To install RTEMS and all the requirements, I need the install bin to work correctly and it seems not to be the case.
Indeed, when I try "install -c -d tmp/foo/bar" it doesn't create the directories as it should.
On the RTEMS doc, they say I need to upgrade GNU fileutils, but how should I do so? I've search the internet but found nothing...
You can see the concerned RTEMS getting started page here.
I'm running a centos 6.3 virtual machine.
Thanks,
Guillaume
For the original issue, you need to install an updated GNU coreutils. Nowadays, you should use the RTEMS Source Builder (RSB) to get started with RTEMS, because RSB will build all the dependencies you need in a host-independent fashion.
Related
Good evening people, I am trying to install pgadmin4 on fedora 36, I followed all the steps in the documentation and pgadmin4 and its dependencies were installed correctly but I do not know how to start it, or open it and it does not let me configure it on the web because I do not create the directory described in the final step to configure the web version.
I had the same problem. I solved it installing pgadmin4 from linux-pachages
https://linux-packages.com/fedora-36/package/pgadmin4-qtx86-64
I followed the same instructions but mistakenly changing "yum" to "dnf" out of force of habit. I found I got an install out of it which seemed OK at a glance, but it was just documentation and not an executable, and there was no shortcut added to run pgAdmin. Perhaps you might have inadvertently done something similar? After uninstalling, I tried again using "yum" exactly as documented and the latest executable installed without any issue. So the steps to install that would work for me were as follows. (Desktop version in my case.)
sudo rpm -e pgadmin4-fedora-repo
sudo rpm -i https://ftp.postgresql.org/pub/pgadmin/pgadmin4/yum/pgadmin4-fedora-repo-2-1.noarch.rpm
sudo yum install pgadmin4-desktop
The QT workaround also mentioned as an answer worked for me, but I wanted to avoid that since it is an earlier release (6.9) than the current 6.11, isn't officially supported and fires a warning about that every time on start up saying some functionality may be missing, which is not good for clients to see potentially in my case.
Same problem - couldn't open it after installing. You have to install pgadmin4-desktop not pgadmin4.
After conscientiously following the install instructions on Linux from swift.org, I encounter an issue where it is not possible to compile anything on a Ubuntu 18.04 machine. The REPL seems to work but during compilation (when calling swift build) the following error appears:
/usr/bin/ld: cannot find -lstdc++
There are more details in the full bug report [SR-9093]. I don't know at all what to do to solve this issue, there are similar problems already mentioned in other bug reports, for instance on this really old one [SR-35].
What should I do?
Thank you
I am assuming that you had already installed the libstdc++ successfully and you have set the permissions properly. But I really doubt that it was installed correctly but it was installed with corruption of some sort. The corruption occurred because you didn't install libstdc++ via a package manager. Result was some form of weirdness in the package manager database which effected the overall functioning system. Exactly why adding something to a folder should change anything at all. I don't know why this happens, unless the folder is hot i.e symbolically linked to a program which doesn't have any tolerance for hacks like simply copying a file into the folder. So for now try to install the libstdc++ again. Below is the link to the file to again download the correct program and this is compatible with amd64.
http://security.ubuntu.com/ubuntu/pool/main/g/gcc-5/libstdc++6_5.4.0-6ubuntu1~16.04.10_amd64.deb
And below are some link to help
https://ubuntuforums.org/showthread.php?t=1425470
https://ubuntuforums.org/showthread.php?t=808045
https://ubuntuforums.org/showthread.php?t=808045
https://packages.ubuntu.com/search?keywords=libstdc%2B%2B
https://packages.ubuntu.com/xenial/amd64/libstdc++6
Install libstdc++
sudo apt install libstdc++6
It seems possible that the apt install did not run the ldconfig program, which should be run to add the library to the list of those which ld.so knows about.
It looks like you can do it manually:
sudo ldconfig
IMPORTANT CAVEAT: I don't have Ubuntu and haven't been able to test this. And it's a sudo command. Run at your own risk, YMMV, etc.
If this does not work, it's possible that a file called /etc/ld.so.conf is not set up to search the directory where libstdc++ ended up. I wouldn't dare try to describe how to fix that.
sudo apt install -f
The command above should install any missing dependencies.
I'm running Centos 6.7 on my server and am trying to install Erlang/Rabbitmq following these instructions:
Erlang Installation
RabbitMQ Installation
The trouble is that at time of writing these install Erlang 19.0 with RabbitMQ 3.6.3, which leads to a pretty major bug as far as my client who occasionally looks at the management interface to monitor queues is concerned.
The guidance in the error ticket is not to use erlang 19 until RabbitMQ 3.6.4 is released. But how can I install a specific version of Erlang?
These steps worked for me:
Go to the download page here: https://packages.erlang-solutions.com/erlang/
Select your appropriate package -- you can copy/peek the link then download it using wget.
Install it using rpm.
Example:
# Download erlang 19
$ wget http://packages.erlang-solutions.com/site/esl/esl-erlang/FLAVOUR_1_general/esl-erlang_19.0~centos~7_amd64.rpm
# Install
rpm -Uvh esl-erlang_19.0~centos~7_amd64.rpm
You can always build install from source.
Go to the Erlang.org Downloads page, pick your version from the right side.
From there you can follow the instructions. Although they are for Ubuntu, the commands are the same except for the dependencies part where you can use the command below to install what you need:
sudo yum install g++ openssl-devel unixodbc-devel autoconf ncurses-devel
Another option would be to use kerl, which is similar to rvm in some sense and very (very!) easy to use. It will let you install different Erlang versions and switch between them any time you want.
I prefer this approach instead of looking up packages myself (with possible incompatibilities in the dependencies required) or downloading and compiling everything myself every time I want to try a new Erlang version.
i have installed clutter-1.0 from gnome site using terminal.
But when i run the application, error is notified as libcluttermm-1.0 not found. Has this
library not available as of now. if not what is the alternative that i can use.
What did you install exactly? libcluttermm (C++ interface to Clutter) is provided by the cluttermm package. On my Fedora system, I ran:
# yum install cluttermm
# locate libcluttermm
/usr/lib/libcluttermm-1.0.so.0
/usr/lib/libcluttermm-1.0.so.0.0.0
Of course, if you are doing development against it install cluttermm-devel instead.
Use libclutter instead, as libcluttermm is not in Ubuntu repositories.
How can I get PDO to work on my mac (os x 10.5)? I'm using the built in php and php in Zend/Eclipse. Can't seem to find useful drivers for it at all.
I had to install the PDO_PGSQL driver recently on Leopard, and I ran across a multitude of problems. In my search for answers, I stumbled across this question. Now I have it successfully installed, and so, even though this question is quite old, I hope that what I've found can help others (like myself) who will undoubtedly run into similar problems.
The first thing you'll need to do is install PEAR, if you haven't done so already, since it doesn't come installed on Leopard by default.
Once you do that, use the PECL installer to download the PDO_PGSQL package:
$ pecl download pdo_pgsql
$ tar xzf PDO_PGSQL-1.0.2.tgz
(Note: you may have to run pecl as the superuser, i.e. sudo pecl.)
After that, since the PECL installer can't install the extension directly, you'll need to build and install it yourself:
$ cd PDO_PGSQL-1.0.2
$ phpize
$ ./configure --with-pdo-pgsql=/path/to/your/PostgreSQL/installation
$ make && sudo make install
If all goes well, you should have a file called "pdo_pgsql.so" sitting in a directory that should look something like "/usr/lib/php/extensions/no-debug-non-zts-20060613/" (the PECL installation should have outputted the directory it installed the extension to).
To finalize the installation, you'll need to edit your php.ini file. Find the section labeled "Dynamic Extensions", and underneath the list of (probably commented out) extensions, add this line:
extension=pdo_pgsql.so
Now, assuming this is the first time you've installed PHP extensions, there are two additional steps you need to take in order to get this working. First, in php.ini, find the extension_dir directive (under "Paths and Directories"), and change it to the directory that the pdo_pgsql.so file was installed in. For example, my extension_dir directive looks like:
extension_dir = "/usr/lib/php/extensions/no-debug-non-zts-20060613"
The second step, if you're on a 64-bit Intel Mac, involves making Apache run in 32-bit mode. (If there's a better strategy, I'd like to know, but for now, this is the best I could find.) In order to do this, edit the property list file located at /System/Library/LaunchDaemons/org.apache.httpd.plist. Find these two lines:
<key>ProgramArguments</key>
<array>
Under them, add these three lines:
<string>arch</string>
<string>-arch</string>
<string>i386</string>
Now, just restart Apache, and PDO_PGSQL will be up and running.
Take a look at this PECL package: PDO_PGSQL
I haven't tried it myself, but I've been interested in playing with Postgres as an alternative to MySQL. If I have a chance to try it soon, I'll throw my results up here in case it helps.
I'm not sure this will help with the PDO drivers specifically, but you might look into BitNami's MAPPStack.
I had a ton of trouble with Postgres, PHP, and Apache on my Mac, some of it having to do with 64- vs 32-bit versions of some or all of them. So far, the BitNami MAPPStack install is working nicely in general. Maybe it will help with your PDO issues as well.
Install new php version via brew and restart server, and php -v, all issues are removed.
This is what worked for me
brew install php55-pdo-pgsql
This installs PHP 5.5.32 and PostgreSQL 9.5. I already had PostgreSQL 9.4 installed so I uninstalled the homebrew version with:
brew uninstall postgres
You then have to update /etc/apache2/httpd.conf to point to the correct PHP version and restart Apache:
LoadModule php5_module /usr/local/Cellar/php55/5.5.32/libexec/apache2/libphp5.so
My OSX version is Yosemite.