Good evening people, I am trying to install pgadmin4 on fedora 36, I followed all the steps in the documentation and pgadmin4 and its dependencies were installed correctly but I do not know how to start it, or open it and it does not let me configure it on the web because I do not create the directory described in the final step to configure the web version.
I had the same problem. I solved it installing pgadmin4 from linux-pachages
https://linux-packages.com/fedora-36/package/pgadmin4-qtx86-64
I followed the same instructions but mistakenly changing "yum" to "dnf" out of force of habit. I found I got an install out of it which seemed OK at a glance, but it was just documentation and not an executable, and there was no shortcut added to run pgAdmin. Perhaps you might have inadvertently done something similar? After uninstalling, I tried again using "yum" exactly as documented and the latest executable installed without any issue. So the steps to install that would work for me were as follows. (Desktop version in my case.)
sudo rpm -e pgadmin4-fedora-repo
sudo rpm -i https://ftp.postgresql.org/pub/pgadmin/pgadmin4/yum/pgadmin4-fedora-repo-2-1.noarch.rpm
sudo yum install pgadmin4-desktop
The QT workaround also mentioned as an answer worked for me, but I wanted to avoid that since it is an earlier release (6.9) than the current 6.11, isn't officially supported and fires a warning about that every time on start up saying some functionality may be missing, which is not good for clients to see potentially in my case.
Same problem - couldn't open it after installing. You have to install pgadmin4-desktop not pgadmin4.
Related
I use the described way for Fedora 29 but when I type sudo dnf install code I receive a long list of - nothing provides and , for example libgconf-2.5.4 (64 bit) ...etc etc.
I have tried to use nogpgcheck, but that also does not work.
If it is relevant when it starts after dnf check-update it says Failed to set locale, defaulting to C.UTF-8
I have previously installed VSCode on this laptop but then when I wanted to use another file, using File the path is shown a the top but there is no list of files. I then deleted VSode from the laptop and now I cannot install it again.
Thank you for your attention. I am awaiting your answer, thank you.
James Gibbens
So, I use Fedora, and I always do it like so:
Go to: https://code.visualstudio.com/docs/?dv=linux64_rpm (hopefully this triggers a download for you)
Then I just double click to install, through nautilus. That works like a charm for me. You should also be able to do sudo dnf install code-*.rpm in the command line, but I tend not to bother since I'm running gnome and chrome anyway, so it's pretty seamless to just use the UI provided.
After conscientiously following the install instructions on Linux from swift.org, I encounter an issue where it is not possible to compile anything on a Ubuntu 18.04 machine. The REPL seems to work but during compilation (when calling swift build) the following error appears:
/usr/bin/ld: cannot find -lstdc++
There are more details in the full bug report [SR-9093]. I don't know at all what to do to solve this issue, there are similar problems already mentioned in other bug reports, for instance on this really old one [SR-35].
What should I do?
Thank you
I am assuming that you had already installed the libstdc++ successfully and you have set the permissions properly. But I really doubt that it was installed correctly but it was installed with corruption of some sort. The corruption occurred because you didn't install libstdc++ via a package manager. Result was some form of weirdness in the package manager database which effected the overall functioning system. Exactly why adding something to a folder should change anything at all. I don't know why this happens, unless the folder is hot i.e symbolically linked to a program which doesn't have any tolerance for hacks like simply copying a file into the folder. So for now try to install the libstdc++ again. Below is the link to the file to again download the correct program and this is compatible with amd64.
http://security.ubuntu.com/ubuntu/pool/main/g/gcc-5/libstdc++6_5.4.0-6ubuntu1~16.04.10_amd64.deb
And below are some link to help
https://ubuntuforums.org/showthread.php?t=1425470
https://ubuntuforums.org/showthread.php?t=808045
https://ubuntuforums.org/showthread.php?t=808045
https://packages.ubuntu.com/search?keywords=libstdc%2B%2B
https://packages.ubuntu.com/xenial/amd64/libstdc++6
Install libstdc++
sudo apt install libstdc++6
It seems possible that the apt install did not run the ldconfig program, which should be run to add the library to the list of those which ld.so knows about.
It looks like you can do it manually:
sudo ldconfig
IMPORTANT CAVEAT: I don't have Ubuntu and haven't been able to test this. And it's a sudo command. Run at your own risk, YMMV, etc.
If this does not work, it's possible that a file called /etc/ld.so.conf is not set up to search the directory where libstdc++ ended up. I wouldn't dare try to describe how to fix that.
sudo apt install -f
The command above should install any missing dependencies.
Debian Jessie, as well as sid, have a mercurial-git package which contains the hg-git plugin. However, this package was (auto-)removed from Debian Stretch to to a release-critical bug.
But - I need it installed and running. Surely this should be possible, right?
Well, I followed the installation instructions on the plugin page:
I ran apt-get install python-setuptools python-setuptools-git python4-setuptools python3-setuptools-git
I ran easy_install hg-git and it seemed to work
But still, when I run various mercurial operations I get, as the first line, the error message:
*** failed to import extension hgext.git: No module named git
(regardless of whether I'm doing anything git-related or not.)
My questions:
Why is this happening?
What do I need to do in order to make the error message go away while having hggit working?
Now,
How do I correctly install dulwich to get hg-git working on Windows?
Apparently, that critical bug doesn't manifest always (and perhaps only under very specific circumstances), so you can try installing the Debian sid version of the mercurial-git package (that is, version 0.8.11-1 at the time of writing). There's a SuperUser question about how to do this:
https://linuxaria.com/howto/how-to-install-a-single-package-from-debian-sid-or-debian-testing
my personal opinion in this case is to simply install the .deb file, which you can get from here (it's not platform-specific; at the link you'll need to choose a mirror.) That makes the error message go away, at least assuming you have:
[extensions]
hgext.bookmarks =
hggit =
in your ~/.hgrc file.
I have an issue on login to my computer when nvidia-396 is installed. It returns to login screen after giving error message pop up. When I remove the nvidia* and restart lightdm it works fine.
Could you please help me fixing this.
Thanks.
I had the same issue with this driver.
my system is:
Nvidia gtx 1060 (6gb)
AMD Fx 8350
ASUS motherboard
I was using the 390 driver ( 394.48 ), then upgraded to 396 and got this 'lightdm<->nvidia driver' problem.
It seems that mostly users are getting this bug too.
Unfortunately there's no solution yet, the nvidia-396 driver is still in beta according to Nvidia drivers page. Just purge the 396 driver and switch back to an older version, then everything should work fine.
If not, see this askubuntu question and this Nvidia topic (only step 2, 4 and 5 are necessary for you, but yet the whole tutorial may become usefull) , it helped me to get the drivers working again after i messed up badly some files and packages.
This is what i did, no login screen after upgrading the Nvidia driver, it works for me.
login with console Ctrl+Alt+F1
login as root and remove the read-only file system by mounting mount -o remount,rw /
stop lightdm , /ete/init.d/lightdm stop. (if this is in inactive(dead) just copy backup xorg.conf.new file in your root directory and copy file to /ete/X11/xorg.conf and reboot)
then remove old nvidia Drivers, apt-get remove --purge nvidia-*
add the driver repository add-apt-repository ppa:graphics-drivers/ppa
apt-get update
apt-get install nvidia-387
apt-get install ubuntu-desktop
start lightdm /etc/init.d/lightdb start. or reboot.(Finished)
I was able to fix by fully removing nvidia drivers with bumblebee.
sudo apt purge nvidia* bumblebee
And reinstalling
sudo apt install nvidia-396
Problem description
Nvidia-396, which you have installed intently or unawarely auto-installed by other related package, such as swig, can not properly used in ubuntu 16.04.
Solution
The best way to solve the problem would be ever find the miss-operation firstly. To do this, firstly, you need to check your command history by :
vi ~/.bash_history
and then search "sudo" keywords which indicate essential command, and find suspects. In my case, it is
sudo install swig
Finally, revert it by :
sudo apt-get purge swig
CAUTION : PLEASE NEVER DO
sudo apt-get upgrade
It will install newest package of your whole system which will include nivida-396
For me I just deleted the .Xauthority and two more of them having different suffixes from my home folder and it was working again fine!
How can I get PDO to work on my mac (os x 10.5)? I'm using the built in php and php in Zend/Eclipse. Can't seem to find useful drivers for it at all.
I had to install the PDO_PGSQL driver recently on Leopard, and I ran across a multitude of problems. In my search for answers, I stumbled across this question. Now I have it successfully installed, and so, even though this question is quite old, I hope that what I've found can help others (like myself) who will undoubtedly run into similar problems.
The first thing you'll need to do is install PEAR, if you haven't done so already, since it doesn't come installed on Leopard by default.
Once you do that, use the PECL installer to download the PDO_PGSQL package:
$ pecl download pdo_pgsql
$ tar xzf PDO_PGSQL-1.0.2.tgz
(Note: you may have to run pecl as the superuser, i.e. sudo pecl.)
After that, since the PECL installer can't install the extension directly, you'll need to build and install it yourself:
$ cd PDO_PGSQL-1.0.2
$ phpize
$ ./configure --with-pdo-pgsql=/path/to/your/PostgreSQL/installation
$ make && sudo make install
If all goes well, you should have a file called "pdo_pgsql.so" sitting in a directory that should look something like "/usr/lib/php/extensions/no-debug-non-zts-20060613/" (the PECL installation should have outputted the directory it installed the extension to).
To finalize the installation, you'll need to edit your php.ini file. Find the section labeled "Dynamic Extensions", and underneath the list of (probably commented out) extensions, add this line:
extension=pdo_pgsql.so
Now, assuming this is the first time you've installed PHP extensions, there are two additional steps you need to take in order to get this working. First, in php.ini, find the extension_dir directive (under "Paths and Directories"), and change it to the directory that the pdo_pgsql.so file was installed in. For example, my extension_dir directive looks like:
extension_dir = "/usr/lib/php/extensions/no-debug-non-zts-20060613"
The second step, if you're on a 64-bit Intel Mac, involves making Apache run in 32-bit mode. (If there's a better strategy, I'd like to know, but for now, this is the best I could find.) In order to do this, edit the property list file located at /System/Library/LaunchDaemons/org.apache.httpd.plist. Find these two lines:
<key>ProgramArguments</key>
<array>
Under them, add these three lines:
<string>arch</string>
<string>-arch</string>
<string>i386</string>
Now, just restart Apache, and PDO_PGSQL will be up and running.
Take a look at this PECL package: PDO_PGSQL
I haven't tried it myself, but I've been interested in playing with Postgres as an alternative to MySQL. If I have a chance to try it soon, I'll throw my results up here in case it helps.
I'm not sure this will help with the PDO drivers specifically, but you might look into BitNami's MAPPStack.
I had a ton of trouble with Postgres, PHP, and Apache on my Mac, some of it having to do with 64- vs 32-bit versions of some or all of them. So far, the BitNami MAPPStack install is working nicely in general. Maybe it will help with your PDO issues as well.
Install new php version via brew and restart server, and php -v, all issues are removed.
This is what worked for me
brew install php55-pdo-pgsql
This installs PHP 5.5.32 and PostgreSQL 9.5. I already had PostgreSQL 9.4 installed so I uninstalled the homebrew version with:
brew uninstall postgres
You then have to update /etc/apache2/httpd.conf to point to the correct PHP version and restart Apache:
LoadModule php5_module /usr/local/Cellar/php55/5.5.32/libexec/apache2/libphp5.so
My OSX version is Yosemite.