I am new in perforce Visual Client and I am not able to figure out a very basic utility. I want to search my workspace for files which contain some specific words. I found out that at Edit --> Find in File ---> there are two options Search in: and All or part of the file name:. But where do I set the filter that I only want to search files which contain specific words? I think the Perforce Visual Client should have this basic utility somewhere but maybe I'm missing it. Kindly help me to find this option. Your help greatly appreciated.
Perforce visual client do not contain tool for searching files with specific content. You can use command line:
p4 grep -e compile_settings //Jam/MAIN/src/...
check http://www.perforce.com/blog/100712/p4-grep
Related
Is there a way to find specific words or phrase in all files in a directory
while connecting with ftp server in VScode?
If I download the whole files in ftp server, then it is possible to search the words in all files
However, connecting with ftp server through VScode and, trying to find the words in all files,
it doesn't work. It does work only for specific php file which I chose.
It may help to know what operating system you are on. You may try the command "grep". Here is some documentation on the command.
I hope this helps, or someone else is able to help you quickly!
I am not able to find checkout option for a file when I right click on it in ClearCase explorer while the option is available for rest of the files.
The only difference is that the file I want to check in has a very long name ( I am using Windows ).
While I am able to check in via cleartool commands, it isn't possible from front end ( CC explorer) Is there any way to check out such files from CC explorer?
There are two possible causes for a checkout unavailable:
the path of the file itself is too long (combined with the long filename, more than 256 characters): a subst command can help shorten the path.
or the file is already checked out.
A cleartool status can help distinguish between those two cases.
And a cleartool lsvtree -graph aFile (replace aFile with your long filename) can help see the file history and see if it is checked out (reserved or not) in another view.
The window 255 characters restriction for file name can't be bypass or any sidestep if it.
You have the following options:
1. Try to shorten the name. Including all the folders that are the prefix for the view. Like vonC suggested.
2. Try create the view on Linux, and mount the folder to some shared area that can be seen in windows.
3. Use dynamic view, but Im not sure it will work.
Keep in mind, that other apps can also fail even after you solve it for clearcase as it is a Windows problem. Like msbuild or visual studio.
I am using Conan package manager on Windows to create a package. The conan command to create the package copies files to a folder within %USERPROFILE%\.conan (or C:\Users\xxxxxxx\.conan). Then from this location it builds a Visual Studio project and ultimately calls doxygen.exe to create a .chm help file in a post-build command. The doxygen command fails with:
error : failed to run html help compiler on index.hhp
Further investigation reveals the hhc.exe command executed by doxygen is failing with:
C:\Users\xxxxxxx\.conan\data\Module\1.0.0\user\channel\build\524dc97e4a3dd1f774ea3897f9e4faf26c5457d2\Documentation>"C:/Program Files (x86)/HTML Help Workshop/hhc.exe" html\index.hhp
HHC5010: Error: Cannot open "C:\Users\xxxxxxx\data\Module\1.0.0\user\channel\build\524dc97e4a3dd1f774ea3897f9e4faf26c5457d2\Documentation\html\Module.chm". Compilation stopped.
Close inspection reveals that in the error message, the ".conan" folder is missing. Sure enough, I confirmed that hhc.exe fails when the index.hpp resides in a folder that has a parent folder that starts with a ".".
Attempts to resolve this:
changing the Doxyfile setting OUTPUT_DIRECTORY to "$(TMP)/DoxygenModule" resolves the error, but creates the .chm file in another location, which I do not prefer.
navigating to the 8DOT3 name of the ".conan" folder, which is "CONAN~1", to run the hhc.exe command, succeeds, but unfortunately I have no way of getting conan to use this 8DOT3 path for creating the package. E.g. C:\Users\xxxxxxx\CONAN~1\...
I can live with the using the %TMP% folder but would prefer generating the .chm in the current folder. Anyone have any ideas?
HTML Help Workshop v1.31 is installed on my machine at C:\Program Files (x86)\HTML Help Workshop, probably from a Visual Studio installation (not sure). I attempted using a version downloaded from Microsoft website (v1.30) as well, which made no difference.
Other info: Conan version 1.18.0, Doxygen version 1.8.14, Windows 10 Version 1809
Unfortunately not a solution, but this is a known limitation in the hhc.exe, see: https://social.msdn.microsoft.com/Forums/en-US/0681145c-223b-498c-b7bf-be83209cbf4e/issue-with-html-workshop-in-a-windows-container?forum=visualstudiogeneral
HTML Help 1.x command line compiler hhc.exe cannot compile CHM file to folder whose full path contains folder name starting with dot. If you have that problem, you probably specified output path with folder starting with dot, e.g. "d:\My files.NET\documentation". You can use dots in folder names but not at the beginning.
Edit 2019-11-15:
I've just pushed a proposed patch to github (pull request 7402, https://github.com/doxygen/doxygen/pull/7402).
This proposed patch changes inside doxygen from the current directory to the short named current directory, but just for the HTML Help compilation.
Edit 2019-11-16:
Code has been integrated in the master version on github.
This is not an answer either. Actually, you found the answer and workaround[s] yourself.
Use OUTPUT_DIRECTORY to specify a directory containing no folder names beginning with periods.
The error you described is a known issue of the MS HTML Help compiler. More general, the HTML Help compiler does not like some folder and file names. Try and stick with these characters _, a..z, A..Z, 0..9. Do not use these signs in particular ., -, # .
Please note that the proprietary CHM file format is about 20 years old (Windows 95, ...). HTML Help is in maintenance mode, which means no new features and bug fixes are expected for either the runtime or the compiler. All mainstream development on HH has stopped.
There is no way to avoid this error if a directory name above begins with a period. Not even if only the necessary files are written by Doxygen and compiling of the index.hhp is done by a third-party tool like FAR HTML using your path that contains .conan. This is because all applications are using the faulty HHA.dll.
The above applies of course to the entire workflow you have described. Maybe you can interrupt it.
Doxygen can be configured not to call the HTMLHelp compiler. Just uncheck the GENERATE_HTMLHELP option (DoxyWizard: Experts > Topics > HTML). You have all files generated by Doxygen in your preferred output directory - but of course without the CHM file. This can be imported later e.g. by HelpNDoc and compiled as a CHM file in another location.
If you can interrupt the workflow and can also make changes to Doxygen's settings, then a preference setting of OUTPUT_DIRECTORY to e.g. C:/CacheMenu/CONAN~1/DOXYGE~1 also works as expected (here used as test case).
No matter what you do, your workaround and copy and paste from another directory outside is a quick solution at this stage. Please note the EDIT in #albert's answer.
Due to the fact that we need to integrate the Zend Framework on our project root, and that generating that documentation will be useless and take long time, I would like to generate documentation for all files inside application folder only.
Does anyone know how I can generate documentation for a specific project folder, trough Netbeans 7.0 interface?
Update:
The best I've found so far was to:
Open the terminal window from netbeans, and type:
sudo phpdoc -d public_html/yoursite.dev/application/ -t public_html/yoursite.dev/docs/
Update 2
Let's suppose our Zend library is inside projectrootname/library/Zend we also can try, by going to: Tools > Options > Php > PhpDoc and place the following:
/usr/bin/phpdoc -i library/Zend/ -o HTML:frames:earthli
At least for me, that doesn't seem to work, because, when I try to generate the documentation, I get permission error issues displayed on the output window.
Thanks
The -d/--directory option [1] should be used to highlight the most high-level code directory that you want phpDocumentor to start reading from. If your Zend folder is at or above the level of your application directory, then just using --directory /path/to/application should help you document only your application code.
If your Zend folder is somewhere inside your application (e.g. in your app's ./lib folder), then you can use the -i/--ignore option [2] to tell phpDocumentor about any directories that it will see but should ignore, --ignore *zend*. Just be aware that formatting your ignore value can be tricky, so see the examples in the manual. Also, be aware that as phpDocumentor runs, you will see these ignored folders and files being listed in the output... phpDocumentor "ignores" them by not generating docs for those files. It does, however, still need to parse them, in case those objects are referenced in files that do get documented.
[1] -- http://manual.phpdoc.org/HTMLSmartyConverter/HandS/phpDocumentor/tutorial_phpDocumentor.howto.pkg.html#using.command-line.directory
[2] -- http://manual.phpdoc.org/HTMLSmartyConverter/HandS/phpDocumentor/tutorial_phpDocumentor.howto.pkg.html#using.command-line.ignore
I'm using the Google Eclipse Plugin for GWT development.
To do the configuration stuff there's a folder .settings with two files
com.google.gdt.eclipse.core.prefs and com.google.gwt.eclipse.core.prefs.
These files are a kind of propertie-files.
Now I'm trying to set two different directories for source and output files.
But I can't find any documentation about these files.
What I got till now is this.
eclipse.preferences.version=1
jarsExcludedFromWebInfLib=
lastWarOutDir=myoutputdirectory
warSrcDir=war
warSrcDirIsOutput=false
But using this, at compilationtime it opens a filechooser-Dialog on myoutputdirectory every time, waiting for confirmation.
So I ask, is there a solution to setup a different outputdirectory or does anybody know where I can find more Information about the usage of these setting-files.
My version of that file has an absolute path to the lastWarOutDir.
Maybe it keeps prompting you because it can't find myoutputdirectory (or maybe you just changed it for privacy's sake here).
In any case, if you right-click on the project > Run As > Run Configurations, go to the (x)= Arguments tab and you will see the -war argument containing the value of lastWarOutDir.
If you want to be prompted so that you can change the directory, you could delete all of the arguments, forcing the Google plugin to reconfigure.
I hope that helps. If not, please let us know what you really want to do here.
Maybe I misunderstand your problem. But why don't you just tell the GWT compiler where to output the files using the -war (-workDir, -gen and -extra) command line option? Same thing works for the GWT development mode...
http://code.google.com/webtoolkit/doc/latest/DevGuideCompilingAndDebugging.html#DevGuideCompilerOptions
http://code.google.com/webtoolkit/doc/latest/DevGuideCompilingAndDebugging.html#What_options_can_be_passed_to_development_mode