Related
When deleting a source folder in a PyDev project in the Project Explorer, the project PYTHONPATH is not updated and there is a red x marking in the outline with an error message saying "Source folder: [source folder name] not found".
Is this really the intended behavior? I would expect the PYTHONPATH to be updated if source folders are removed.
I'm using PyDev version 2.7.3 and Eclipse 3.7.2.
Steps to repeat the problem:
In Project Explorer, create a new PyDev project with File -> New -> PyDev Project
Create a new PyDev source folder by right-clicking the new project and selecting New -> Source Folder (under the PyDev menu)
Remove the source folder (which was just added) by right-clicking the source folder and select Delete.
Add a new source folder (needed to trigger the error).
There is a red x error mark and a message saying "Source folder: [source folder name] not found".
Go to PyDev Properties. The deleted folder is still listed in the Source Folders tab under PyDev-PYTHONPATH.
Note: When repeating the steps above in the Package Explorer instead of the Project Explorer, the red x's don't show up - so you can't see there is a problem. However, if you look in PyDev properties the behavior is the same - PYTHONPATH is not updated.
Right click on your project folder->Properties->PyDev - PYTHONPATH. Select the directories causing the errors and click Remove on the right.
Looks like the problem happens when project name doesn't match directory name.
e.g.,
env/VersionModifier/src/myfile.py
.project file = CoolTool
source folder not found
env/VersionModifier/src/myfile.py
.project file = VersionModifier
OK
You could call it a bug or an "enforcement of best practice" but right clicking on the project and making its name match its enclosing directory fixed the problem for me in Kepler.
Good luck
Peter
the way i resolved it is to go to the folder in which your code is stored and find a file by the name of .pydevproject. It is an invisible file in eclipse/aptana so you may have to do this through cli or file browser. look for a structure that look like <path>path/to/your/file</path> and delete the ones that show errors in your package explorer. this will resolve your problems for now, but this is a bug and needs to be reported.
I think the problem stems from the fact that pydev fails to remove the <path>...</path> vars once the user deletes the source folder.
Below is how I resolved this, hope it helps.
Clean Up:
Removed the project from eclipse; of course, leaving it as on disk.
From the source directory removed ".project" and ".pydevproject" files.
Recreate:
Created a new PyDev project (in eclipse), providing the existing source directory. In the New Project dialog, selected "Create 'src' folder and add it to the PYTHONPATH".
The project got created properly, without any source-folder errors.
Now add the folder you want to add as source directory, by right-clicking the folder and selecting the option under "PyDev".
At the end, you may just delete the "src" directory that was created by eclipse.
I don't know what went wrong, because this was working before, but all of the sudden I don't have any files in my eclipse package explorer.
The workspace path appears to be correct and the file permissions are correct.
Can anyone think of what's wrong?
Refresh the project
If that does not work, close and open the project again.
I had the same problem (Probably caused when I cancelled a copying to my Dropbox folder)
I only needed to click File → Import → General → Existing Projects into Workspace and select the missing projects in the window that appeared.
Workaround
Create a blank workspace
Navigate to (File > Switch to workplace > Other)
Clik Browse > Make new folder
Click Ok in browse window
Click ok in create workspace window
Import your existing project into the new workspace
Navigate to File > Import
Click General > Existing project into workspace
Click Next
Browse and select your previous project
Click on Finish
Congrats! Now you can see your project in the package explorer by importing it.
Project Explorer -> click on "View Menu"
-> Top Level Elements -> Click on "Projects"
Don't know what causes the problem, but found a way to get the files back into the package explorer.
If you go into the path of your workspace and find your projects, then you can pack them all into a zip archive file, and from this zip archive file you can import your projects again by using the File → Import → General → Existing Projects into Workspace menu.
I don't know what causes the problem, but in my case I think it have something to do with me having my workspace in a dropbox folder.
ps. I don't know if you actually can take more than one project into one zip file and make it work, I have only tried it with one project pr. ZIP-file, but it shouldn't matter.
In 2020 on OSX I just went to Project -> Refresh and wham! my files appeared.
I had started the wrong installation of eclipse. When I started the correct installation my code showed up fine. I have both C++ and Java EE installs.
Just refresh all the projects, you able to see all missed files after you import from a workspace.
1) Make sure that you use the right workspace.
2) Choose your "workspace"-Folder "/YourWorkspace",
NOT your project folder"/YourWorkspace/yourProject"
Alternatively delete your project from your
"YourWorkspace>/.metadata/.plugins/org.eclipse.core.resources/.projects/PROJECTNAME/.location"
and restart.
Hope this helps
I had the same problem. I was not able to see the imported files in Eclipse, but there were visible in File Explorer.
After a while, I noticed that all the files were imported. They had their names changed from myFile.class to ._myFile.class.
I deleted all the imported files from my workspace by using File Explorer.
By using the same File Explorer, I copy-pasted the folders/files in the workspace.
Then in Eclipse, I refreshed the project (F5 or click-right -> Refresh or File -> Refresh)
I faced the same issue and the reason was that I choose double click on Eclipse Icon, then I need to choose Work Space.
Here I made mistake. You do not need to select folder in which has all your project files
e.g //Desktop//User//Selenium//S1A//all files related to project
In that case for workspace you choose //Desktop//User//Selenium, import your project by clicking Import for eclipse 2020 and choosing File path //Desktop//User//Selenium//S1A.
may be a rare case like in mine, but if you played with colors this may be an issue and especially, if you changed theming and did not restart, which may correct some problematic visual stuff.
Import>Existing Projects into Workspace> Select root directory> Select the folder
The solution that helped me:
create a new folder (=Java-Package) with a new name. I used the System-Filemanager.
copy the disappearing files to the new folder (=Java-Package).
correct the links (JavaCommand 'import') to the new folder.
delete the old files and the old folder.
As the problem happened in my case:
I am using Eclipse IDE 2021-12 (4.22.0) for my Java project.
After importing an existing Project into Workspace all was fine.
While building the project, same files disappeared from the 'Project Explorer'-Tree.
These files still do exist as the System-File-Explorer shows. So no file got deleted. But no more listed.
After Refresh (F5) most of the files got listed again in the 'Project Explorer'-Tree.
Without doing anything an Eclipse background process let files again disappear from the 'Project Explorer' - Tree. Compilation of the project leads to missing files.
Sometimes 3 files disappeared. Some seconds later more files disappeared. Sometimes it leads to an empty Java-Package.
This disappearance of some files happened without any input from me. It was done by the Eclipse background process. It felt like watching a movie.
What does not help in my case: Restarting of eclipse, Close and Open the project, editing the files.
In my case, the problem was due to an unwanted nested project in a subfolder. There is a pre-set filter that hides folders in that case.
For some reasons, the sub project was not shown in Project Explorer.
My solution :
delete the project (without deleting project contents on disk)
import existing projects into workspace, and do not import nested project.
You might have filtered the resource out of the project.
Select the project, right click, choose properties.
Under Resource, choose "Resource filters" - check that the name of the folder or the files was not filtered in the list under "Exclude all" (if there is one)
I am trying to import a project that me and my co-worker have been working on.. and keep getting this error after I select-- "import" then "import existing project" then click archive file, and then I click next, and this error comes up:
Some projects cannot be imported because they already exist in the
workspace
Uncheck the "copy projects into workspace" checkbox, and then click "refresh" button, you will be able to import the project
go to .project file in your project and change the name of the project in name tag
It has just happened to me too. Finally I realized that the project was already open in my workspace but it was not visible because of the selected working set. You have just to deselect the active working set and all opened projects will become visible.
This usually happens when you change the project directory physically without first delete in Eclipse.
You can view and delete these hidden projects in the following view:
Window -> Show View -> Other -> General -> Navigator
Then simply just continue with the process of import existing project.
In my case, I copied one of the projects (say 'Project1') from the workspace and pasted it to the same workspace. After that I modified the name of the pasted project (say to 'Project2'). I could not see it in the repository.
The main reason was .project file from the new project still had:
<name>Project1</name> instead of <name>Project2</name>.
So, I did following things in order to get the issue fixed:
Cut and paste Project2 outside the workspace
Change .project file to have <name>Project2</name>
Try importing Project2 again.
It worked for me.
You may have a project with same name in your workspace. Try to refresh (file->refresh) your workspace after deleting the another one with same name.
A typical situation occurs when you want to re-import a deleted project.
Projects in the Eclipse workspace must be unique. Note though that the project name need not be the same as the directory/folder name of the project, so you can either delete any existing project with the same name or alternatively rename the existing projects.
You have one occult directory named ".metadata" in workspace directory. Close Eclipse, delete ".metadata" and open Eclipse. When eclipse ask you about workspace make sure that ".metadata" isn't in workspace directory and click "ok" button to select default workspace.
Maybe you get the same project name in your '.project' file,check it,if yes, rename another name.than import again
If you've arrived at this because you have cloned a git project into the existing workspace and now you want to promote that workspace to a full fledged project then you should use the 'Git Repositories' view -> select 'Working Directory' -> Import Projects -> Existing projects.
Check if you have configured Eclipse to show ALL the working set. I once encountered exactly the same problem and it turned out I accidentally imported the project into the Other Projects working set. And my Eclipse configuration didn't show that working set in the package explorer, which lead me to believe that the project was not imported yet.
Updated for #Mawg:
First, click the Select Working Set...:
Then, choose No Working Sets:
This will effectively disable the working set and show all projects.
Try to rename the value of <name> tag which inside ".project" file of your project.
<?xml version="1.0" encoding="UTF-8"?>
<projectDescription>
<name>Rename this value</name>
<comment></comment>
<projects>
This will work for sure. Here you are just renaming your project.
EASIEST WAY: Right click on the project (folder that reads "MainActivity") go to Refactor -> Rename and you will get a text field allowing you to rename your project.
If you get an alert saying your project is out of sync with the filesystem press F5 (refresh) and try again.
Take a look in your workspace folder, you may have an old project there with the same name as the one you are importing (even though it's not being shown on eclipse).
When you delete a project on Eclipse, if you don't check the checkbox on the dialog, it just removes it from the view and doesn't delete the folder on the workspace directory.
In my case i had deleted the resources directory from my .metadata.plugins:
Go to your workspace
Enter .metadata.plugins
Delete : org.eclipse.core.resources directory
Another way I just found!
MOVE the project to some other folder and then import and if required copy to workspace
I had this issue when I deleted a project and tried to import the code again. Eclipse never really deleted the project and still held a reference to the project name/folder in the workspace. I had to created a new project with the same name and my code appeared as it was. I believe this only worked because the project path was never changed.
It was happened to me when
I delete project from eclipse Project Explorer and not checked the
remove content from disk.
Next time when I tried to import same project in workspace then got same problem.
To solve I just did FYI work that every kid can do :)
So How I solved it:
Cut Ctrl + x myProject folder from eclipse workspace to other location ie Desktop
Right Click Navigator (you can get it from Window > Show View > Navigator) and Refresh (it will prompt following dialog)
Just click Yes button and move your project folder back to eclipse workspace directory
Import again!
Now Rock 'n' Role
This warning means you just deleted project from navigator, but the project is present in the working set. Or else your working set has project with same name, so go to work-space directory and delete the project which has the same name and import again.
This worked for me.
File > New > Android Project > Create project from existing source
Location = the location of the project you want to import.
You will get a warning "An Eclipse project already exists in this directory.
Consider using File > Import > Existing Project instead." But you will be able to click "Next" and the project should in effect be imported.
In eclipse click file then select switch workspace then browse and select another folder. Now repeat the same process and this time there will be no error :)
I had a similar problem, I have the same repository I wanted to import twice. I renamed the existing project by right clicking on the project > refactor > rename then imported it again.
My problem was a little bit different.
For example, the project name (what I see) was FooProject and in the imported project, I was looking for the FooProject but I could not. However, Eclipse does not let me import that project because he claims that it is already imported. And then, I have looked at the .project file of the project and I have seen that the actual name of the project was not what I see (FooProject).
The conclusion;
The name of the project (what you see in Eclipse) may be different than the actual name of the project (what maven see). Because of this reason. Please be sure that they are the same name by checking .project file of the project.
Nothing about could not solve my situation. This is how I solved.
Close the IDE
Remove the same name project form workspace
Start the IDE
Clean all project (not sure this helped)
File > Import > Existing Project
click refresh button
import project
Done..
At least on Eclipse Juno, you can toggle on Advanced. Then select [groupid].[artifactid] from the Name Template dropdown. That should make your project uniquely named. (If you keep multiple versions of a given artifact, you can select [groupid].[artifactid].[version] instead). Be sure to click the Refresh button so the changes are visible. Wash, rinse, repeat as needed.
delete it from eclipse......u might have closed the project in eclipse by "(Rightclick)-->close project".....so even if you delete this project from workspace folder....it stays there in eclipse IDE as closed project.....you should delete it from Eclipse IDE...!!!
I have a slightly different situation whereby my eclipse stops responding and I have had to kill the session. After restarting Juno, then the particular project I was working on disappeared although .project file exists. Trying to import back into Eclipse would yield the same "Some projects cannot be imported .." or "A project with this name already exists" if trying to create a new project.
In the end, since I was using Working Sets, I managed to find this file .metadata.plugins\org.eclipse.ui.workbench\workingsets.xml. Manually added the missing entry and restarted eclipse and voila, it came back.
I had the same error because there was one more project under svn in workspace but with another name. So I've removed it.
This is what i have noticed for the above issue :- If the checkout folder (folder where your pom project resides) is same as the eclipse workspace folder then i am getting this issue
SOLUTION
when i used a separate workspace folder for importing the project, eclipse did worked smoothly :)
In case you are using Maven, make sure that your artifactId in pom.xml does not have the same name as any existing project name in your Eclipse project explorer.
I am trying to open Adobe ColdFusion Builder, and it is throwing the following error:
"open project has encountered a problem"
Problems occurred opening the selected resources.
The project description file (.project) for 'dev - work' is missing.
This file contains important information about the project.
The project will not function properly until this file is restored.
How do I solve this issue?
What about ovbious steps? It looks like you accidentally deleted the Eclipse project configuration file.
Check if ''.project'' file exists in project directory. If it is missing, re-creating the project and copying the source files from the old is the way to fix it.
Also you can try to create project with same name and copy the ''.project'' file to the old one. Bu you'll need to remove this invalid project first (without deleting the source files) and import it later, because Eclipse (FBuilder) wont allow you to have two projects with same name in workspace.
if you are using developing on windows 7 platform, go to you workspace folder(not where you project is located) right click go to restore select an earlier version. it worked for me
I use Aptana Studio (based on Eclipse). I'm trying to get Eclipse to completely ignore an entire directory inside a project. I mean COMPLETELY. I don't want it to display in the project folder. I don't want Eclipse to even be aware it exists.
Unfortunately, all my efforts to add it as a filter don't work. See http://forums.aptana.com/viewtopic.php?f=14&t=8340#p33714 . I think the filter only prevents the folder from being displayed in the project display. It doesn't keep Eclipse from actually looking at all the files in that folder for code assist, etc.
My problem is that directory has thousands of text files. So, each time Eclipse opens or refreshes this project, it analyzes all those files.
How can I prevent this?
Not sure about this aptana thing, but there is a convenient way to do it in native eclipse:
Right-click a project folder in Project Explorer tree and go to "Properties".
Resource -> Resource Filters.
Add as much exclusion filters for files/folders as you like.
If your project tree is not refreshed immediately, press F5 to enforce it.
Consider also the 'Derived' checkbox: right-click an entry in the package explorer, choose properties, check Derived. This may solve part of your problem.
See http://robmayhew.com/eclipse-ignore-folder/
If you have a linked resource (pointing off to some other file/folder on disk) with the same name in the same location in the resource tree, then the real folder on disk will be hidden from the resource model.
Unfortunately you can't create the linked resource if the real directory is already there in the project structure. You can try something like this:
On disk, rename/move the directory in question
Refresh the project, the directory is gone
Create a linked resource ( New -> File/Folder >> Advanced -> Link to file in the file system ). Name it the same as the original directory.
On disk, restore the original name of the directory
Refresh project.
Try right-clicking "Properties" and unchecking all permissions.