When installing Enthought Canopy 1.0 using the .sh installer, it places a lot of stuff in my home folder, even though I chose a different installing location.
Part of this is some directory ~/canopy with empty folders for scripts etc. - OK on that one, even though I would rather choose a different location for this, too.
The other part is ~/Enthought/Canopy_64bit with binaries and libraries. I do not want these to be in my (backed-up) home directory.
How do I move this stuff somewhere else? I can see that there is an entry in my ~/.bash_profile and at least also in ~/Enthought/Canopy_64bit/User/pyvenv.cfg pointing to that location. But are there more?
This should be made an option during the installation.
There is no officially supported way of doing this although there is a way to do it. We aren't comfortable documenting this workaround in a public archive like stack overflow. If you can please send us a "suggestion" through Canopy's Help menu and we'll respond with the workaround.
Related
TestNG... Is there any way to install this software in program files rather than user directory?
I have searched what seems like the entirety of the internet without any success. I have ran the install and visibly inspected every setting and do not see anywhere to change to a different directory.
I am attempting to install this software in a VMware Horizon environment and do not want anything saved in the user profile directory.
Hopefully someone can help! :)
Thank you in advance.
I've cloned it but I didn't find any .exe file, Nor do i see it in programs list in Control Panel of windows. I'am a bit confused as to what cloning means. I know that there is direct download .exe file on vim.org website. Its for sure that I'am beginner for all these. Please help. Thanks for the help in advance.
reading the "installation" section found in the README.md of the vim repo, you can see the filenames containing the instructions that will help you with the installation, depending on your OS.
README_ami.txt Amiga
README_unix.txt Unix
README_dos.txt MS-DOS and MS-Windows
README_mac.txt Macintosh
README_haiku.txt Haiku
README_vms.txt VMS
So, for the full information I suggest you go to those files, or go to the vim website where there is also good information about the installation.
Anyway, I will briefly explain below the information that those files and the vim website say for most common operating systems
If you're on Unix:
git clone https://github.com/vim/vim.git
cd vim/src
make
If you're on Mac
The Macintosh binaries are not on the Vim ftp site. They are produced by a few Macintosh lovers. Often they lag behind a few versions.
MacVim has more a Mac look and feel, is developed actively and most people prefer this version. Most of MacVim was made by Björn Winckler.
MacVim can be downloaded here: link
Or if you prefer, here is the MacVim homepage.
If you're on Windows:
The next instructions were copied from here.
Option A: Using the self-installing .exe
Go to vim.org/download.php and click on self-installing executable (or just click here) and follow the prompts.
Watch out for:
When an existing installation is detected, you are offered to first remove
this. The uninstall program is then started while the install program waits
for it to complete. Sometimes the windows overlap each other, which can be
confusing. Be sure the complete the uninstalling before continuing the
installation. Watch the taskbar for uninstall windows.
When selecting a directory to install Vim, use the same place where other
versions are located. This makes it easier to find your _vimrc file. For
example "C:\Program Files\vim" or "D:\vim". A name ending in "vim" is
preferred.
After selecting the directory where to install Vim, clicking on "Next" will
start the installation.
Option B: Using .zip files
Go to the directory where you want to put the Vim files. Examples:
cd C:\
cd D:\editors
If you already have a "vim" directory, go to the directory in which it is
located. Check the $VIM setting to see where it points to:
set VIM
For example, if you have
C:\vim\vim82
do
cd C:\
Binary and runtime Vim archives are normally unpacked in the same location,
on top of each other.
Unpack the zip archives. This will create a new directory "vim\vim82",
in which all the distributed Vim files are placed. Since the directory
name includes the version number, it is unlikely that you overwrite
existing files.
Examples:
pkunzip -d gvim82.zip
unzip vim82w32.zip
You need to unpack the runtime archive and at least one of the binary
archives. When using more than one binary version, be careful not to
overwrite one version with the other, the names of the executables
"vim.exe" and "gvim.exe" are the same.
After you unpacked the files, you can still move the whole directory tree
to another location. That is where they will stay, the install program
won't move or copy the runtime files.
Change to the new directory:
cd vim\vim82
Run the "install.exe" program. It will ask you a number of questions about
how you would like to have your Vim setup. Among these are:
You can tell it to write a "_vimrc" file with your preferences in the
parent directory.
It can also install an "Edit with Vim" entry in the Windows Explorer
popup menu.
You can have it create batch files, so that you can run Vim from the
console or in a shell. You can select one of the directories in your
$PATH. If you skip this, you can add Vim to the search path manually:
The simplest is to add a line to your autoexec.bat. Examples:
set path=%path%;C:\vim\vim82
set path=%path%;D:\editors\vim\vim82
Create entries for Vim on the desktop and in the Start menu.
That's it!
Vim is open source software, and its source code, i.e. all the technical files that make up Vim is (nowadays) hosted at GitHub.
Cloning that repository means you'll download all of those files to your computer (and with Git as the underlying revision control system, you'll even get the full history of all changes ever done). As Vim supports a very big set of very diverse platforms (Windows, Linux, Mac, ...), the repository itself does not (and should not) contain pre-built binaries, nor a full installer that most users expect to run. So, unless you have the intention to actively contribute to Vim by submitting bug fixes or enhancements, you don't need to clone or do anything with GitHub. If you do want to get technical, src/INSTALLpc.txt contains the instructions for building Vim on Windows. This includes choosing a compiler, installing it and the required dependencies, configuring the build, building, and then finally copying the files to a permanent location on your PC, either manually or by building and then running an installer.
For plain passive consumption of Vim (which is rewarding in itself, but may even lead you to eventually also programming it), the Downloading Vim page on vim.org has all the information that you need, with links to the most popular installers right at the top.
a word on versions
For a casual user, using the latest stable version is recommended; this is 8.2 right now; gvim82.exe is a corresponding installer for Windows. This offers the best compromise between stability and latest features. In the case of Vim, expect a new release roughly every year.
You'll also find development builds (something like 8.2.0740); these usually function as well and have the very latest features under development, but often are less stable. I would use these only if you really need a leading-edge feature, or want to report a bug. You should then probably update very frequently, and from there it's only a small step to actually cloning the repository and building everything on your own!
I have been running berrybrew on Windows
(here's the home page and GitHub repository).
I'm having some trouble with it and I want to uninstall and reinstall it, but I can't figure out how to do that.
I am hoping it is as simple as just deleting the directory where it was installed and C:\berrybrew, which is where it seems to keep files, but I don't know for sure. The instructions contain installation instructions, but no uninstallation instructions.
Disclaimer: berrybrew author here...
To uninstall and return your system back to default:
berrybrew off
berrybrew unconfig
then delete the directory you downloaded it to, as well as the installation directory (by default, C:\berrybrew)
Edit your PATH variable to remove any entries that start with C:\berrybrew (or the base install directory if you've changed it from the default). One of the path entries will point to C:\berrybrew\bin, and there may be one more that points to the currently in-use Perl installation (also under C:\berrybrew\...). Technically speaking, there shouldn't be any after the first two commands are run, but one should always verify
Essentially, there's really nothing to "uninstall". It comes down to removing $ENV{PATH} ie. specific environment variables that point to a) berrybrew.exe binary itself, and b) the Perl installation that you last used.
I will update the documentation to provide more clarity in this regard.
I've manually installed the latest Eclipse on our debian server and wanted to configure it so all users share the same configuration. It turned out less obvious than I thought: I don't seem to be able to install packages for all users. If I run it myself, all configuration data is saved under my own home directory. If I run Eclipse using sudo, everything is saved under the root directory but is not accessible for other users when they run Eclipse.
I've been browsing the manual of Eclipse and some forums, but apart from a "yes, you can" I couldn't find any information on how that should be done. The biggest problem is installing plugins for all users to be found. Any help is greatly appreciated.
Eclipse : 3.6.1 classic, installed using this procedure.
Server uname: GNU/Linux *** 2.6.26-2-amd64
Server is accessed using Putty, and Gnome desktop through realVNC. Just mentioning it if that is of any importance. Our sysadmin is on "prolonged leave" (working in Spain and never replaced), so I'm stuck without help here.
EDIT:
I've found a list of variables that could be set in the launcher.ini or config.ini regarding configuration : osgi.configuration.area, osgi.configuration.area.default, osgi.sharedConfiguration.area, osgi.configuration.cascaded, ... But I can't figure out exaclty how to set these correctly.
-- I asked this question also on Serverfault, but I am far from certain where this belongs. Feel free to merge both questions in the appropriate place. --
For plugins, you could add in eclipse.ini (for all Eclispe you install) a common path for "shared dropins directory".
All plugins copied in that directory will be detected when Eclipse is launched.
I am using ubuntu 8.04 and windows xp. I mount the fat32 disk which contains eclipse workspace to ubuntu. but I find I could not use the workspace, maybe I have no right to use it.
the fat32 disk I mounted has the 755 right,I try to use chmod to change it to 777 but failed. I try to mount it to 777 mode, but I find there is nothing about mode in vfat option.
How should I do next ? how could I share the workspace? Help me. thanks.
Instead of trying to share the raw workspace data between two different systems, I suggest to do it like in typical big software development projects. Use a version control system to store your code and commit/update to and from that version control system instead of sharing files.
This may not be the answer you were originally interested in, but rest assured, you will notice many advantages of that version control system after some time, including:
Easily get back to the code version before todays "genius" changes which didn't really work at the end
There is a backup of your project in case your workstation dies
You may even access your project from a completely different machine/location.
If your project is going to be open source, you can even use public services like Sourceforge.net.
I believe that the fat32 doesn't support the same kind of permissions as the linux ones you are familiar with. Once you have sorted out the rw option in /etc/mtab then I think you will have a better time.
However, the step after that is to have two different installations of Eclipse working on the same workspace.
I haven't had a lot of success with this (though haven't tried you're exact scenario), but I would be careful to:
keep the Eclipse versions in synch
only use relative paths, and relative to the workspace. This is probably good practice any way, but is worth repeating.
If all goes well, then you should be sharing everything, including preferences across both installations.
There are two refinements I can think of, which may be useful to reason about, if not actually do:
you could probably share most of the installation of eclipse (the plugins and features directory, if not the config.ini and eclipse.ini files). If you can't put both executables in the same directory, consider the -install and -configuration runtime options.
if you can't do any of these things, then you may need to work on two parallel workspaces. You can keep them in synch with tools such as rsync or even a distributed source control like Mercurial.
I agree with bananeweizen.myopenid, and have the following tip to add:
When creating your build path entries, reference all outside resources (eg, jarfiles) using classpath variables. This will allow you to move the .classpath file between environments (or even check it into source control, if you're the sole developer) without running into problems with pathnames.
To reference a JARFile via variable, go into the "Libraries" tab of the Build Path, remove any existing reference to the library, and click "Add Variable...". You will need to define common variables, such as M2_REPO or LOCAL_LIBS, and you will need to make sure that those definitions are available in all your environments.
Perhaps the problem you're having is with capitalization. Be sure to create the workspace in Ubuntu first. This should rule out any filename capitalization issues.