in the Second View and try going back I do everything the same just with the first view controller, but It just goes to a black screen:
-(IBAction)FirstView:(id)sender{
FirstView *First = [[FirstView alloc] initWithNibName:nil bundle:nil];
[self presentModalViewController:First animated:NO];
}
What do you guys think? Am I doing something wrong? What is the best way to switch views?
initWithNibName:bundle is for loading nib or xib files.
If you are loading from a storyboard, you need to use
FirstView *First= [self.storyboard instantiateViewControllerWithIdentifier:#"IDENTIFIER"];
IDENTIFIER is defined in your storyboard, it's in the Utilities, Attributes Inspector on the right side.
HOWEVER your real problem is that you shouldn't be loading from the storyboard at all. you should just be calling
[self dismissModalViewControllerAnimated:YES];
That call will clean up the presentModalViewController:animated: that you used to put the modal view controller up in the first place.
You presented SecondView using presentModalViewController:animated:, so you need to dismiss it using dismissModalViewControllerAnimated:.
- (IBAction)FirstView:(id)sender
{
[self dismissModalViewControllerAnimated:YES];
}

don't understand how to use navigation controller in iphone

I'm extremly new to iphone and I have the following misunderstanding.
All over internet the tutorials about how to use NavigationController programatically it says:
NavigationController must be declared in applicationDidFinishLaunching and must be init with a root.After that you can add views to it.
I have this:
A UIViewController class meaning(AdiViewController.h, AdiViewController.m and AdiViewController.xib) and no Delegate file meaning no applicationDidFinishLaunching method.
What I wanna do is from my class-AdiViewController when pressing a button to go to another view.
I understand that I need a NavigationController which should retain my views having the root AdiViewController.
But my problem is where should I initializate that NavigationController in viewDidAppear??...cause I don't have the Delegate files.
If you could provide a minimal example with this small issue of mine it would be great.I'm sure that for those how are senior this is nothing but still I don't get it.Thanks
NavigationController must be declared in applicationDidFinishLaunching -> this is not true.
In your AdiViewController if you have button when you push that button you want to load navigation Controller right ?
// Hook this IBAction to your button in AdiViewController
- (IBAction)pushNavController
{
AnotherViewController* rootView = [[AnotherViewController alloc] initWithNibName:#"Anotherview" bundle:nil];
UINavigationController* navController = [[UINavigationController alloc] initWithRootViewController:rootView];
[rootView release];
[self presentModalViewController:navController animated:YES];
[navController release];
}
If you are in AnotherViewController i.e., you are in root view controller of Navigation controller. You need to push and pop view controllers from there. For example if you have a button in AnotherViewController:
// push next view controller onto navigation controller's stack
- (IBAction)pushNextViewController
{
NextViewController* nextView = [[NextViewController alloc] initWithNibName:#"NextView" bundle:nil];
[self.navigationController pushViewController:nextView animated:YES];
[nextView release];
}
// Similarly if you want to go back to AnotherViewController from NextViewController you just pop that from navigation controller's stack
- (IBAction)pushNextViewController
{
[self.navigationController popViewControllerAnimated:YES];
}

presentmodalviewcontroller navigationcontroller

I am creating a Navigation based iPhone application.
In that I have called a UiViewController using presentModalViewController. After that, the ViewController becomes visible. From that ViewController I need to call another ViewController using the sample presentModalViewController. Is this possible or not?
What do you mean by "call another uiviewcontroller"? (It really helps if you can be more detailed in your question.) If you mean, "slide in another view controller", then:
MyNewViewController *myNewViewController = [[MyNewViewController alloc] initWithNibName:#"MyNewViewController" bundle:nil];
[navigationController pushViewController:myNewViewController animated:YES];
[myNewViewController release];
...where:
MyNewViewController is the new view controller class that you want to slide in (the above code assumes you have an XIB file for the view controller class).
navigationController points to the current navigation controller. You'll have to replace it with something like [self navigationController], depending where you are in the view hierarchy.
U might be using following line to present a view controller.
//assume name of viewController which u want to present is "myViewController"
[self.navigationController presentModalViewController:myViewController animated:YES]
If you want to push an other ViewController or present an other ViewController then u will need to replace above line with following lines.
//[self.navigationController presentModalViewController:myViewController animated:YES];
UINavigationController *navigationController = [[UINavigationController alloc] initWithRootViewController:myViewController];
navigationController.navigationBarHidden = YES; //if u want to show navigation bar then remove this line
[self presentModalViewController:navigationController animated:YES];
After using above code you can present or push other view controllers within presented view controller.
Hope it will solve your problem :)