I have a running Scala process and want to get the contents of a List in that process. I know the PID of the process and I know the name of the List[String], and I have taken a heap dump with VisualVM. Is there a way for me to find the actual contents of that specific list and save it somewhere?
If the List[String] instance is referenced by a class (for example via a val) than you can look for the class that holds it.
You can download Eclipse Memory Analyzer (MAT) and open your heap dump.
You can then click the 'Dominator tree' and in the top of the table you can type the name of the class that holds your list.
If you have found the class right-click it and select 'List objects -> With Incoming References`, that should give you the instances of the class that all could potentially hold the list.
Right click one of the instances and select 'List objects -> With Outgoing References', that should give you a tree structure where you would find your list
Note that once you find your list, you can check out the panel on the left (the inspector panel), that contains readable information.
Note: the above steps are from the top of my head, so they might not be completely accurate. This should however give you a good sense of direction.
Good luck!
I'm sure in principle it is possible, but surely there's nothing simple or straightforward and off-the-shelf to allow you to do so.
I'd probably go with using the Java Platform Debugger Architecture (JPDA) and its Java Debugging Wire Protocol (JDWP) to get at the raw information you'd need. From there you can use Java and / or Scala reflection to discover what to query in the target JVM.
I don't know how much of this is applicable to heap dumps. In the old days, the C / Unix debugging tools could operate on either core dumps or active processes.
Related
I've been given the task of researching whether one can use Powershell to automate the managing of References in VB6 application and then compile it's projects afterwards.
There are 3 projects. I requirement is to remove a specific reference in each project. Then, compile projects from bottom up (server > client > interface) and add reference back in along the way. (remove references, compile server.dll >add client reference to server.dll, compile client.dll > add interface reference to client.dll, compile interface.exe)
I'm thinking no, but I was still given the task of finding out for sure. Of course, where does one go to find this out? Why here of course, StackOverflow.
References are stored in the project .VBP files which are just text files. A given reference takes up exactly one line of the file.
For example, here is a reference to DAO database components:
Reference=*\G{00025E01-0000-0000-C000-000000000046}#5.0#0#C:\WINDOWS\SysWow64\dao360.dll#Microsoft DAO 3.6 Object Library
The most important info is everything to the left of the path which contains the GUID (i.e., the unique identifier of the library, more or less). The filespec and description text are unimportant as VB6 will update that to whatever it finds in the registry for the referenced DLL.
An alternate form of reference is for GUI controls, such as:
Object={BDC217C8-ED16-11CD-956C-0000C04E4C0A}#1.1#0; tabctl32.ocx
which for whatever reason never seem to have a path anyway. Most likely you will not need to modify this type of reference, because it would almost certainly break forms in the project which rely on them.
So in your Powershell script, the key task would be to either add or remove the individual reference lines mentioned in the question. Unless you are using no form of binary compatibility, the GUID will remain stable. Therefore, you could essentially hardcode the strings you need to add/remove.
Aside from all that, its worth thinking through why you need to take this approach at all. Normally to build a VB6 solution it is totally unnecessary to add/remove references along the way. Also depending on your choice of deployment techniques, you are probably using either project or binary compatibility which tends to keep the references stable.
Lastly, I'll mention that there are existing tools such as Kinook's Visual Build Pro which already know how to build groups of VB6 projects and if using a 3rd party tool like that is an option, could save you a lot of work.
With intellij idea, how do I find out what makes a variable be visible?
An example of when it is hard:
Suppose you look at class A, and you see a variable something. If you jump to source you see that it's defined in trait X. But you don't extend trait X directly. What do you extend, then, that makes this variable visible? If you have a deeply nested hierarchy, tracking can be hard.
Any recommendations or solutions?
EDIT: Please vote for the feature if you're interested: http://youtrack.jetbrains.com/issue/IDEA-124369
I don't think that IntelliJ IDEA has any shortcut for "finding what makes a variable visible".
However you can determine it using the "Find Usages" option (Alt + F7). For example:
import java.nio._
object TempObj extends App {
def func = 2
val p = file.Paths.get("some-path")
func
}
So Find Usages on "file", tells you that its from the Package "file" (in heading of the new Tab it also shows the complete package name, ex: Find Usages of java.nio.file in Project Files).
Whereas Find Usages on func will tell you that its a Method (And the Tab heading now says: Find Usages of func() in Project and Libraries)
So now in way you can determine, what exactly makes the variable visible. This also works for imports since it shows the package from which it is imported and you can then look for import of that packages.
I know of two almost-solutions to this problem.
Go-to-declaration, as you mentioned, solves this problem in the case of local variables.
More generally, the "find usages" feature gives you a neat little breakdown by type and file of different uses of the variable. From this you can see if it's involved in a static import.
It's not perfect, but with a moment's thought these two are generally sufficient to figure out what you want.
Use ctrl+b or F4 to jump to source code. Alternatively you can use ctrl+shift+a to get option/action. You can find shortcuts at http://gaerfield.github.io/ide-shortcuts/ as well. Hope it will help.
From what I understood you want to see the code that creates an Object you use, for instance Mystery someMystery;.
That gives you two options to populate someMystery:
someMystery = ... where ... is your code to populate
someMystery and if that is the case you should follow
that code (with ctrl+B as far as you need to) to the point where it
actually creates the Mystery object.
Use CDI to populate that object instance for you, in which case you should look into the CDI mechanism in order to see in what way the object instance is populated.
In either way IMO there is no way to know for sure if the someMystery instance is of some more concrete class than Mystery, because it is decided in runtime, not in compile time, so your next bet would be to run the program in debug and see what object goes into someMystery, although you are not guaranteed to get the same type of object every time.
PS. My answer is based entirely on my java understanding of the topic, can't say if it is valid for scala also.
This might not be exactly the answer you were hoping to get.
However, quoting yourself,
If you have a deeply nested hierarchy, tracking can be hard.
Have you considered using composition over inheritance? Perhaps this would remove the need for the feature you are looking for.
Deeply nested hierarchy doesn't sound good. I understand your pain about that.
When you override vals or defs there is a little circle next to the line number that shows where it is from even when it is from nested hierarchy. Hovering over vals with the command key down also shows you a little tooltip where it is from.
Does this help?
https://youtu.be/r3D9axSlBo8
if you want class, field or method to be visible, you need to implement them as public. If it was your question.
Is there a way to find complete class info of an object in Lazarus. F1 doesn't work.
For example, I want to know the methods, events and properties of TSQLQuery. More specifically, I'm trying to find what constants I can use with the state property.
The docs I've found so far aren't really much help in this context.
I've also tried the menu that says 'object browser' but it simply points to the properites window.
TSQLQuery and its unit sqldb is not documented.
The state property however is from the base tdataset ancestor of sqlquery, and that IS documented.
Try typing TDatasetstate or tdataset and press F1
The best documentation is the source code. After you dropped a TSQLQuery on the form CTRL-click on the identifier "TSQLQuery" in the source editor. Lazarus will open the corresponding source file at the position where TSQLQuery is declared. Scroll down to the public methods or published properties to see everything you need. Identifiers usually are self-explanatory - the chm file often does not contain more info. And the source is always up-to-date.
You can do the same with any identifier. Depending on the Lazarus version you may land in the implementation part of the unit. In this case, just press SHIFT-CTRL Up/Down to go to the interface.
EDIT: I completely re-wrote the question since it seems like I was not clear enough in my first two versions. Thanks for the suggestions so far.
I would like to internationalize the source code for a tutorial project (please notice, not the runtime application). Here is an example (in Java):
/** A comment */
public String doSomething() {
System.out.println("Something was done successfully");
}
in English , and then have the French version be something like:
/** Un commentaire */
public String faitQuelqueChose() {
System.out.println("Quelque chose a été fait avec succès.");
}
and so on. And then have something like a properties file somewhere to edit these translations with usual tools, such as:
com.foo.class.comment1=A comment
com.foo.class.method1=doSomething
com.foo.class.string1=Something was done successfully
and for other languages:
com.foo.class.comment1=Un commentaire
com.foo.class.method1=faitQuelqueChose
com.foo.class.string1=Quelque chose a été fait avec succès.
I am trying to find the easiest, most efficient and unobtrusive way to do this with the least amount of manual grunt work (other than obviously translating the actual text). Preferably working under Eclipse. For example, the original code would be written in English, then externalized (to properties, preferably leaving the original source untouched), translated (humanly) and then re-generated (as a separate source file / project).
Some trails I have found (other than what AlexS suggested):
AntLR, a language parser / generator. There seems to be a supporting Eclipse plugin
Using Eclipse's AST (Abstract Syntax Tree) and I guess building some kind of plugin.
I am just surprised there isn't a tool out there that does this already.
I'd use unique strings as methodnames (or anything you want to be replaced by localized versions.
public String m37hod_1() {
System.out.println(m355a6e_1);
}
then I'd define a propertyfile for each language like this:
m37hod_1=doSomething
m355a6e_1="Something was done successfully"
And then I'd write a small program parsing the sourcefiles and replacing the strings. So everything just outside eclipse.
Or I'd use the ant task Replace and propertyfiles as well, instead of a standalone translation program.
Something like that:
<replace
file="${src}/*.*"
value="defaultvalue"
propertyFile="${language}.properties">
<replacefilter
token="m37hod_1"
property="m37hod_1"/>
<replacefilter
token="m355a6e_1"
property="m355a6e_1"/>
</replace>
Using one of these methods you won't have to explain anything about localization in your tutorials (except you want to), but can concentrate on your real topic.
What you want is a massive code change engine.
ANTLR won't do the trick; ASTs are necessary but not sufficient. See my essay on Life After Parsing. Eclipse's "AST" may be better, if the Eclipse package provides some support for name and type resolution; otherwise you'll never be able to figure out how to replace each "doSomething" (might be overloaded or local), unless you are willing to replace them all identically (and you likely can't do that, because some symbols refer to Java library elements).
Our DMS Software Reengineering Toolkit could be used to accomplish your task. DMS can parse Java to ASTs (including comment capture), traverse the ASTs in arbitrary ways, analyze/change ASTs, and the export modified ASTs as valid source code (including the comments).
Basically you want to enumerate all comments, strings, and declarations of identifiers, export them to an external "database" to be mapped (manually? by Google Translate?) to an equivalent. In each case you want to note not only the item of interest, but its precise location (source file, line, even column) because items that are spelled identically in the original text may need different spellings in the modified text.
Enumeration of strings is pretty easy if you have the AST; simply crawl the tree and look for tree nodes containing string literals. (ANTLR and Eclipse can surely do this, too).
Enumeration of comments is also straightforward if the parser you have captures comments. DMS does. I'm not quite sure if ANTLR's Java grammar does, or the Eclipse AST engine; I suspect they are both capable.
Enumeration of declarations (classes, methods, fields, locals) is relatively straightforward; there's rather more cases to worry about (e.g., anonymous classes containing extensions to base classes). You can code a procedure to walk the AST and match the tree structures, but here's the place that DMS starts to make a difference: you can write surface-syntax patterns that look like the source code you want to match. For instance:
pattern local_for_loop_index(i: IDENTIFIER, t: type, e: expression, e2: expression, e3:expression): for_loop_header
= "for (\t \i = \e,\e2,\e3)"
will match declarations of local for loop variables, and return subtrees for the IDENTIFIER, the type, and the various expressions; you'd want to capture just the identifier (and its location, easily done by taking if from the source position information that DMS stamps on every tree node). You'd probably need 10-20 such patterns to cover the cases of all the different kinds of identifiers.
Capture step completed, something needs to translate all the captured entities to your target language. I'll leave that to you; what's left is to put the translated entities back.
The key to this is the precise source location. A line number isn't good enough in practice; you may have several translated entities in the same line, in the worst case, some with different scopes (imagine nested for loops for example). The replacement process for comments, strings and the declarations are straightforward; rescan the tree for nodes that match any of the identified locations, and replace the entity found there with its translation. (You can do this with DMS and ANTLR. I think Eclipse ADT requires you generate a "patch" but I guess that would work.).
The fun part comes in replacing the identifier uses. For this, you need to know two things:
for any use of an identifier, what is the declaration is uses; if you know this, you can replace it with the new name for the declaration; DMS provides full name and type resolution as well as a usage list, making this pretty easy, and
Do renamed identifiers shadow one another in scopes differently than the originals? This is harder to do in general. However, for the Java language, we have a "shadowing" check, so you can at least decide after renaming that you have an issues. (There's even a renaming procedure that can be used to resolve such shadowing conflicts
After patching the trees, you simply rewrite the patched tree back out as a source file using DMS's built-in prettyprinter. I think Eclipse AST can write out its tree plus patches. I'm not sure ANTLR provides any facilities for regenerating source code from ASTs, although somebody may have coded one for the Java grammar. This is harder to do than it sounds, because of all the picky detail. YMMV.
Given your goal, I'm a little surprised that you don't want a sourcefile "foo.java" containing "class foo { ... }" to get renamed to .java. This would require not only writing the transformed tree to the translated file name (pretty easy) but perhaps even reconstructing the directory tree (DMS provides facilities for doing directory construction and file copies, too).
If you want to do this for many languages, you'd need to run the process once per language. If you wanted to do this just for strings (the classic internationalization case), you'd replace each string (that needs changing, not all of them do) by a call on a resource access with a unique resource id; a runtime table would hold the various strings.
One approach would be to finish the code in one language, then translate to others.
You could use Eclipse to help you.
Copy the finished code to language-specific projects.
Then:
Identifiers: In the Outline view (Window>Show View>Outline), select each item and Refactor>Rename (Alt+Shift+R). This takes care of renaming the identifier wherever it's used.
Comments: Use Search>File to find all instances of "/*" or "//". Click on each and modify.
Strings:
Use Source>Externalize strings to find all of the literal strings.
Search>File for "Messages.getString()".
Click on each result and modify.
On each file, ''Edit>Find/Replace'', replacing "//\$NON-NLS-.*\$" with empty string.
for the printed/logged string, java possess some internatization functionnalities, aka ResourceBundle. There is a tutorial about this on oracle site
Eclipse also possess a funtionnality for this ("Externalize String", as i recall).
for the function name, i don't think there anything out, since this will require you to maintain the code source on many version...
regards
Use .properties file, like:
Locale locale = new Locale(language, country);
ResourceBundle captions= ResourceBundle.getBundle("Messages",locale);
This way, Java picks the Messages.properties file according to the current local (which is acquired from the operating system or Java locale settings)
The file should be on the classpath, called Messages.properties (the default one), or Messages_de.properties for German, etc.
See this for a complete tutorial:
http://docs.oracle.com/javase/tutorial/i18n/intro/steps.html
As far as the source code goes, I'd strongly recommend staying with English. Method names like getUnternehmen() are worse to the average developer then plain English ones.
If you need to familiarize foreign developers to your code, write a proper developer documentation in their language.
If you'd like to have Javadoc in both English and other languages, see this SO thread.
You could write your code using freemarker templates (or another templating language such as velocity).
doSomething.tml
/** ${lang['doSomething.comment']} */
public String ${lang['doSomething.methodName']}() {
System.out.println("${lang['doSomething.message']}");
}
lang_en.prop
doSomething.comment=A comment
doSomething.methodName=doSomething
doSomething.message=Something was done successfully
And then merge the template with each language prop file during your build (using Ant / Gradle / Maven etc.)
Can anyone share his experience on workflow for R peject development under ESS? I tried several times to learn emacs but I have not get it yet. I can understand ESS as an editor, but is there a project view in ESS? what's the efficient ways to set up/view R project directory, coding, and testing, and how's ESS has an edge to facilitate the whole process?
Do you use ESS as a good R editor only or tend to emulate a R IDE environment within ESS?
Thanks for any advices.
It sounds like you're asking two separate questions.
One question concerns workflow and the other concerns using ESS.
As I use StatET and Eclipse, I'll just share my experience regarding the workflow aspect of your question.
As with Vincent I also follow something like the workflow set out by Josh Reich here (also see Hadley's useful comments):
Workflow for statistical analysis and report writing
Although it can vary between projects, I tend to have a couple of main R files
import.R: this imports data files and does any necessary cleaning and manipulation
analyse.R: This generates the output that I need for any final report
main.R: This calls import.R and analyse.R
The aim is for import.R and analyse.R to represent the complete and final workflow for producing the final results of any analyses.
In terms of a directory structure for an analysis project, I'll often also have the following folders
data: for storing any raw data files
meta: for storing meta data, such as variable labels, scoring systems for tests, recoding information, etc.
output: for storing any graphics, tables, or text generated by my analyses that I might want to incorporate into an external program
temp: When exploring the data and brainstorming analyses, I like to type code into files instead of using the console. I tend to label these temp1.R, temp2.R, temp3.R. I store these in a temp folder. That way I have a permanent record that's easily accessible. If the analyses become final they get incorporated into one of the main R files (i.e., import.R or analysis.R)
functions: If I think that a function will be needed across a couple of projects, I often place it one function per file or a set of related functions in a file in a folder called functions. This makes it relatively easy to reuse functions across projects, when the formal requirements of package development are more than needed.
library: If I want to create some general functions that I think will be project specific, I'll place them in this folder
save: A folder to store any saved R objects
StatET and Eclipse make it easy to interact with such a file system.
Of course, given all the R gurus that use ESS and Emacs, I'm sure it also handles interactions with the file system well.
I'm not exactly sure what you expect as an answer on this one. I, for one, have stolen (and adapted) a system that was suggested here a little while ago (by Josh Reich):
Create a folder for every project, and split up your work in a bunch of different .R files:
Load.R for getting your raw data into R;
Prep.R for cleaning the data, recoding variables, etc.;
Func.R for coding any custom functions you will need for evaluation; and
Eval.R for running your final stuff.
If that doesn't fit your style, just change it.
Then, you can either have a master file to call each of the parts one after each other (good for reproducibility), or save at different stages and have the individual scripts load the appropriate data (good if some of the prep work is very computationally/time intensive).
**
On a different note, the trick that is posted at the link really helped me get into ESS. It turns Shift-Enter into a one-stop-ESS-shop: http://www.kieranhealy.org/blog/archives/2009/10/12/make-shift-enter-do-a-lot-in-ess/
Others have given you some good ideas about how to setup your directory/file structure for a project.
You also asked about "project views," in which case you might want to look into the Emacs Code Browser (ECB).
You can find some screen shots of it in action on its site, here:
http://ecb.sourceforge.net/screenshots/index.html