I am using Ubuntu 12.04. I have installed doxygen 1.8.3.1 using make install.
I would like to uninstall the doxygen built by make, but I don't find any way to do it using make (uninstall or clean...).
In the Makefile there is no reference to uninstall it the software. :(
Unfortunately I can't use the sudo apt-get remove doxygen because it wasn't an installed. :(
I don't find anything related on the internet.
Can anyone help me, please?
Thank you in advance,
Fabiola
There is no "uninstall" target. You need to do a "rm" be hand. If you used the standard prefix path "/usr/local" then
rm /usr/local/bin/doxygen
rm /usr/local/man/man.1/doxygen.1
(more if you install the docs are wizard). Depend on the user used for install, you need sudo to do it.
I know this question is old, but since it is the first result in google I would like to share another way of uninstalling Doxygen built from source. In the build directory where you've ran make there should by a file name install_manifest.txt. That file contains paths to files that were installed using make install command. All you need to do is to run the following command:
sudo xargs rm < install_manifest.txt
Of course this assumes that you've kept the build directory or at least the install_manifest.txt file. If not you need to remove the files by hand as somebody already suggested.
Related
After conscientiously following the install instructions on Linux from swift.org, I encounter an issue where it is not possible to compile anything on a Ubuntu 18.04 machine. The REPL seems to work but during compilation (when calling swift build) the following error appears:
/usr/bin/ld: cannot find -lstdc++
There are more details in the full bug report [SR-9093]. I don't know at all what to do to solve this issue, there are similar problems already mentioned in other bug reports, for instance on this really old one [SR-35].
What should I do?
Thank you
I am assuming that you had already installed the libstdc++ successfully and you have set the permissions properly. But I really doubt that it was installed correctly but it was installed with corruption of some sort. The corruption occurred because you didn't install libstdc++ via a package manager. Result was some form of weirdness in the package manager database which effected the overall functioning system. Exactly why adding something to a folder should change anything at all. I don't know why this happens, unless the folder is hot i.e symbolically linked to a program which doesn't have any tolerance for hacks like simply copying a file into the folder. So for now try to install the libstdc++ again. Below is the link to the file to again download the correct program and this is compatible with amd64.
http://security.ubuntu.com/ubuntu/pool/main/g/gcc-5/libstdc++6_5.4.0-6ubuntu1~16.04.10_amd64.deb
And below are some link to help
https://ubuntuforums.org/showthread.php?t=1425470
https://ubuntuforums.org/showthread.php?t=808045
https://ubuntuforums.org/showthread.php?t=808045
https://packages.ubuntu.com/search?keywords=libstdc%2B%2B
https://packages.ubuntu.com/xenial/amd64/libstdc++6
Install libstdc++
sudo apt install libstdc++6
It seems possible that the apt install did not run the ldconfig program, which should be run to add the library to the list of those which ld.so knows about.
It looks like you can do it manually:
sudo ldconfig
IMPORTANT CAVEAT: I don't have Ubuntu and haven't been able to test this. And it's a sudo command. Run at your own risk, YMMV, etc.
If this does not work, it's possible that a file called /etc/ld.so.conf is not set up to search the directory where libstdc++ ended up. I wouldn't dare try to describe how to fix that.
sudo apt install -f
The command above should install any missing dependencies.
After hours of searching Google and StackOverflow, I haven't been able to resolve this issue...
I'm trying to install Sphinx Search on my VPS, but I have absolutely no idea what I'm doing. All I know is that this search feature is extremely important to my project.
I've tried the following commands in puTTy to unpack the Sphinx tarball:
tar xzvf sphinx-2.0.6-release.tar.gz
tar -xzvf sphinx-2.0.6-release.tar.gz
It says there's no such file or directory. I know the file is there because I put it there myself, so I'm assuming now that I've misunderstood what is going on here.
Can someone get me past this step so that I can get lost on the next one?
It says there's no such file or directory. I know the file is there because I put it there myself,
Probably not in the right folder - need to 'cd' into the folder containing the file.
But as you dont seem that familer with linux, would suggest using the RPM file instead - so dont have to compile from source.
get the RPM from
http://sphinxsearch.com/downloads/release/
and then upload that. Then use "yum localinstall nameofrpmfile.rpm"
Check the output of uname -a to find if you have 64bit or 32bit system. If mentions x86_64 you have 64bit, and so want the x86_64 RPM file.
I'm trying to instal the cocos2d 2.0 XCode 4 templates but I keep getting errors when running the install script. I've tried to manually copy the templates but when I try to compile my project, it gives me a bunch of errors. Can anyone help?
Here are the errors that the install script throws at me:
http://pastebin.com/ZdmAxwef
Any help is greatly appreciated!
Thanks!
You probably install the cocos2d 1.x templates using root. Since installing as root isn't supported anymore, you first have to chown them back to your user.
There are three things you can try:
First, make sure you are running install-templates.sh as sudo
cd *location of cocos2d-2.0 folder*
sudo ./install-templates.sh -u -f
where -f forces the installation
Second, you may need to change the install-templates.sh script to install to a different location (try both your user and directly to the Machintosh HD)
Third, (which is what i often have done in the past) is copy the folders over to the correct directory (or at least make the directories the mkdir are failing on and try again)
I followed these exact instructions
cd /src/cocos2d-iphone-2.0/
./install-templates.sh -f
which i found here http://www.cocos2d-iphone.org/wiki/doku.php/prog_guide:migrate_to_v2.0
side note- on my mac hard drive "Macintosh HD" i created a folder src and copied the cocos2d-iphone-2.0 folder in it. and im running mountain lion and Xcode 4.4
this worked perfectly for me.
hope this helps
This is many years ago
The Solution is simple now, you know longer need to do any of this just.
install the latest version of Cocos2D from
cocos2d-swift.org
it will install everything automatically including the templates. just start a new Xcode project and it just be there in the template options
I'm using Solaris 10, ksh. Whenever I do a ./configure, I get the error "ksh: ./configure: not found"
When I do a "where configure", nothing is found.
How do I "install configure"?
./configure means that you want to run an executable called configure in your current directory (signified by a .). I'm guessing you're trying to build and install from source, and the directions say to do the standard ./configure; make; make install. You should do that from the top-level directory of the source you downloaded and unpacked:
$ cd /path/to/source
$ ./configure
$ make
$ make install
"./configure" means "run the program configure from the current directory". That is, you need to cd to the directory that configure lives in before attempting to run it like that.
As for where configure might be found, it's usually at the root of whatever source package you're trying to build.
I'm not a Solaris guy, but the configure script should be within your current directory before you execute it. I am assuming you're trying to build something. If it's a project of your own, take a look at GNU autoconf. (I have no idea if this a part of Solaris or not.) It's part of M4.
If it's a project that you downloaded, untar/unzip/unpack it and then cd to its directory before running the configure script.
I had to run a command for another directory; and then that popped everything up :)
In case someone else comes across this specific issue, I'm trying to install the Perl-Php plugin on a Solaris machine. Initially, there is no configure file; instead you have to find where your "phpize" is located -- for me it was /opt/webstack/php/5.2/phpize, run it while you are still in the "perl-php-plugin" folder, and then configure will appear.
Then you can ./configure :)
Thanks to everyone who responded.
How can I get PDO to work on my mac (os x 10.5)? I'm using the built in php and php in Zend/Eclipse. Can't seem to find useful drivers for it at all.
I had to install the PDO_PGSQL driver recently on Leopard, and I ran across a multitude of problems. In my search for answers, I stumbled across this question. Now I have it successfully installed, and so, even though this question is quite old, I hope that what I've found can help others (like myself) who will undoubtedly run into similar problems.
The first thing you'll need to do is install PEAR, if you haven't done so already, since it doesn't come installed on Leopard by default.
Once you do that, use the PECL installer to download the PDO_PGSQL package:
$ pecl download pdo_pgsql
$ tar xzf PDO_PGSQL-1.0.2.tgz
(Note: you may have to run pecl as the superuser, i.e. sudo pecl.)
After that, since the PECL installer can't install the extension directly, you'll need to build and install it yourself:
$ cd PDO_PGSQL-1.0.2
$ phpize
$ ./configure --with-pdo-pgsql=/path/to/your/PostgreSQL/installation
$ make && sudo make install
If all goes well, you should have a file called "pdo_pgsql.so" sitting in a directory that should look something like "/usr/lib/php/extensions/no-debug-non-zts-20060613/" (the PECL installation should have outputted the directory it installed the extension to).
To finalize the installation, you'll need to edit your php.ini file. Find the section labeled "Dynamic Extensions", and underneath the list of (probably commented out) extensions, add this line:
extension=pdo_pgsql.so
Now, assuming this is the first time you've installed PHP extensions, there are two additional steps you need to take in order to get this working. First, in php.ini, find the extension_dir directive (under "Paths and Directories"), and change it to the directory that the pdo_pgsql.so file was installed in. For example, my extension_dir directive looks like:
extension_dir = "/usr/lib/php/extensions/no-debug-non-zts-20060613"
The second step, if you're on a 64-bit Intel Mac, involves making Apache run in 32-bit mode. (If there's a better strategy, I'd like to know, but for now, this is the best I could find.) In order to do this, edit the property list file located at /System/Library/LaunchDaemons/org.apache.httpd.plist. Find these two lines:
<key>ProgramArguments</key>
<array>
Under them, add these three lines:
<string>arch</string>
<string>-arch</string>
<string>i386</string>
Now, just restart Apache, and PDO_PGSQL will be up and running.
Take a look at this PECL package: PDO_PGSQL
I haven't tried it myself, but I've been interested in playing with Postgres as an alternative to MySQL. If I have a chance to try it soon, I'll throw my results up here in case it helps.
I'm not sure this will help with the PDO drivers specifically, but you might look into BitNami's MAPPStack.
I had a ton of trouble with Postgres, PHP, and Apache on my Mac, some of it having to do with 64- vs 32-bit versions of some or all of them. So far, the BitNami MAPPStack install is working nicely in general. Maybe it will help with your PDO issues as well.
Install new php version via brew and restart server, and php -v, all issues are removed.
This is what worked for me
brew install php55-pdo-pgsql
This installs PHP 5.5.32 and PostgreSQL 9.5. I already had PostgreSQL 9.4 installed so I uninstalled the homebrew version with:
brew uninstall postgres
You then have to update /etc/apache2/httpd.conf to point to the correct PHP version and restart Apache:
LoadModule php5_module /usr/local/Cellar/php55/5.5.32/libexec/apache2/libphp5.so
My OSX version is Yosemite.