I am a newbie with installation products ie., install4j
I am having trouble getting a same set of files installed in different folders ( based on their existence )
say for following three folders
C:\company\lib
C:\company\32bit\lib
C:\company\64bit\lib
if they are present; then I should copy a set of jars there.
I tried having three different "Install files" section under Installation component. At any point of time I am getting only one set of "Install files" getting to work. ie., if I have lib and 64bit\lib.. then it is getting copied one of the folders and proceeds with the Program Group...
Or is there a simpler way to do this?
You have to configure different file sets on "Files->Define distribution tree". See this help topic for an explanation.
Related
Many thanks in advance, I am using advanced installer 12.1, the scenario is we have already installed application with some custom location feature and is extends the default application location, this installation creates some folders to store temporary files like "Temporary" folder, this folder is used by the application on every minute basis and hence there are some files in this folder, now issue is when i run a new build or try to install the new version of the application, i again select the another custom location, before finishing the installation the installer deleting all the folders installed with older version but not deleting the folders which contains files created by the application e.g the temporary directory above is deleted if it is empty but when it is non-empty it is not removed.
Solution i tried:
1) I used file Removal tool to remove the file, but i think it point the current location and not pointing the older application path.
2) A custom VB script, but again the same issue as #1
3) I tried uninstall cleanup wizard, result #1
Please guide me how i can delete that folder, any help would be appreciated.
Thanks
Is there a way to make Progress Developer Studio 3.7 (Eclipse) generate all the wrx files (from the ocx) and place them in for example the rcode folder?
Clarification:
I dont know even how to make one wrx file. Have heard this "They get automatically created as soon as you drop an OCX control onto an ABL frame". But if you have removed that file, can you create it anew without having to redrop the control? And how do you automatically place it in a certain folder?
wrx files contain the properties of an ActiveX you set in the appbuilder.
If you loose the wrx, those properties revert back to default values. You should check-in the wrx files into your version control system together with the source .
To copy the wrx to the rcode directory I use robocopy.
suppose your sources are in a directory named src then you can copy them using
robocopy src rcode *.wrx /s
The wrx-file is generated when compiling in the AppBuilder.
See this entry in the Progress Knowledge base
I have three files ImgProc.h, ImgProc.lib, and ImgProc.dll created by Matlab. I imported them to my VSC++ 2012 MFC project, but when I ran it, the error occurred. I did add the ImgProc.lib into the linker-> input->additional dependencies, Copied 3 files into project directory.
I could not add references. Because when I tried, it was empty like:
that
I really appreciate if someone could help me.
ImgProc.dll must be available at runtime in your application's directory. You need to manually copy this file to your output directories for both Debug and Release builds. Alternatively you can create a post-build step that does the copying. Having ImgProc.dll in your project directory is not enough - your project directory is not part of the Dynamic-Link Library Search Order.
I have a custom screen step displaying checkbox options for web.config specific to each environments (DEVINT, QA, Stage,Prod) as part of MSI installation.
Once the user selects QA as option then the web.qa.config file is renamed to web.config file
After the complete installation, I see that there are other web.config files ( web.DEVINT.config,web.stage.config,web.prod.config) still present in the folder.
I want to remove the other web.config files web.DEVINT.config,web.stage.config,web.prod.config
after the installation is completed.
Can anyone help me to resolve this issue.
Thanks & Regards,
Santosh Kumar Patro
A RadioBox would seem a better choice then a Checkbox since I would imagine the choices are mutually exclusive. Use the property associated with the control as conditions on the component so that only one of them gets installed.
Windows Installer will complain (ICE Valication) if multiple components install the same key path. What I do to get around this is to make the keys paths go to a subdirectory such as Configs\Web.LifeCycle.Config so that each is unique. Then I use the DuplicateFile table to clone that file to the real directory \ web.config path. The downside is I deploy a subdirectory/file that isn't needed but the upside is I can use it to quickly know what was picked and have a backup of the file to compare against in case someone goes and modifies the real web.config.
In limited scenarios I use AppSearch to autodetect the life cycle instead of showing a UI at all.
As I need to develop java, php, c++, I use several eclipse packages.
so I try to simple to copy several packages into one, and then I use these option to start the eclipse:
1. -clean
2. osgi.checkConfiguration=true
but it doesn't work, I only find the last copied packages after the IDE start.
Get one of the packages from their site and use the Install new software... feature under the help menu.
I think the most straightforward way to get the modules for all of the languages to play nicely together, though I admire your DIY spirit.
Try to use Yoxos for building your custom Eclipse distribution.
From luxsie:
How to merge several setup packages of Eclipse?
Whom this is for?
The ones that can not hold back their temper any longer when trying to install another Eclipse function package. Right the installation speed from some countries is too slow to bear, also the Equinox P2 always try to connect the Download.Eclipse.org. Much to damn.. when your Internet connection closed or reset all of a sudden and got all downloaded files broken. Also OSGi based Eclipse plugins is chaos -- always have some conflict errors.
Oh that is another problem..
Do the following steps:
1 Download the Install Packages that you need from www.eclipse.org. Also please remember verify to see if that is correct package. I choosed J2EE with C/C++.
2 Unpack one package with uncompress softwares, such as 7-zip and WinRAR. unzip all the files to a directory you wanna install to. for example "D:\Eclipse\".
3 open Configurations. Files "\configuration\org.eclipse.equinox.source\source.info" and "\configuration\org.eclipse.equinox.simpleconfigurator\bundles.info" in the installation directory is the ones that need to be merged. also you need "\configuration\org.eclipse.update\platform.xml".
4 open the other packages and fetch their configuration files, and merge files.
to Bundles.info:
Open the bundle.info with any Functional Text Editor, copy all text begin from the line after "#version={Number}" and paste it to another. [{Number} means any Integer number.]
to Source.info:
Similiar with what you did with the bundle.info. If not modified, that line should be the 3rd line in the text file.
to Platform.xml:
Open the file, then find where "feature id=" starts just after the "site" node. Find the "/site" tag and copy all the text between them, paste to another file just before the "/site" tag.
[You can do the similiar also marked feature tags with artifacts.xml]
5 when merging i suggest you to make a new directory and when finished please remember copy the merged file to the one where should it be and overwrite. [I mean where it comes from]
Although not merge "platform.xml" will not cause any functional errors, it will make the About dialog with no button -- to ugly yeah?
[= =|||]Ugly is caused by the artifacts.xml in the installation directory...
6 Open all the package, find "plugins" and "features" directories.now extract!
first extract the one you want most. I extracted JEE package.
then extract the other ones. I don't see any problem whether Overwrite the ones or not.
7 do open a console window, and locale in the installation directory, and then execute "eclipse.exe".
Well, somebody ask me why i paid no attention to the Artifacts.xml in the installation directory. That's because Eclipse will never check the file. It seems to be when you want to update using zip files -- however this way is blocked for lacking site.xml file now.
Then guys, wait a several minutes for eclipse to do some sorting and cleaning job for the merged configurations.. and install your plugins!
INFO: if you face some problems after install a new plugin and restart.. that is because you haven't finish a complete artifacts.xml merging.
You may delete all the artifacts.xml 's header [document start to the "artifacts size = '{Number}'"] and its bottom [from "/artifacts" to document end]. just merge the left content. and make one file just contains the header and bottom, paste the merged one in.
Eh..maybe you can calculate the {Number}s' sum and correct the one in the final document.