XCode now keeps the logs from the previous runs handy which is great.
Is there a way to search though all of the logs.
My use case is I have seen a particular error but cant remember which run it was in. I need to find the error URL from the logs.
Xcode stores debug logs at
~/Library/Developer/Xcode/DerivedData/<YOURAPP>/Logs/Debug/
The .xcactivitylog files are actually just gz archives. Decompress them:
cd ~/Library/Developer/Xcode/DerivedData/<YOURAPP>/Logs/Debug/
EXT=".xcactivitylog"
for LOG in *.xcactivitylog; do
NAME=`basename $LOG $EXT`
gunzip -c -S $EXT "${NAME}${EXT}" > "${NAME}.log"
done
Now you can easily search them using grep or Spotlight or what your prefer.
To add onto #DrummerB answer. Once the files are unziped you can do a search with custom scope from within XCode. I prefer this to grep or spotlight.
The folder where these logs are is
~/Library/Developer/Xcode/DerivedData/[YOURAPPID]/Logs/Debug/
You can open/read/search them for example in TextWrangler.
Related
I have a script regularly appending to a log file. When I use entr (discovered here) to monitor that log file, and I then touch the log, everything works fine, but when the script appends to the file, entr fails. This may be because I have noatime set in my fstab - but that only stops the updating of the access time not the modify time, so this confuses me.
I've checked and while atime is not updating, ctime (ls -lc) definitely is. Could entr really be depending on atime? I use noatime because I have an SSD. So what should I do? I just stumbled on lazytime. Would that solve the problem?
Since monitoring the log file was not working, I tried entr -cdr on the directory of files that are updated (a new file is created) at the same time as the log (the log is in a different directory). entr recognizes when the directory contents change, but the -r does not work. The entr process just ends, saying "entr: directory altered".
Any idea how to fix this or whether I should just go back to inotify, would be appreciated.
Edit: I have written it with inotify now, and the event reported when the log file is written to is, sensibly enough, "MODIFY."
It turns out that entr does not respond to IN_MODIFY events, but only to these (in Linux):
IN_CLOSE_WRITE|IN_DELETE_SELF|IN_MOVE_SELF|IN_CREATE
Also, IN_ATTRIB, but only if the file-mode or inode numbers change.
In BSD/OSX, it's:
NOTE_DELETE|NOTE_WRITE|NOTE_RENAME|NOTE_TRUNCATE|NOTE_ATTRIB
Also, the option -r has no effect in the context of the -d option. It only works when entr is monitoring files.
See the developer's comments. Also, more info on entr.
I'm using Windows 10 if it matters and I'm trying to feed a file to the "oeminst" app that will convert this file from .EDR to .CCSS. According to the app's website its usage summary is this:
oeminst [-options] [inputfiles]
-v Verbose
-n Don't install, show where files would be installed
-c Don't install, save files to current directory
-S d Specify the install scope u = user (def.), l = local system]
infile Manufacturers setup.exe install file(s) or .dll(s) containing install files
infile.[edr|ccss|ccmx] EDR file(s) to translate and install or CCSS or CCMX files to install
If no file is provided, oeminst will look for the install CD.
more info can be found here https://www.argyllcms.com/doc/oeminst.html
So far I tried this code:
C:\Users\PC>oeminst infile. [C:\Users\PC\testfile.edr]
oeminst: Error - Unable to load file 'infile [C:\Users\PC\testfile]'
I'd appreciate if someone at least could tell me if I'm doing it right or not.
P.S. sorry for the messed up text. Not sure how to fix it. It looks good in editing mode.
Try this : oeminst infile.edr C:\Users\PC\testfile.edr
Nevermind, I got it.
C:\Users\PC>oeminst C:\Users\PC\testfile.edr
I am attempting to regularly archive a few file types hosted on a community website where our admin has been MIA for years, in case he dies or just stops paying for the hosting.
I am able to download all of the files I need using wget -r -np -nd -e robots=off -l 0 URL but this leaves me with about 60,000 extra files to waste time both downloading and deleting.
I am really only looking for files with the extensions "tbt" and "zip". When I add in -A tbt,zip to the input, wget then only downloads a single file, "index.html.tmp". It immediately deletes this file because it doesn't match the file type specified, and then the process stops entirely, with wget announcing that it is finished. It does not attempt to download any of the other files that it grabs when the -A flag is not included.
What am I doing wrong? Why does specifying file types in the way that I did cause it to finish after only looking at one file?
Possibly you're hitting the same problem I've hit when trying to do something similar. When using --accept, wget determines whether a links refers to a file or directory based on whether or not it ends with a /.
For example, say I have a directory named files, and a web page that has:
Lots o' files!
If I were to request this with wget -r, then I wget would happily GET /files, see that it was an HTML document containing a bunch of links, and continue to download those links.
However, if I add -A zip to my command line, and run wget with --debug, I see:
appending ‘http://localhost:8080/files’ to urlpos.
[...]
Deciding whether to enqueue "http://localhost:8080/files".
http://localhost:8080/files (files) does not match acc/rej rules.
Decided NOT to load it.
In other words, wget thinks this is a file (no trailing /) and it doesn't match our acceptance criteria, so it gets rejected.
If I modify the remote file so that it looks like...
Lots o' files!
...then wget will follow the link and download files as desired.
I don't think there's a great solution to this problem if you need to use wget. As I mentioned in my comment, there are other tools available that may handle this situation more gracefully.
It's also possible you're experiencing a different issue; the output of adding --debug to your command line clarify things in that case.
I also experienced this issue, on a page where all the download links looked something like this: filedownload.ashx?name=file.mp3. The solution was to match for both the linked file, and the downloaded file. So my wget accept flag looked like this: -A 'ashx,mp3'. I also used the --trust-server-names flag. This catches all the .ashx that are linked in the webpage, then when wget does the second check, all the mp3 files that were downloaded will stay.
As an alternative to --trust-server-names, you may also find the --content-disposition flag helpful. Both flags help rename the file that gets downloaded from filedownload.ashx?name=file.mp3 to just file.mp3.
I am using Pentaho CE 5 on windows. I would like to use CTools but I can't make them show up in the File -> New menu to use them.
Being behind a proxy, I can not use the Marketplace plugin, so I have tried a manual installation.
First, I tried to use the ctools-installer.sh. I have run the following command line in cygwin (wget and unzip are installed):
./ctools-installer.sh -s /cygdrive/d/Users/[user]/Mes\ Programmes/pentaho/biserver-ce/pentaho-solutions/ -w /cygdrive/d/Users/[user]/Mes\ programmes/pentaho/biserver-ce/tomcat/webapps/pentaho/
The script starts, asks me what module I want to install, and begins the downloads.
For each module, I get an output like (set -x added to the script) :
echo -n 'Downloading CDF...' Downloading CDF...+ wget -q --no-check-certificate 'http://ci.analytical-labs.com/job/Webdetails-CDF-5-Release/lastSuccessfulBuild/artifact/bi-platform-v2-plugin/dist/zip/dist.zip'
-O .tmp/cdf/dist.zip SYSTEM_WGETRC = c:/progra~1/wget/etc/wgetrc syswgetrc = C:\Program Files (x86)\GnuWin32/etc/wgetrc
'[' '!' -z '' ']'
rm -f .tmp/dist/marketplace.xml
unzip -o .tmp/cdf/dist.zip -d .tmp End-of-central-directory signature not found. Either this file is not a zipfile, or it
constitutes one disk of a multi-part archive. In the latter case
the central directory and zipfile comment will be found on the last
disk(s) of this archive. unzip: cannot find zipfile directory in
.tmp/cdf/dist.zip,
and cannot find .tmp/cdf/dist.zip.zip, period.
chmod -R u+rwx .tmp
echo Done Done
Then the script ends. I have seen on this page (pentaho-bi-suite) that it is the normal output. Nevertheless, it seems a bit strange to me and when I start my pentaho server (login: admin/password), I cannot see any new tools in the menus.
After a look to a few other tutorials and the script itself, I have downloaded the .zip snapshots for every tool and unzipped them in the system directory of my pentaho server. Same result.
I would like to make the .sh works, what can I try or adjust ?
Thanks
EDIT 05/06/2014
I checked the dist.zip files dowloaded by the script and they are all empty. It seems that wget cannot fetch the zip files, and therefore the installation fails.
When I try to get any webpage through wget, it fails. I think it is because of the proxy.
Here is my .wgetrc file, located in my user's cygwin home folder:
use_proxy=on
http_proxy=http://[url]:[port]
https_proxy=http://[url]:[port]
proxy_user=[user]
proxy_password=[password]
How could I make this work?
EDIT 10/06/2014
In the end, I have changed my network connection settings to bypass the proxy. It seems that there is an offline mode for the installer, so one can download all needed files on a proxy-free environment and then run the script offline.
I guess this is related with the -r option.
I consider this post solved, since it not a CTools issue anymore.
Difficult to identify the issue in the above procedure..
but you can refer this blog he is key member of pentaho itself..
In the end, I have changed my network connection settings to bypass the proxy. It seems that there is an offline mode for the installer, so one can download all needed files on a proxy-free environment and then run the script offline. I guess this is related with the -r option.
I consider this post solved, since it is not a CTools issue anymore.
You can manually install the components from http://www.webdetails.pt/ctools/ or if you have pentaho 5.1 or above, you add the following parameters to CATALINA_OPTS option (in start-pentaho.bat or start-pentaho.sh):
-Dhttp.proxyHost= -Dhttp.proxyPort= -Dhttp.nonProxyHosts="localhost|127.0.0.1|10...*"
http://docs.treasuredata.com/articles/pentaho-dataintegration#tips-how-can-i-use-pentaho-through-a-proxy
I know of two ways of deleting an app under development from the emulator:
Using the emulator GUI: Settings >
Applications > Manage Applications >
Uninstall
Using ADB: adb uninstall
I may have discovered a third way, using 'adb shell':
rm /data/app/<package>.apk
It seems, however, that this isn't really a good way to delete apps because there may be additional information associated with it (registration?).
What is that information and where can it be found?
It's interesting you mention this. I ran a quick home made test to shed some light onto your question.
Generally, when you install a .apk file, Android creates an internal storage area for it located at /data/data/< package name of launching activity>. This is mainly used as an internal caching area that cant be accessed by other apps or the phone user. You can read up about that in a little bit more detail in the Internal storage chapter of Androids data storage section. It is an area exclusively used by your app and you can write private data there.
Once you uninstall an app theoretically, this internal storage area is also deleted. The first 2 ways which you outlined indeed does that: the .apk file in /data/app/ is deleted aswell as the internal storage area in /data/data/.
However if you used adb shell and run the rm command, all that is removed is the .apk file in /data/app/. The internal storage area in in /data/data/ is not deleted. So in essence you are correct that additional information with the app is not necessarily deleted. But on the flip side, if you reinstall the app after running the command, then the existing internal storage area gets overwritten as a fresh copy of it is being installed.
adb uninstall com.example.test
com.example.test may vary acording to your app.
I was having a problem with this too. I have Link2SD on my phone, but the ext4 partition on my SD card corrupted, so I reformatted, but all of the linked files were still in the /data/app folder. So I created a script to delete all broken links, and ran into the same problem as you, the app manager said they were still installed! so I made another script to fix that, using the pm program on your phone.
heres my code to remove broken links from the app folder:
fixln.sh
#!/system/bin/sh
#follow and fix symlinks
appfolder="/data/app/"
files=`ls ${appfolder}*`
fix=$1
badstring="No such file or directory"
for i in $files
do
if [ -h $i ]
then
if [ -a `readlink $i` ]
then
echo -e "\e[32m$i is good\033[0m";
else
if [ $fix == "fix" ]
then
`rm $i`
echo -e "\e[31m$i is bad, and was removed\033[0m";
else
echo -e "\e[31m$i is bad\033[0m";
if
fi
else
echo -e "\e[36m$i is not a symlink\033[0m";
fi
done
and heres my code to uninstall apps that have no apk:
fixmissing.sh
#!/system/bin/sh
#searches through a list of installed apps, and removes the ones that have no apk file
appfolder="/data/app/"
fix=$1
installed=`pm list packages -f -u`
for i in $installed
do
usefull=${i#*:}
filename=${usefull%=*}
package=${usefull#*=}
if [ -a $filename ]
then
echo -e "\e[32m$package ($filename) is good\033[0m"
else
if [ "$fix" == "fix" ]
then
uninstall=`pm uninstall $package`
if [ "$uninstall" == "Success" ]
then
echo -e "\e[31m$package ($filename) is bad, and was removed\033[0m"
else
echo -e "\e[31m$package ($filename) is bad, and COULD NOT BE REMOVED\033[0m"
fi
else
echo -e "\e[31m$package ($filename) is bad\033[0m"
fi
fi
done
copy these files to your phone, and run them with no arguments to see what they find, or add fix onto the end (fixmissing.sh fix) to make them fix what they find. Run at your own risk, and back up your files. I am not responsible if this code in any way wrecks anything.
If anyone wants to update/merge these scripts together, thats fine. these were just made to fix my problem, and they have done so, just thought I'd share them.
I believe any files the app has created on the sdcard would not be deleted.
There is another way - using the emulator like a real device -
locate the app in the emulator and drag it up to uninstall it.